|
| 1 | Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 3 | Taking down door or window shutter of any description not exc. 2 sqm each complete all as specified and directed. |
| 4 | S&F ramed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 5 | S&F 75x50mm single rebated factory made 100% solid WPC (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed. |
| 6 | S&F 65x100 mm single rebated factory made 100% solid WPC (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed. |
| 7 | S&F 65x125 mm double rebated factory made 100% solid WPC (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed. |
| 8 | S & F of factory made 30 mm thick 100% solid WPC (Wood Polymer Composite) prelam solid both side 14 micron Flush door shutter wit 10mm deep CNC moulding design of required size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and builders hardware except S S screws shall be paid separately) |
| 9 | S & F 30mm thick factory made solid WPC (Wood plastic composit) prelam solid both side 14 micron moulded glazed door shuter with wire mesh in any number of division with XPM Aluminium alloy wire cloth & SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperature 1.4mm shall to be fixed with 15x15 square tube in side rails with screwing 8x28 heat metel zink coated screws can be remove of fix again after changing of wire mesh needed. The density shall be as per manufacture instruction complete all as specified and as directed |
| 10 | S & F of 1.25 mm thick mild steel plain black sheet in wall cladding, steel gate and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted and welded seams as required including bending or turning up, mitred angles etc. as required complete all as specified and directed. |
| 11 | S & F in repairs 18 mm thick solid WPC board one side prelaminated decoratiove teak face and other side white and balancing as in kitchen shelf, shutters etc including chawkats and all fitting accessories etc complete all as specified and directed. |
| 12 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and directed. |
| 13 | S & F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate including welding if required complete all as specified and directed. |
| 14 | S & F powder coated aluminium glazed window shutter sliding type using 1.30 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rils 100x44mm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and glazing shall be done by using 5mm thick plain sheet glass and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.Note : Cost of sheet glass and wire mesh shall be deemed inclusive in quoted unit rate. |
| 15 | S & F Powder coated aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 16 | S & F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 17 | S & F 4.8mm thick sheet glass ordinary quality and glazing with oil putty/Aluminium beads in square exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces ground or obsecured to one side complete all as specified. |
| 18 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apeerture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, all as directed. |
| 19 | S&F M.S framed work such as grills grating etc with ends of bars sholdered and /or riveted into spikes framed guard bars/railing all as specified. |
| 20 | S&F 250 mm long stainless steel sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing with bolt and sliding bolts all as specified |
| 21 | S&F for stainless steel barrel tower bolts 200 mm of extruded section and fixed. |
| 22 | S&F for stainless steel barrel tower bolts 150 mm of extruded section and fixed. |
| 23 | S&F 125 mm size stainless steel handles ISI marked all as specified |
| 24 | S&F 150 mm size stainless steel handles ISI marked all as specified |
| 25 | S&F Butt hinges 125 mm stainless steel hinges medium weight and fixed |
| 26 | S&F Butt hinges 100 mm stainless steel medium weight and fixed |
| 27 | Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 28 | M & L for 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and as like in cement mortar (1:4) of 15mm thick plaster or screed including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified. |
| 29 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 30 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 31 | M & L for brick work with modular fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed. |
| 32 | M & L for mild steel work as in hold fasts, bands, plain angle cleats, clamps, hooks, straps, stay for rain water pipe, pintle hinge, large hasp and staple, clamps conforming to Fe 290 or Fe 310-0 complete all as specified and directed. |
| 33 | M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in hold fast all as specified and directed. |
| 34 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, all as directed. |
| 35 | M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement all as specified and directed. |
| 36 | M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement all as specified and directed. |
| 37 | M&L for Preparation of new plastered surface of wall and applying two coats of OBD over a coat of primer on wall complete all as specified and directed. |
| 38 | M&L for providing and applying white wall care putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 39 | M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 40 | M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed. Please Enable Macros to View BoQ information |
