|
| 1 | Lumpsum price worked out by the tenderer for BUILDINGS / STRUCTURES as listed in Schedule ‘A’ Part-I |
| 2 | Lumpsum price worked out by the tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-II |
| 3 | Lumpsum price worked out by the tenderer for ROAD / PATH / CULVERT as listed in Schedule ‘A’ Part-III |
| 4 | Lumpsum price worked out by the tenderer for ROAD FENCING AND GATE as listed in Schedule ‘A’ Part-IV |
| 5 | Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-V |
| 6 | Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-VI |
| 7 | Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VII |
| 8 | Lumpsum price worked out by the tenderer for FIRE FIGHTING SYSTEM as listed in Schedule ‘A’ Part-VIII |
| 9 | SCHEDULE 'A' PART IX (MISCELLANEOUS ITEMS)Note: This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under column 5 signifies this fact only. |
| 10 | COMPOUND WALL, FENCING AND GATE |
| 11 | Supply and fix 4mm dia GI steel wire PVC coated 75mm x 75mm mesh as in chain link fencing including straining and fixing to posts and to straininig bolts includings securing with and provision of galvanised iron, PVC coated, trying with wire etc., complete all as specified and as directed. |
| 12 | SEWAGE DISPOSAL |
| 13 | Supply and Instalation of Bio Septic tank -10 KL Tank with 3 Partition including 01 No man hole at top of tank, designed to install the chemicals for dispose of sewage sludge including excavation in any type of soil, sand filling, hard core & PCC 1:4:8 below foundation base, brick work in CM 1:4 of side wall for support, sand filling pf balance gap between tank and wall and top surface finished with hard core, PCC 1:4:8 and PCC 1:2:4 as per Drg / as required at site etc, with vent shaft, manhole opening with cover connection for 130 users/10 KLD withever is more etc complete all as specified & as per Drg and directed by GE |
| 14 | EXTERNAL WATER SUPPLY |
| 15 | M&L for dismantling of existing Reverse Osmosis (RO) Plant of 500 Ltrs/Hr capacity along with all connected items carefully without any damage including inlet and outlet pipe connections, electrical wiring, starter, foundation bolts, control panel, and associated accessories, at old CG Air Station – MES Pump House Area and shifting to new designated location as directed, re-fixing and replacing the damaged/unserviceable parts, making all connections (water supply, drain, and electrical etc.,) and testing and commissioning complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Supply, installation, testing and commissioning of centrifugal monoblock pumping set electric driven of 5 HP capacity all as per Cat No. MHPHET5X00 of Havells Pump or equivalent of other specified make capable of delivering 13.50 LPS at total head of 40 mtr with 80mm suction diameter and 65 mm delivery diameter Head with DOL Starter for 5 HP Motor, fixed on suitable MS frame with necessary PCC foundation etc., complete all as specified and as directed. |
| 17 | Supply and fix gun metal Check valve 50 mm dia, heavy duty, both end threaded and leaf spring loaded vertical type including taking down unserviceable foot valve / check valve from the suction pipe of the pump set complete all as specified and as directed. |
| 18 | EXTERNAL ELECTRIC SUPPLY |
| 19 | Supply, installation, commissioning and testing of LT panel board outdoor type 440 volts, 3 phase, 4 wire, 50 cycle per second, AC supply comprising of 630 Amps capacity Aluminium bus bar for the 3 phase and neutral, both side opening along with locking arrangement,rainguard canopy system, with ventilations fabricated out of steel sections i.e 3.0 mm thick CRCA sheet with angle iron of size 40x40x6mm thick . The construction of panel shall be dust and vermin proof with phosphatised powder coated painting externally and internally to protect against corrosion. with PCC (1:2:4), Digital multi function meters with necessity CTs complete with cable duct ground clearance 45 cm from grouting bolts with following accessories:- [LT panel for Xmer] |
| 20 | (i) INCOMING:- ACB 4 Pole, 415 V, Manual Drawout type with microprocessor release of capacity 630 Amps - 01 No.(ii) OUTGOING:-(a) MCCB 4 Pole, 415 V, Adjustable type, 400 Amps, 36 KA - 02 Nos.(b) MCCB 4 Pole, 415 V, Adjustable type, 350 Amps, 36 KA - 03 Nos.(c) MCCB 4 Pole, 415 V, Adjustable type, 250 Amps ,36 KA - 01 Nos.(d) MCCB 3 Pole, 100 Amp,with Fixed TM,415 volt, 16 KA - 01 Nos.(e) MCCB 3 Pole, 63 Amp,with Fixed TM,415 volt, 16 KA - 01 Nos. (iii) Indicator Lamp Set of 03 - 01 No |
| 21 | Supply, installation, commissioning and testing of LT panel board outdoor type 440 volts, 3 phase, 4 wire, 50 cycle per second, AC supply comprising of 630 Amps capacity Aluminium bus bar for the 3 phase and neutral, both side opening along with locking arrangement,rainguard canopy system, with ventilations fabricated out of steel sections i.e 3.0 mm thick CRCA sheet with angle iron of size 40x40x6mm thick . The construction of panel shall be dust and vermin proof with phosphatised powder coated painting externally and internally to protect against corrosion. with PCC (1:2:4), Digital multi function meters with necessity CTs complete with cable duct ground clearance 45 cm from grouting bolts with following accessories :- (LT panel for DG Set). |
| 22 | (i) INCOMING:-MCCB 4 Pole, 415 V, Adjustable type, 350 Amps, 36 KA - 02 Nos.(ii) Automatic Transfer Switch 4 Pole, 415 V, 315 Amps Auto/Manual with complete protection -01 Nos.(iii) OUTGOING:-(a) MCCB 4 Pole, 415 V, Adjustable type, 200 Amps, 36 KA - 01 No.(b) MCCB 4 Pole, 415 V, Adjustable type, 160 Amps, 36 KA - 01 No.(c) MCCB 3 Pole, 125 Amp,with Fixed TM,415 volt, 16 KA - 01 No.(d) MCCB 3 Pole, 25 to 100 Amp,with Fixed TM,415 volt, 16 KA - 03 Nos.(iv) Indicator Lamp Set of 03 - 01 No |
| 23 | Supply, installation, commissioning and testing of LT Feeder pillar box outdoor type 440 volts, 3 phase, 4 wire, 50 cycle per second, AC supply comprising of 630 Amps capacity Aluminium bus bar for the 3 phase and neutral, both side opening along with locking arrangement,rainguard canopy system, with ventilations fabricated out of steel sections i.e 3.0 mm thick CRCA sheet with angle iron of size 40x40x6mm thick . The construction of panel shall be dust and vermin proof with phosphatised powder coated painting externally and internally to protect against corrosion. with PCC (1:2:4), Digital multi function meters with necessity CTs complete with cable duct ground clearance 45 cm from grouting bolts with following accessories for Genset Feeder Near crew room :- |
| 24 | (i) INCOMING:- MCCB 4 Pole, 415 V, Adjustable type, 350 Amps, 36 KA - 01 No.(ii) OUTGOING:-(a) MCCB 3 Pole, 125 Amp,with Fixed TM,415 volt, 16 KA - 02 Nos.(b) MCCB 3 Pole, 25 to 100 Amp,with Fixed TM,415 volt, 16 KA - 02 Nos.(iii) Indicator Lamp Set of 03 - 01 No. |
| 25 | Supply, installation, commissioning and testing of LT Feeder pillar box outdoor type 440 volts, 3 phase, 4 wire, 50 cycle per second, AC supply comprising of 630 Amps capacity Aluminium bus bar for the 3 phase and neutral, both side opening along with locking arrangement,rainguard canopy system, with ventilations fabricated out of steel sections i.e 3.0 mm thick CRCA sheet with angle iron of size 40x40x6mm thick . The construction of panel shall be dust and vermin proof with phosphatised powder coated painting externally and internally to protect against corrosion. with PCC (1:2:4), Digital multi function meters with necessity CTs complete with cable duct ground clearance 45 cm from grouting bolts with following accessories for Utility Feeder Near crew room :- |
| 26 | (i) INCOMING:- MCCB 4 Pole, 415 V, Adjustable type, 350 Amps, 36 KA - 01 No.(ii) OUTGOING:-(a) MCCB 3 Pole, 125 Amp,with Fixed TM,415 volt, 16 KA - 02 Nos.(b) MCCB 3 Pole, 25 to 100 Amp,with Fixed TM,415 volt, 16 KA - 04 Nos.(iii) Indicator Lamp Set of 03 - 01 No. Please Enable Macros to View BoQ information |
| 27 | (i) INCOMING:- MCCB 4 Pole, 415 V, Adjustable type, 350 Amps, 36 KA - 01 No.(ii) OUTGOING:-(a) MCCB 3 Pole, 125 Amp,with Fixed TM,415 volt, 16 KA - 02 Nos.(b) MCCB 3 Pole, 25 to 100 Amp,with Fixed TM,415 volt, 16 KA - 04 Nos.(iii) Indicator Lamp Set of 03 - 01 No. Please Enable Macros to View BoQ information |
