|
| 1 | M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 (including reinforcement where ever required) and rendering 15mm thick including chicken wire mess as per site requirement in CM 1:3 without using extra cement finished even and fair complete all as specified and directed (Up to second storey bldgs and including necessory formwork and scaffolding) and provision of minimum reinforcement required as per site condition also taking down or dismantling as required at site. |
| 2 | M&L Rendering 15 mm thick in two layers (10+5mm)on fair faces of brick or concrete surface walls in cement mortar 1:4 ,( Upto 10 Mtr height including necessary scaffolding) rendering is to be finished even and fair without using extra cement incl mixing with water proofing compound in 5mm thick layer and including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and as directed |
| 3 | supply only Liquid water proofing compound complete all as specified and directed |
| 4 | M&L Rendering cement plaster, 10 mm thick on fair faces of brick/concrete surfaces of wall in cement mortar 1:6 finished even and smooth w/o using extra cement including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and as directed by Engineer-in-charge. |
| 5 | M&L Rendering 5 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and as directed by Engineer-in-charge. |
| 6 | Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge. |
| 7 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 8 | S&F Aluminium snap grid frame work for false ceiling of size of grid 605 x 605 mm including hangers 6mm dia, GI (upto 1200mm length) adjusting levels fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expension hold fasteners 12.5mm dia, 40mm long complete all as specified. |
| 9 | Material and labour for fixed in repair 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws as in ceiling all as per specified and directed. |
| 10 | S&F in Repair /Replacement Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.47-0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling , asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc as specified. |
| 11 | S&F in Repair /Replacement Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.47-0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Iincluding dismantling , asbestos cement, plain /corrugated or semi-corrugated sheets in roofs, walls etc as specified. |
| 12 | Dismantling timber scantling 40 sqcm and over in section in any position in framed work. |
| 13 | S&F Roof trusses with Steel tubular sections including special shaped washer etc. complete using ERW or induction butt welded tubes,purlins,vertical posts, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats and the rates including drilling, welding, connecting with hold fast, providing & fitting cleats etc, all as specified. |
| 14 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) with riveted, bolted or welded attachment. |
| 15 | M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 16 | Demolition of brick or stone/boulder masonery, built in cement mortar, including all quoins, arches, pillars, etc. and removing unserviceable material from the work site complete all as specified and as directed. |
| 17 | Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 18 | Brick work with subclass 'B' bricks, old size bricks,, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, using old serviceable bricks obtained from demolition, under item no 11 above, complete all as specified and directed. |
| 19 | M&L Providing, cement concrete 1:2:4 Type B-1(20mm graded aggregate)including for use of formwork in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs include for use of formwork all as specified. |
| 20 | M&L Rendering 15 mm thick in two layers i. e. (10+5 mm) on fair faces of brick or concrete surface walls in cement mortar 1:4 , rendering is to be finished even and smooth without using extra cement, including mixing WPC in 5mm th second layer of plaster, complete all as specified and as directed. (External surface of walls). Note :- WPC will be measured and paid separetly. |
| 21 | M&L Rendering 10 mm thick on fair faces of brick or concrete surface walls in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed. (Internal surface of walls). |
| 22 | Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper by using rollers over 3mm thick wall care putty for smoothning of surface complete all as specified and directed. |
| 23 | Preparation of new plastered/ concrete surfaces of walls and applying two coats of cement based paint by using rollers, including one coat of primer (up to 2nd storey with necessary/scaffolding) complete all as specified and asdirected. |
| 24 | S&F 5mm thick plain colour PVC sheet in strips and channels feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixed at site. |
| 25 | S&F in repair curtain rod 20mm dia mild steel chromium plated with heavy duty brackets, including stops, rollers etc |
| 26 | Note:- The contract sum shall be arrived at after deduction of amount of Sch of credit. Please Enable Macros to View BoQ information |
