|
| 1 | 5.1.1 Earth work in excavation in foundation trenches in ordinary soil Ivide classification of soil item A) and disposal of excavated earth a obtained to distance up to 50 mm including all lifts with levelling, ramming the foundation trenches removing roots of trees shrubs all complete as per approved design and per building specification and direction of E/I. |
| 2 | 5.10.1 Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 3 | 5.1.8 Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 4 | 5.1.10 Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, lab our, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 5 | 5.6.3 Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 6 | 5.3.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -all work up to plinth level: (1:2:4) (1 cement : 2 coarse sand (zone III ) : 4 graded stone aggregate 20 mm nominal size ). |
| 7 | 5.3.2.1 Providing and laying in position specified grade of reinforcement cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -all work up to plinth level: (1:1.5:3) (1 cement : 1.5 coarse sand (zone III ) : 3 graded stone aggregate 20 mm nominal size ). |
| 8 | 5.3.9.1 Providing and laying in position specified grade of reinforcement cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -all work up to plinth level: (1:1.5:3) (1 cement : 1.5 coarse sand (zone III ) : 3 graded stone aggregate 20 mm nominal size ). |
| 9 | 5.2.48 Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:6) in foundation and plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 10 | 5.2.52 Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:6) in superstrure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | 5.2.54 Providing designation 112mm thick reinforcement designtion 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:4) in supertructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffoliding raking out joints to 15mm depth curing taxesand royalty ( but excluding theb cost of reinforcement) all complete as per building specification and direction of E/I |
| 12 | 5.3.11 Providing R.C.C (1:1.5:3) in band at plinth -do - all complete as per building specification and direction of E/I |
| 13 | 5.3.10 Providing R.C.C (1:1.5:3) in column -do- all complete as per building specification and direction of E/I. |
| 14 | 5.3.17.1 Centering and shuttering including strutting , propping etc. and removal of form for foundation , footing , bases of columns, etc for mass concrete. |
| 15 | 5.3.17.5 Centering and shuttering including strutting , propping etc. and removal of form for Lintels, beams , plinth beams, girders, bressumers and cantilever. |
| 16 | 5.3.17.6 Centering and shuttering including strutting , propping etc. and removal of form for columns, pillars, piers, Abutments, posts and struts. |
| 17 | 5.3.17.3 Centering and shuttering including strutting , propping etc. and removal of form for suspended floors, roofs, landings, balconies and acess platform. |
| 18 | 5.7.3 Providing 12mm cement plaster (1:6) with clean coarse sand of FM 1.5 including screening curing with all leads and lifts of water ,scaffolding taxes and royalty as per building specification and direction of E/I. |
| 19 | 5.7.11 Providing 1.5 mm cement punning including screening curing with all leads and lifts of water ,scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 20 | 5.7.6 Providing 6 mm thick cement plaster (1:4) in ceiling -do- all complete as per building specification and direction of E/I |
| 21 | 5.5.5 a Providing Tor steel reinforcement of 10mm., 12mm & 16mm dia. bars as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position (excluding carriage of bar to work site ) all complete as per building specification and direction of E/l.TMT Coil Fe 500 (Only Valid for TATA Tiscon), SAIL, JSPL, Electro steels Ltd. Bokaro and Vizag (RINL) |
| 22 | 13.47 DSR Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 kg/10 sqm 13.47.1 |
| 23 | 5.5.29 Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I |
| 24 | 5.8.19 Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 25 | 5.6.23.4 Providing and laying 6 mm pre - cast white glazed tiles in wall -do- all complete as per building specification and direction of E/I. |
| 26 | 11.37 DSR Providing and laying glazed ceramic tiles in flooring -do- all complete as per building specification and direction of E/I. |
| 27 | 5.8.41 Providing primer one coat of red lead paint -do- all complete as per building specification and direction of E/I. |
| 28 | Providing two coat of synthetic enamel paint -do- all complete as per building specification and direction of E/I. |
| 29 | Designing, fabricating, testing, installing and fixing in position CurtainWall with Aluminium Composite Panel Cladding, with open grooves forlinear as well as curvilinear portions of the building , for all heights and alllevels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural andfunctional design.(b) Providing, fabricating and supplying and fixing panels of aluminiumcomposite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel materialconsisting of 3 mm thick FR grade mineral core sandwiched betweentwo Aluminium sheets (each 0.5 mm thick). The aluminium compositepanel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shadeon face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather siliconesealant, backer rods etc. |
| 30 | Providing and fixing factory made PVC door Shutter….....do…....E/I. |
| 31 | S/F/F viterous white glazed earthen wave 1 W.C of parry hindustan…..580 mm long with 12.5 Ltr. - do - all complete as per specification and direction of E/l. |
| 32 | S/F/F flat back or angular lipped front viterous white glazed earthen wave urinal of hindustan 'parry' - do - all complete as per specification and direction of E/l. Flat back or standing corner (600 mm x 350 mm) |
| 33 | S/F/F viterous white glazed earthen wave wash hand basin of parry hindustan - do - all complete as per specification and direction of E/l. |
| 34 | Supplying materials and labours for constructing inspection chamber of des. 75 B brick internal size (600 mm x450 mm x 750 mm) - do - all complete as per specification and direction of E/l. |
| 35 | P/V and placing on terrace polythlene water storage tank - do - all complete as per specification and direction of E/l. |
| 36 | Supplying the following bathroom fittings - do - all complete as per specification and direction of E/l. Angular stop cock (long thread) |
| 37 | Paper holder V.I.P |
| 38 | P/F CPVC pipes having thermal stability for hot and cold water supply - do - all complete as per specification and direction of E/l. |
| 39 | P/F CPVC pipes having thermal stability for hot and cold water supply - do - all complete as per specification and direction of E/l. 15 mm dia. |
| 40 | 20 mm dia. |
| 41 | Making soak pit 2.5 m dia 3.0 m deep with 45 x 45 cm dry brick honey comb - do - all complete as per specification and direction of E/l. |
| 42 | S/F/F health excel (shower) - do - all complete as per specification and direction of E/l. |
| 43 | P/V and laying of 110 mm dia PVC pipe for outlet of water to incl. all accessories - do - all complete as per specification and direction of E/l. |
| 44 | P/F PVC pipe fitting with all accessories - do - all complete as per specification and direction of E/l. 110 mm plain tee (supreme) PVC |
| 45 | 110 mm door Tee |
| 46 | 110 mm plain band |
| 47 | 110 mm coil (supreme) |
| 48 | 110 mm plain floor traq |
| 49 | 110 mm Door band |
| 50 | P/F male ended 15 mm dia brass bib cock of app. Quality ( wt. not less than 350 gms) - do - all complete as per specification and direction of E/l. |
| 51 | P/F G.M non return valve horizontal / vertical - do - all complete as per specification and direction of E/l. |
| 52 | S/F/F the following item - do - all complete as per specification and direction of E/l.(a) Mirrors of 6 mm thick plate glass bevelled edge mirror |
| 53 | (b) Glass shelf with C.P brass rail (450 mm x 125 mm) |
| 54 | (c) C.P brass soap dish container medium quality |
| 55 | Wiring for light point/fan point/ exaust fan point / call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plat, suitable size G.I. box etc. as required. JSR 1.3.3 |
| 56 | Supply and fixing of 5/6 A one way Modular Type switch in existing board. JSR 1.24.1 |
| 57 | Supply and fixing of 5/6 A 3Pin Modular socket in existing board. JSR 1.24.4 |
| 58 | Supply and fixing of 15/16 A one way Modular Type switch in existing board. JSR 1.24.3 |
| 59 | Supply and fixing of 15/16 A 6Pin Modular socket outlet in existing board. JSR 1.24.4 |
| 60 | Supply and Fixing of 2pin 5 A ceiling Rose. JSR 1.33 |
| 61 | Supply and fixing of PVC/GI box of 4\\"x4\\". JSR 1.22.1 |
| 62 | 4 Way SPN, Double door MCB DB. JSR 2.8.2 |
| 63 | S/F 'C' Series, MCB 50/63 A DP. JSR 2.12.7 |
| 64 | S/F 'C' Series, MCB 6/32A A Single Pole. JSR 2.12.1 |
| 65 | Installation, Testing & commissioning of fluorescent direct on surface JSR 1.41 |
| 66 | Wiring for ckt/ submain wiring with earth wire (2x1.5sqmm + 1x1.5sqmm cu flexible cable). JSR 1.7.2 |
| 67 | 2x4Sqmm + 1x4 sqmm earth wire JSR 1.7.3 |
| 68 | 20/22 W LED Batten M-854 |
| 69 | Earthing with Gl earth pipe 4.5 mtr. Long, 40 mm dia including accessories and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. JSR 3.2 |
| 70 | Supply of 1200mm Ceiling Fan |
| 71 | S/F Modular type electronic fan regulator: Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. JSR 1.25 |
| 72 | Supply & fixing 20A SPN MCB Industrial Socket Outlet :- JSR 2.18 |
| 73 | Carriage of materials:- Cement lead 3 km |
| 74 | Sand (Barakar) lead 35.0 km Qty |
| 75 | Stone Chips lead 17 km Qty |
| 76 | Brick (lead 8.0 Km ) |
| 77 | Steel (Lead 3.0 km) |
| 78 | Add 18% GST |
| 79 | Add 1% Labour Cess Please Enable Macros to View BoQ information |
