|
| 1 | Rewinding of 25 HP motor of approved make including testing, removing, re-assembling, making in good condition, carriage etc. with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency). |
| 2 | Repairing of 25 HP motor pump set parts like Impeller shaft, shaft sleene, Packing, Vane, Casing, Casing wear ring etc and replacement of defective parts. Complete with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency). |
| 3 | Rewinding of 10 HP Sump motor of approved make including testing , making in good condition etc. I/c removing and fixing of pump seal with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency). |
| 4 | Rewinding of 7.5 HP Sump motor of approved make including testing ,making in good condition, etc. I/c removing and fixing of pump seal with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency). |
| 5 | Rewinding and repairing of 5 HP mono submersible pump including replacement of pump gasket, ball bearing, roter sleeve, bearing bush and impeller repairing, rebalancing, etc. I/c removing and fixing of pump seal with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency). |
| 6 | Rewinding of 1.5 HP sump moter of approved make including replacement and repairing of ball bearing, greasing, removing, refixing, carriage etc I/c removing and fixing of pump seal with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency). |
| 7 | Rewinding/overhauling/repairing of 3 HP mono block submersible pump including replacement of pump gasket, ball bearing greasing , etc I/c removing and fixing of pump seal complete including lifting and carriage as approvd by Engineer-in-charge.(Credit of Dismentled material goes to agency). |
| 8 | Rewinding/overhauling/repairing of 2 HP mono block submersible pump including replacement of pump glass set, ball bearing greasing , etc I/c removing and fixing of pump seal complete including lifting and carriage as approvd by Engineer-in-charge.(Credit of Dismentled material goes to agency). |
| 9 | Providing and replacing fluid level controller of CE made totally concealed item for sump pump motors for automatic functioning as per direction and entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency). |
| 10 | Providing and replacing 32A,Three Pole MCB of L&T make or equivalent for 10 HP & 7.5 HP pump set panel as per direction and entire satisfaction of Engineer - in - charge.(Credit of Dismentled material goes to agency). |
| 11 | providing and replacing following accessories in the control panel of the 25HP,10HP, 7.5HP, 1.5HP motors or submersible pump as per satisfaction of Engineer-in-charge .(Credit of Dismentled material goes to agency). (a) 40Amp Contactor ML2 type of L&T Make for 25HP motor |
| 12 | Contactor MNX25A L&T Make for 10HP motor |
| 13 | Contactor MNX22A L&T Make for 7.5HP motor |
| 14 | Contactor MNX09A L&T Make for 1.5HP motor |
| 15 | Over Load Relay range 20-33 amp for 25 HP motor |
| 16 | Over Load Relay range 9-15 amp for 10 HP motor |
| 17 | Over Load Relay range 6-10 amp for 7.5/3HP motor |
| 18 | Over Load Relay range 4.5-7.5 amp amp for 1.5 HP motor |
| 19 | Timer of 0-60 second rating of GIC or MINI Lac Make |
| 20 | Single Phase preventor VSP2 type of MINI LAC make |
| 21 | Providing and fixing of ball bearing suitable for mody/KSB make sewage drainage submersible electric pump etc. as required and as per the direction and satisfaction of Engineer-in-charge. A) Upper Bearing 10/7.5HP |
| 22 | b) Lower Bearing 10/7.5 HP |
| 23 | Providing and fixing push button with element BCH/L&T Vaishno mak 22.5mm dia cartage labour charge for fixing the push button i/c cartage etc as per direction of Engineer-in-charge. |
| 24 | Providing and replacing volt meter 96x96 sq mm (0.500 volts) of A.E. (automatic electric) siemers or equivalent made complete as per direction of Engineer –in-charge. |
| 25 | Providing and replacing Amper meter 96x96sqmm (0.30Amp) of make A.E. (automatic electric) siemers or equivalent complete as per direction of Engineer-in-charge. |
| 26 | Providing and fixing indicating lamp 22.5mm dia BCH make labour charges for removing and fixing the lamp i/c cartage testing etc as per direction of Engineer-in-charge. |
| 27 | Installation/lowering of sewage/drainage/clear water submersible pump set upto 10HP capacity with the help of chain pully and triport in sump/tubewell connection of delivery pipe line. Electric cable, testing etc. as required as per the direction of Engineer-in-charge. |
| 28 | Lifting and taking out of sewage/drainage / clear water submersible pump set upto 10HP capacity with the help of chain pully and triport in sump/tubewell connection of delivery pipe line. Electric cable, testing etc as required as per the direction of Engineer-in-charge. |
| 29 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia pipe. |
| 30 | Supply , installation , testing and commissioning of non clog electric dewatering sewerage submersble vertical pump of capacity 3 HP, 2.2 KW, 3 phase, having minium 20mm solid handling and having minium discharge 550 LPM for 10 m head at 50mm delivery size of make Kirloskar / KSB/crompton all complete up to entire satisfaction of engineer-in-charge. ( The old unserviceable 3 HP pump is the property of agency) |
| 31 | Supplying of sewage submersible pump make of Crompton / CRI / Kirloskar/KSB having capacity 2 HP Single Phase along with 6 mm 3 core flat cable of length 30 Metre and starter of make L&T or equivalent at the service centre for dewatering runoff as per direction and entire satisfaction of Engineer -in Charge with the following specification.Head 5-15 MetersDishcharge capacity 400-65 LPMVoltage: 230V RPM :3000-2600Frequency: 50 HZ |
| 32 | Supply of Cotton Canvas pipe for delivery having size of 50mm dia of make Jyoti/ tuffline or equivalent at service centre all complete coupling acceseries required for above pumps as per direction and entire satisfaction of Engineer-in-charge Please Enable Macros to View BoQ information |
