|
| 1 | Demolition of brick work built in cement mortar of any description including all quions arches, pillars etc complete all as specified and directed. |
| 2 | Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed |
| 3 | Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed |
| 4 | M&L for 30mm thick flush shutter,solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 5 | S&F 35 mm thick factory made 2nd class hard wood glazed and skelton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats,chemically pressure treated complete all as specified and directed |
| 6 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed.Note : Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 7 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face as per specification & drawing, complete all as specified and directed |
| 8 | S&F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and directed |
| 9 | M&L in repair for fabrication and fixing of powder coated anodised window and ventilator openable type with frame of section 85mm x 44.50mm x 1.56mm with shutter style and rail orf powder coated aluminium section of size 47.62mm x 44.45mm x 1.62mm including joining cleat for fixing builder hardware glazing clips rubber packing for air lock purpose anodized aluminium strip beading screw etc for fixing glass panes in framesshutter strip beading screw etc for fixing glass panes in frame shutter covered with fully selected quality glass 4mm thick with rubber packing complete each shutters of window shall be provided with one aluminium tower bolt and one handle of size 150mm, two stainless steel hinges of size 100mm, aluminium stay 01 No, 2 Nos 150mm aluminium tower bolt with etc complete all as specified and directed |
| 10 | S&F powder coated aluminium grills of bar size 6mm x 5 mm with square gap of size 75mm fixed with suitable aluminium channel of size 12-15 mm section complete all as specified and directed . |
| 11 | S&F in repair mild steel 300mm ordinary rat tail rod pattern springs incliding roller and roller plate complete all as specified and directed |
| 12 | S&F in repair sheet glass shelf assembly 60cm long, 12cm wide, made out of 5.5 mm thick glass with CP bracket guard and railing, fancy type, fixed to plug with CP screws and cup washer complete all as specified and directed. |
| 13 | M&L for 3mm thick figured (one side) glass ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed |
| 14 | S&F in repair 18/19mm thick prelaminated medium density fibre board, commercial type, interior grade adhesive as in cup board shutters / shelves and pelmets etc fixed with screw / nails including 4mm thick teak wood lipping duly french polished alround complete all as specified and directed. |
| 15 | M&L 12mm thick coloured MDF board with hardwood fibres prelaminated both sides including cutting, screwing as in kitchen cabinet, almirah shelf, wadrobe, including teakwood liping 6mm thick with necessary lipping complete all as specified and directed. |
| 16 | S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed. |
| 17 | S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed. |
| 18 | S&F in repair 75mm hasp and staple safety type mild steel , wire type stove enamelled black including bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 19 | S&F 150mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy fixed complete all as specified and directed |
| 20 | M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed |
| 21 | Description same all as per item No 20 here-in-before but except brick (brick used obtained from demolition) complete all as specified and directed |
| 22 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on any radius built in CM 1:4 in half brick thick walls complete all as specified and directed |
| 23 | Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed |
| 24 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 25 | M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface complete all as specified and directed |
| 26 | M&L for rendering 10mm thick in CM 1:3 on ceiling surfaces of RCC or brick complete all as specified and directed. |
| 27 | M&L for Sunken Floor Treatment as in following sequence:- (a) The surface of Sunken floor is to be properly cleaning the dust,durt and any other foreign material,fungus moss etc from the surface. (b) M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of sunken area when concrete is green. (c) Applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986. (c) M&L for APP based polymeric water proofing membrane of 3mm thick (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap,sealing all overlaps including at all junction and corners with bonded to the surface by fusing and bonding torchon method complete all as specified and directed. |
| 28 | M&L for cement concrete 1:5:10 type E2 (40mm graded aggregate) as in sunken filling and mass concrete works complete all as specified and directed. |
| 29 | M&L for 32mm bore galvanised steel tubes 'medium grade' as in sunken spout pipe complete all as specified and directed. |
| 30 | Cutting holes in full brick walls, built in cement mortar for inserting of sunken pipe , holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed. |
| 31 | Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed |
| 32 | Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed |
| 33 | Demolition of mud in roofs, any thickness, including plastering and leeping complete all as specified and directed (whether full thickness removed or only a part thereof) |
| 34 | Removing of surplus excavated/demolised materilas to a distance n.exc 50m and deposited where directed at a level n. exc 1.5 m above the starting point. complete all as specified and directed |
| 35 | M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. (Note - Average thickness shall not exceed 40mm complete all as specified and directed |
| 36 | M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:4 complete all as specified and directed |
| 37 | M&L for normal water proofing treatment on roof slab consisting with following operations complete all as specified and directed :-(i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wir brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Lit/m2 on the surface. Laying 3mm thick APP membrane habing non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm ie overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor (Note- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers'(ii) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane.(iii) Dusting dry sand @ 0.75 Kg per Sqm over the membrane indicated above. |
| 38 | M&L for preparation of new or previously untreated surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of aluminium paint, complete all as specified and directed. |
| 39 | Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI) of internal dia 75/110mm, set in cement mortar complete all as specified and directed. |
| 40 | S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110 mm bore complete all as specified and directed. |
| 41 | S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified and directed. |
| 42 | S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed |
| 43 | S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed |
| 44 | S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl of size 410mm x 330 mm x 160mm complete all as specified and directed |
| 45 | S&F in repair stainless steel plate rack (utensil rack) of size 900mm X 750mm X 260mm made out of stainless steel 0.63mm thick fixed with brass screw complete all as specified and directed |
| 46 | M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast,Coping errection of posts etc complete all as specified and directed |
| 47 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with screw are galvanised wire staple complete all as specified and directed. |
| 48 | S&F 100mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed. |
| 49 | S&F 100mm long stainless steel butt hinges with steel pin complete all as specified and directed. |
| 50 | S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 51 | S&F for 150mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 52 | S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed. |
| 53 | S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed. |
| 54 | S&F 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed. |
| 55 | S&F in repair aluminium door strip with brush fixed as in door bottom fixed with nails or screw complete all as specified and directed. |
| 56 | S&F MS framed work as in doors frame,doors or gates of angle iron, door frame or other section with gusset plate, rails, braces, grill, hold fast, barrel iron doors, ladders,frame balusters, walk way, railing, frame work of water tank etc complete, drilled for fixing of steel sheeting or other covering etc. to prepared for hanging or sliding with including either hooks and hinges, also fastening and fixing and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed |
| 57 | S&F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed |
| 58 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass , mounted on 6 mm commercial plywood thick and fixed to wooden plugs with chromium plated brass screws and cups washer complete all as specified and directed. |
| 59 | S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and specified. |
| 60 | Dismantling mild steel work of any description in any position complete all as specified and directed. |
| 61 | M&L preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with paint sprayer machine, complete all as specified and directed. |
| 62 | Preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with paint sprayer machine complete all as specified and directed. |
| 63 | Demolition of cement concrete of any desription and in any position not otherwise specifically provided for complete all as specified and directed. . |
| 64 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 65 | M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling /sub base of flooring complete all as specified and directed. |
| 66 | M&L for 7 to 8 mm thick Non Skid Ceramic Coloured Tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 67 | M&L for joint free glazed ceramic coloured tiles of size 350 x 250mm / 450 x 300 mm and 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 68 | M&L for 20 mm thick black granite (dark coloured) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and making hole for cooking gas pipe complete all as specified and as directed. |
| 69 | M&L for Endura floor tile size 300mm x 300mm x 10mm thick and 25 mm thick laying in floor jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) as per manufacturer instruction complete all as specified and directed |
| 70 | M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coats oil bound distemper of any colour over a coat of 1mm wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed. |
| 71 | M&L for preparing of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed. |
| 72 | M&L for preparation of newly plastered surfaces of walls applying two coats of exterior weather proof anti algae (Product : Asian Paints Apex) 100% acrylic emulsion over a coat of exterior water based primer. The primer and paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed, Make : Asian Paint or equilvalent of makes as approved. |
| 73 | Complete removal of existing treatment i.e. white wash, colour wash, distempering etc of wall complete, applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc as per manufacturer's instructions complete all as specified and directed, Make - Birla / JK white and applying two coats of oil bound distemper (any colour) |
| 74 | Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and ceiling complete, with help of hand opeated sander or by manual where it is feasible and preparing the surfaces smooth including necessary repair to depressions/cracks by wall care putty/POP and applying two coats of exterior weather proof anti algae (Product : Asian Paints Apex) 100% acrylic emulsion over a coat of exterior water based primer. The primer and paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed, Make : Asian Paint or equilvalent as approved. |
| 75 | M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying two coat of white wash on wall complete all as specified and directed. |
| 76 | S&F in repair two way angle valves /tap with flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 77 | S&F in repair Brass CP central hole mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB complete all as specified and directed |
| 78 | S&F in repair vitreous china wash down water closet of \\"Orissa\\" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed. |
| 79 | S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed. |
| 80 | Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 81 | Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 82 | S&F UPVC water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 83 | S&F UPVC water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 84 | S&F in repair vitreous china wash hand basin white, flat back of size 550mm x 400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed. |
| 85 | S&F in repair for 15mm bore fancy type bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed |
| 86 | S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. |
| 87 | S&F in repair CP Stop valve/angle valve 15 mm bore, fancy type cromimum plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed. |
| 88 | S&F in repair rotational moulded, multilayer HDPE water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc complete all as specified and as directed. |
| 89 | S&F in repair rotational moulded, multilayer HDPE water storage tank of 500 ltrs capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc complete all as specified and as directed. |
| 90 | S&F in repair 20mm gun matal ,glove or gate valve with iron wheel head , srcrewed both ends for iron pipe and fixed complete all as specified and directed |
| 91 | S&F in repair PVC waste pipe 32mm dia, 60 cm long for WHB/urinal with cup, complete all as specified and directed |
| 92 | S&F in repair PVC connection 15 mm size with P.T.M.T nuts of length 450mm complete all as specified and directed |
| 93 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed |
| 94 | M&L for 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints etc complete all as specified and directed |
| 95 | M&L PCC 1:4:8 type D2, using (40mm graded aggregate) ,75 mm thick as in sub base of flooring complete all as specified and directed |
| 96 | M&L machine cut Kota stone slab flooring 20-25mm thick over 15mm screed bed (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and including granite polish on Kota slab stone complete all as specified and directed |
| 97 | Description same all as per item No No 96 here-in-before but on vertical surface such as dado, skirting etc over 10 mm thick skirting in CM 1:4 |
| 98 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete alll as specified and directed. |
| 99 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.Note : Credit for this items shall be made as per conditions separately. |
| 100 | Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed |
| 101 | Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping with its all accessories complete all as specified and directed |
| 102 | M&L for point wiring with FRLS/FRLSH PVC insulated unsheathed stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade concealed conduit with all fixing accessories of 20mm dia, and including modular sunken box, cover plate / frame for any module as required at site with all accessories and making good to disturbed conceal surfaces complete all as specified and directed for the following :- Note:- (a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire. (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface. |
| 103 | Description same all as per item No No 102 here-in-before but for one 5 pin 5 Amp socket outlet point on an independent board with cable of size 2.5 sqmm. |
| 104 | Description same all as per item No No 102 here-in-before but for one 5 pin 5 Amp socket outlet point on the same board with other switch and cable of size 2.5 sqmm. |
| 105 | Description same all as per item No No 102 here-in-before but for one bell/buzzer point controlled by one bell push single pole one way |
| 106 | Description same all as per item No No 102 here-in-before but for one light point controlled by two two-way switches. |
| 107 | Description same all as per item No No 102 here-in-before but for one 6 pin 15/16 Amps socket outlet point on an independent board with cables of size 2.50sqmm. |
| 108 | S&F modular switch 1 way, 6 Amps, 230V AC, one way complete all as specified and directed. |
| 109 | S&F modular socket out let 2-in-1, 3 pin, 6 Amps flush type 2 module complete all as specified and directed |
| 110 | S&F modular switch flush type 16 Amps, 230V AC single pole one way complete all as specified and directed |
| 111 | S&F modular socket out let 2-in-1, 3 pin, 5 & 16 Amps flush type 2 module complete all as specified and directed |
| 112 | S&F modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size including connection complete all as specified and directed |
| 113 | S&F Lamp holder PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 114 | S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed. |
| 115 | S&F modular bell push flush type 6 Amps, 1 module SP , 230V AC complete all as specified and directed |
| 116 | S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed |
| 117 | S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 118 | S&F MCB Single Pole and neutral, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed. |
| 119 | S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'B' Curve complete all as specified and directed. |
| 120 | Taking down existing old /worn out tube/CFL/bulk head/sketch light fittings of indoor type fixed on wall of any type/size with its all accessories including lamp complete all as specified & directed |
| 121 | S&F 1 x 10 Watt LED Mirror light fitting, LED 6000 K, Decorative Indirect up-down light for mirror and as wall light application with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed, Make : Havells IVORY Model No LHESABP7IN1W009 or equivalent of Philips/Crompton Greaves. |
| 122 | S&F 1 x 10 Watt LED Bulk head light fitting, LED 600 lumen, enclosed in polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed, Make : Philips ENDURA Model No WT202W LED6S CW PSU S1 PC or equivalent of Havells / Crompton Greaves. |
| 123 | S&F 1 x 18 Watt LED wall mounted tube light fitting, LED 6000K, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed, Make : Bajaj/Philips/Crompton Greaves. |
| 124 | S&F 36 Watt Road lighting luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and connecting with three core flexible copper wire of size 23/0.0076 from ceiling rose to existing junction box complete all as specified and directed, Make : Philips Cat No BRP409 LED CW 036 MR FG S1 PSU GR or Bajaj/Crompton Greaves. Please Enable Macros to View BoQ information |
| 125 | S&F 36 Watt Road lighting luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and connecting with three core flexible copper wire of size 23/0.0076 from ceiling rose to existing junction box complete all as specified and directed, Make : Philips Cat No BRP409 LED CW 036 MR FG S1 PSU GR or Bajaj/Crompton Greaves. Please Enable Macros to View BoQ information |
