|
| 1 | M&L for brick work in CM ( 1:4 ) with using fly ash bricks modular size straight or curved on plan exceeding 6.0mtr mean radius including demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed. |
| 2 | M&L for brick work in CM ( 1:4 ) with using half fly ash brick modular size straight or curved on plan exceeding 6.0mtr mean radius including demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed. |
| 3 | M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound including taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.Note: WPC shall be measured and paid separetly. |
| 4 | M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement including taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 5 | M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement including taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 6 | Supply only Liquid water proofing compound (WPC) complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 1.5mm to 2mm thick JK/BIRLA white putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion ) white or tinted over a coat of white water base primer complete all as specified and directed by Engr-in- Charge. Make : Berger'/Asain Apex/or make as approved by GE. |
| 8 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed. |
| 9 | M&L for applying two coat of oil bound distemper over a coat of 1.5mm to 2mm thick wall care putty on new plaster surface of walls after preparation of surfaces.Make(Putty) : JK/Birla/make as per PS as approved by GE. |
| 10 | M&L for preparation of new surfaces of wall and applying three coats of white wash on ceiling and cornices complete all as specified and directed. |
| 11 | M&L for complete removal of existing treatment of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured over a coat of oil base base primer over one coat of white cement based putty (where it is required) complete all as specified and directed.Make(Putty) : JK/Birla/make as per PS as approved by GE. |
| 12 | M&L for preparation of old decorated surfaces of wall including brooming, scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over one coat of white cement based putty (where it is required) all as specified and directed. |
| 13 | M&L for complete removal of existing treatment on old decorated surface of wall and applying two coats of oil emulsion distemper white/coloured over one coat of cement putty (where it is required) complete all as specified and directed by Engr-in-Charge.Note: Putty shall be measured and paid seperately. |
| 14 | M&L for one coat of 2mm thick wall care putty (2 coats of 1mm thick each) on walls/ceiling complete all as specified and directed |
| 15 | M&L for preparation of old decorated surfaces of wall including brooming, washing, roubbing scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper complete all as specified and directed. |
| 16 | M&L for preparation of old decorated surfaces of ceiling including brooming, washing, roubbing scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of oil emulsion distemper on ceiling complete all as specified and directed. |
| 17 | M&L for preparation of old painted surfaces of wood or wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 18 | M&L for preparation of old painted steel surfaces or steel based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 19 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land complete all as specified and directed . |
| 20 | M&L for 75 mm thick PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in foundation, sub base of floor, etc complete all as specified and directed. |
| 21 | M&L for 75mm thick cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and directed. |
| 22 | M&L for 25mm thick PCC (1:2:4) type B-0, using 12.5mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and directed. |
| 23 | M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) and dismantling of old existing floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles and rubbish of the primeses complete all as specified and directed. |
| 24 | M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) and dismantling of old existing floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles and rubbish of the primeses complete all as specified and directed. |
| 25 | M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) and dismantling of old existing floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles and rubbish of the primeses complete all as specified and directed. |
| 26 | M&L for glazed ceramic coloured tiles of size 300 x 200 x 7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) and dismantling of old existing floor, hearth, or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish of the primeses complete all as specified and directed. |
| 27 | M&L for glazed ceramic coloured tiles of size 450 x 350 x 7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) and dismantling of old existing floor, hearth, or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish of the primeses complete all as specified and directed. |
| 28 | Dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 29 | M&L for 20-25 mm thick kota stone, machin cut kota stone slab flooring mirror polished over and including 15mm cement screed base laid in CM (1:6), and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. |
| 30 | M&L for 20 mm thick granite (colour as approved) thick machine cut, in floor bedded and jointed with grey ement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and directed. |
| 31 | M&L for 20 mm thick granite (black) thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 10 mm thick backing in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and directed. |
| 32 | S&F in repairs rotational moulded polyethylene water storage tank (two layer) of capacity 500 ltr (Cylindrical/vertical with closed top), ISI marked hoisted & fixed in position, complete all as specified and directed. Make : Sintex/make as per PS approved by GE. |
| 33 | Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed. |
| 34 | S&F in repairs 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed complete all as specified and directed.Note : Min Weight 15mm - 142 gms |
| 35 | S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed complete all as specified and directed.Note : Min Weight 20mm - 210 gms |
| 36 | Taking down steel tubing 15mm bore and connections complete all as specified and directed. |
| 37 | S&F 16mm dia CPVC Pipe SDR 11 & plain CPVC SDR 11 all fittings such as Tee, Bend, Elbow, Socket Reducer etc including jointing and testing concealed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 38 | S&F CPVC Male/Female Brass Threaded Adaptor (MTA/ MBTA or FTA/FBTA) for 16 mm dia pipe complete all as specified and directed. |
| 39 | Taking down steel tubing 20mm bore and connection complete all as specified and directed. |
| 40 | S&F 16mm dia CPVC Pipe SDR 11 & plain CPVC SDR 11 all fittings such as Tee, Bend, Elbow, Socket Reducer etc incl jointing and testing concealed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 41 | S&F CPVC Male/Female Brass Threaded Adaptor (MTA/ MBTA or FTA/FBTA) for 16 mm dia pipe complete all as specified and directed. |
| 42 | M&L for cutting chases, pinning in, making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls, complete all as specified and directed. |
| 43 | S&F in repairs 15 mm long neck bib taps screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed. |
| 45 | S&F in repairs 15 mm two way bib cock with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed complete all as specified and directed. |
| 46 | S&F in repairs stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed. |
| 47 | S&F in repairs pillar taps (swan neck type) cast copper alloy with capstan head, screwed down, high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed. |
| 48 | S&F in repairs 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 49 | S&F in repairs 15mm wall mixture with provision for bath telephone shower and overhead shower complete all as specified and directed. Make : Prayag/Jaquar/ make as per PS approved by GE |
| 50 | S&F in repairs 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed complete all as specified and directed. |
| 51 | S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specified and directed. |
| 52 | S&F in repairs Stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420 mm with bowl size 410 x 330 x 160mm fixed with PVC waste pipe complete all as specified and directed. |
| 53 | S&F in repairs Stainless steel sink with drainage board, 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460 mm with bowl size 410 x 330 x 160mm fixed complete all as specified and directed. |
| 54 | S&F in repairs stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and directed.Note : Size of plate rack should not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each. |
| 55 | S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed. |
| 56 | Taking down and re-fixing WHB/flushing cistern/EWC/ kitchen sink and similar items at same or other location, including cutting for ends and pinning in and ends of brackets or erecting stand but exclusive of fixing of supply and waste pipes, etc complete all as specified and directed. |
| 57 | S&F in repairs vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and directed . |
| 58 | S&F in repairs vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and directed. |
| 59 | S&F in repairs health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and directed. . |
| 60 | S&F in repairs flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc 800mm to 1.00 mm length complete all as specified and directed. |
| 61 | S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and directed. |
| 62 | S&F in repairs brass chromium plated tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed. |
| 63 | S&F in repairs 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified and directed. |
| 64 | S&F in repairs plastic water closet seat cover in white colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed. |
| 65 | S&F in repairs wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & including MS adjustable brackets or erecting stand complete all as specified and directed. |
| 66 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 67 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 68 | S&F in repairs corner glass shelf (with bracket) all as specified and directed. |
| 69 | S&F in repairs 150 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 70 | S&F in repairs chromium plated grating 100mm dia complete all as specified and directed. |
| 71 | S&F in repairs 600x450mm beveled edge mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer complete all as specified and directed. |
| 72 | S&F in repairs 25 mm dia aluminium powder coated drappery curtain rod with brass /nickel chrom polish bracket complete all as specified and directed . |
| 73 | S&F in repairs chromium plated waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut fixed in repair complete all as specified and directed. |
| 74 | Resecuring or easing and adjusting without taking down shutter of any discription not exc 1.0 sqm each, complete all as specified and directed. |
| 75 | Rsecuring or easing and adjusting without taking down shutter of any discription exc 1.0 sqm but nexc 2.0 sqm each, complete all as specified and directed. |
| 76 | S&F in repairs 100mm aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 77 | S&F in repairs 150mm aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 78 | S&F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolt and sliding bolts of extruded section and cast iron - aluminium alloy 300 mm long, complete all as specified and directed. |
| 79 | S&F in repairs 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed. |
| 80 | S&F in repairs 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 81 | S&F in repairs 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 82 | S&F in repairs 50 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 83 | M&L for cutting chases in brick wall built in cement mortar for concealed water tubing and making good with CM (1:4), cutting depth not exc 10 cm complete all as specified and directed. |
| 84 | S&F in repairs 40mm dia cupboard knobes fixed with nuts, screw and washer of MS, bright finshed, complete all as specified and directed. |
| 85 | S&F in repairs floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed. |
| 86 | S&F in repairs Mild Steel Door Spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 87 | S&F in repairs of Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including required all as specified and directed. |
| 88 | Taking down shutters of any description n.exc 1.0 sqm each complete all as specified and directed. |
| 89 | Taking down shutters of any description exc 1.0 sqm but n.exc 2.0 Sqm each complete all as specified and directed. |
| 90 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and directed. |
| 91 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but n. exc 4.0 sqm each complete all as specified and directed. |
| 92 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door Chowkats of size 65 x 125 mm double rebate of virgin PVC polymer of K value 58-60(Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ricehusk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strenght of 2200 N (Face) & 1100 N (Edge) , minimum compressive strenght of 58 N/mm sqr , modules of elasticity 900 N/mm sqr and resistance to spread of flame of Class A category with property of being termite /borer proof , water /mositure prooof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners of required dia and lenght complete all as specified and directed including MS hold fast/lugs or SS dash fasteners etc complete all as specified and directed. |
| 93 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door Chowkats of size 65 x 100 mm double rebate of virgin PVC polymer of K value 58-60(Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ricehusk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strenght of 2200 N (Face) & 1100 N (Edge) , minimum compressive strenght of 58 N/mm sqr , modules of elasticity 900 N/mm sqr and resistance to spread of flame of Class A category with property of being termite /borer proof , water /mositure prooof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners of required dia and lenght complete all as specified and directed including MS hold fast/lugs or SS dash fasteners etc complete all as specified and directed. |
| 94 | S&F factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE FLUSH DOOR SHUTTER of size 30 mm thick comprising of virgin PVC polymer of K value 58-60(Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ricehusk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum , screw withdrawal strenght of 1800 N (Face) & 900 N (Edge) , minimum compressive strenght of 50 N/mm sqr , modules of elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite /borer proof , water /mositure prooof and fire retardant . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed. Note : Stainless steel butt hinges and necessary scews shall be paid seperately. |
| 95 | S&F 30mm thick factory made wire mesh solid WPC door shutter consisting of Density 650 Kg/Cbm manufactured by an ISO-9001-2015 certified company, door to be panelled with SS mosquito wire Mesh and XTN aluminium mesh for additional strenght and safety purpose. (confirming as per IS 4020). The door should be water proof, termite proof, fire retardent and having screw holding capacity. Door to be fixed to frame with 3 Nos MS powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through both the walls of MS tube. Other hardwares should be fixed with 19x6mm size steel screws etc. complete all as specified and directed. |
| 96 | S&F 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 97 | S&F 35 mm thick factory made, 2nd class Hard wood, glazed and skeleton doors shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) Supplied and fitted to chowkats complete all as specified and directed. |
| 98 | S&F 30mm thick factory made, 2nd class hard wood, glazed and skeleton window/ventilator shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8, clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified and directed. |
| 99 | S&F 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 100 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 101 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 102 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 103 | S&F powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper part shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM (1:3) even and smooth complete etc. shifting of existing cooler stand where required complete all as specified and directed by Engr-in-charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min)(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min)(iv) 4 mm thick glass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(Min)(vii) Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix) fixing screw for frame with wall per windows- 08 Nos. |
| 104 | S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM (1:3) finishing even and smooth complete all as specified and directed. |
| 105 | S&F 75 mm Butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and directed. |
| 106 | S&F 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 107 | S&F 100 mm Butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and directed. |
| 108 | S&F Aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed. |
| 109 | S&F extruded aluminium alloy handles fabricated type anodised 150mm size, complete all as specified and directed. |
| 110 | S&F second class hardwood small fittings such as door and window stops and the like n.exceeding 200 cucm each fixed all as specified and directed. |
| 111 | S&F stainless steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples,etc complete all as specified and as directed. |
| 112 | S&F in repairs 18/19mm thick Pre-laminated particle board, Exterior grade, pre-laminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed. |
| 113 | S&F in repairs 18/19mm Veneered particle board, Interior grade, solid core, general purposes type, faced with decorative veneers on one face of type 'BB', fixed with screws to timber frame work complete all as specified and directed. |
| 114 | S&F in repairs veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work 12mm fixed with screws to timber frame work including taking down all as specified and directed by Engr-in-charge. |
| 115 | S&F in repairs block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on both faces for 18/19mm fixed with screws to timber frame work fixed in repairs including taking down all as specified and directed by Engr-in-charge. |
| 116 | S&F in repairs 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade, complete all as specified and directed. |
| 117 | S&F in repairs 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof, water proof and flame retardant PVC sheet,manufactured by single layer extrusion process, complete all as specified and directed. |
| 118 | S&F in repairs 2nd class hard wood Beads, straight (exc 40 Sqcm) for glazed or gauzed joinery, renewed, including mitres etc and removing old beads to Storeif in repairs or if refixed in old position complete all as specified and directed. |
| 119 | S&F in repairs good quality stainless steel self closing hinge of 75 mm size for PVC door shutter complete all as specified and directed. |
| 120 | S&F in repairs 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed. |
| 121 | S&F in repairs 100 mm size MS mat / glossy finish handle complete all as specified and directed. |
| 122 | S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.50 sqm in each pan complete all as specified and directed. |
| 123 | S&F figured glasspine head type 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.50 sqm in each pan complete all as specified and directed. |
| 124 | S&F in repairs Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and directed. |
| 125 | Cleaning of exisiting window glass (both side) with chemical or any other means and removing all stain/spots on it including necessary scafflolding for G+1 floor buildings complete all as specified and directed by Engineer-in-charge |
| 126 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer with and including wood putty, complete all as specified and directed. Please Enable Macros to View BoQ information |
