|
| 1 | S/RLabour Charge for Cleaning the Site. |
| 2 | 12.45.1 DSRProviding and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel DSR 12.4512.5 mm thick tapered edge gypsum plain boardconforming to IS: 2095- Part I DSR 12.45.1 |
| 3 | 14.87 DSRProviding and laying APP (Atactic Polypropylene) work….....do….....E/I. |
| 4 | DSR 13.26Providing and applying Plaster of Paris Putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 5 | 5.8.21Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 6 | 5.8.31Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 7 | DSR 12.41.2Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia |
| 8 | DSR 12.42Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Bend 87.5 degree 110x110x110mm |
| 9 | 12.44Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less thaN 440 grams. |
| 10 | DSR 12.43.2Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means 50X50X50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc. complete - 110mm |
| 11 | DSR 21.3.2 Providing & fixing GLAZING IN ALUMINIUM - do -do- all complite job |
| 12 | 3.1.5.1P/F male ended 15 mm dia brass bib cock of app. Quality ( wt. not less than 350 gms) - do - all complete as per specification and direction of E/l. |
| 13 | DSR 18.7.3P/F CPVC pipes having thermal stability for hot and cold water supply - do - all complete as per specification and direction of E/l.(25 mm dia) |
| 14 | DSR 18.8.1P/F CPVC pipes having thermal stability for hot and cold water supply - do - all complete as per specification and direction of E/l. 15mm dia |
| 15 | 20 mm dia |
| 16 | M 856LED Bulb (15/16W) |
| 17 | M 832Round Down Light 18W |
| 18 | JSR 1.48ITC Exhaust Fan upto 450 mm sweep: installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required. JSR 1.48 |
| 19 | M 777 16'' Wall mounted Fan |
| 20 | M 772Supply of 1200mm Ceiling Fan |
| 21 | 1.3.3Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size GI box and earthing the point etc as required.Group C 1.3.3 |
| 22 | 1.24.1Supply and fixing of 5/6 A one way Modular Type switch in existing board. JSR 1.24.1 |
| 23 | 1.24.3Supply and fixing of 15/16 A one way Modular Type switch in existing board. JSR 1.24.3 |
| 24 | 1.24.5Supply and fixing of 15/16 A 6Pin Modular socket outlet in existing board. JSR 1.24.4 |
| 25 | 1.33Supply and Fixing of 2pin 5 A ceiling Rose. JSR 1.33 |
| 26 | 1.25S/F Modular type electronic fan regulator: Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. JSR 1.25 |
| 27 | 1.22.1Supply and fixing of PVC/GI box of 4\\"x4\\". JSR 1.22.1 |
| 28 | 1.15.2Supply and drawing of 2x1.5 Sqmm Cu flexible cable in existing surface /recessed steel/PVC conduit. |
| 29 | 1.7.2Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 2x1.5 Sqmm + 1x1.5 sqmm earth wire JSR 1.7.1 |
| 30 | 1.7.32x4Sqmm + 1x4 sqmm earth wire JSR 1.7.3 |
| 31 | 1.7.42x1.5 Sqmm + 1x1.5 sqmm earth wire JSR 1.7.1 |
| 32 | 1.27.1S/F Modular Boxes, base & cover plate: Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (78 mm x 78 mm x 45 mm) JSR 1.27.1 |
| 33 | M 85420 W LED Batten |
| 34 | 2.18Supply & fixing 20A SPN MCB Industrial Socket Outlet :- JSR 2.18 |
| 35 | 2.12.1S/F 'C' Series, MCB 6/32A A Single Pole. JSR 2.12.1 |
| 36 | M832Supply of Recess mountain LED square Down Light (18/20W). |
| 37 | Add 18% GST |
| 38 | Add 1% Labour Cess Please Enable Macros to View BoQ information |
