|
| 1 | B/R PORTIONDemolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded, pointed in any mortar rubbish off the premises to low land area of outside MoD land complete all as directed. |
| 2 | Demolition of cement concrete (Unreinforced) in ground floors, pavings, sunken floor etc n.exc 15 cm thickness (below or above ground level) and rubbish off from the premises complete all as directed. |
| 3 | M&L for 40 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm grade stone aggregate) as in sub base complete all as specified and directed. |
| 4 | M&L for 8 to 10mm thick vitrified colour ceramic (light shade) tiles, area of each tiles n.exc 0.36 sqm in floors/skirting/dado etc., set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed. |
| 5 | M&L for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete all as specified. |
| 6 | M&L for non-skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding exc. 0.11 sqm but not exc. 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed. |
| 7 | M&L for non-skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding exc. 0.06 sqm but not exc. 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed. |
| 8 | M&L for providing 15 mm thick Screed bed or bedding layer of cement mortar (1:6) for laying floor finishes under floor tiles, complete all as specified and directed. |
| 9 | M&L for Rendering 10mm thick CM (1:4) on fair faces of brick work or concrete surfaces for tiles in vertical faces , complete all as specified and directed. |
| 10 | Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 11 | M&L for Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade complete all as specified and directed. |
| 12 | Labour only for Rounding to edges of stone slabs one edge/ full, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 13 | M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed. |
| 14 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm aggregate) Cement concrete as in sub base complete all as specified and as directed. |
| 15 | M&L for ISI marked 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of crushed stone sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and directed. |
| 16 | Supply only Aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 17 | S&F Aluminium Powder coated (Thickness or powder coating not less than 50 micron) window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.) complete all as specified and as directed. |
| 18 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/rubber beading in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 19 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/rubber beading in square not exc 0.5 sqm in each extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side, complete all as specified and as directed. |
| 20 | Excavation in post holes each n.exc 0.50 Cu.mtr & getting out in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 M & making good surfaces. |
| 21 | M&L for PCC (1:2:4) type B-2, in foundation filling and mass concrete etc. (using 40 mm graded stone aggregate) as in post holes complete all as specified and directed. |
| 22 | Dismantling of wrought iron or mild steel work as in post etc of any description not otherwise provided for complete all as specified and directed. |
| 23 | S&F for rolled mild steel sections conforming to grade E-250 (Fe-410W, quality B) as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee angle channel or flat sections) including distance pieces, nuts & bolts, etc. complete. |
| 24 | M&L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and directed. |
| 25 | M&L for preparation of newly steel or iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paints over a coat of red oxider primer complete all as specified and directed. |
| 26 | Dismantling of plain or corrugated, steel sheeting, any gauge, thickness in roof covering complete all as specified and directed. |
| 27 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap incl dismantling of existing sheets complete all as specified and as directed. |
| 28 | M&L for Filleting in any position and to any shape in cement lime mortar 1:1:6 including all mitres, stops, etc complete all as specified and directed. |
| 29 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along externalwall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 30 | M&L for providing post construction Anti Termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 31 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 32 | M&L for providing Plywood, grade BWR 12 mm thick, type BB, fixed with screws to timber frame work as in cupboard and shelf, cabinet etc. complete all as specified and directed. |
| 33 | M&L for providing Plywood, grade BWR 18 mm thick, type BB, fixed with screws to timber frame work as in cupboard and shelf, cabinet etc, complete all as specified and directed. |
| 34 | M&L for providing Decorative laminate type 1, with 0.9 mm thickness of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 35 | S&F for plain fillets of 2 nd class hard wood exc 3 but n.exc 6 Sqcm in section, square rectangular or triangular in section, clean swan secured with nails or brads, for plywood face for cupboard and cabinet works complete all as specified and directed. |
| 36 | S&F for plain fillets of 2 nd class hard wood exc 6 but n.exc 13 Sqcm in section, square rectangular or triangular in section, clean swan secured with nails or brads, for plywood face for cupboard and cabinet works complete all as specified and directed. |
| 37 | M & L for applying French polishing on surfaces of any description, width or girth including cleaning and preparation of surfaces including a coat of wood filler on Old unserviceable work with one or more coats complete all as specified and directed. |
| 38 | S&F in repair magnet window catches (Round/square) and connected plate to shutters and frame including letting in and fixed complete all as specified and directed. |
| 39 | S&F in repairs Mild steel butt hinges, medium weight, 75 mm complete all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm |
| 40 | S&F in repairs stainless steel Handle of 75 mm size (modular selected quality of design as approved) fixed with Self Tapping screws all as specifed and directed. |
| 41 | M & L for 15 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed. |
| 42 | All as per Ser. Item No. 41.00 above but for fixing only complete all as specified and directed. |
| 43 | M & L for 20 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed. |
| 44 | All as per Ser. Item No. 43.00 above but for fixing only complete all as specified and directed. |
| 45 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc. 10cm girth complete all as speicified and directed. |
| 46 | M & L for PVC (SWR) floor trap, dia of outlet 100/75mm, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 47 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 48 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed. |
| 49 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 50 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed. |
| 51 | S&F PVC (SWR)vent cowl of size 110mm bore complete all as specified and directed. |
| 52 | S&F PVC (SWR) bends any radius 75/ 100mm complete all as specified and directed. |
| 53 | S&F PVC (SWR) branch piece, single (single Y) 75/ 100mm, equal or unequal complete all as specified and directed. |
| 54 | S&F PVC (SWR) branch piece, single (single Y) 75/ 100mm, equal or unequal complete all as specified and directed. |
| 55 | S&F PVC (SWR) junction single, (Single T) 75/100mm, equal or unequal complete all as specified and directed. |
| 56 | S&F PVC (SWR) junction double, (Double T) 75/100mm, equal or unequal complete all as specified and directed. |
| 57 | S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding (excluding flushing cistern) including long arm 'P' trap (CI) 100 mm dia of length upto 700mm or as per site requirement etc. complete all as specified and directed. |
| 58 | S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy type 15 mm bore to be fixed with fastener including CI brackets complete all as specified and directed. |
| 59 | S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection with PTMT nuts and plastic water closet seat of white in colour, back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified. |
| 60 | S & F in repair PVC low level flushing system plastic valve with inlet ball valve and ball (of capacity 10 liters) incl 32mm PVC flush pipe complete all as specified and directed. |
| 61 | S&F PVC connection 15mm bore size with two nuts and washers of length 450/600 mm all as specified. |
| 62 | S&F in replacement angle stop cock 15 mm dia with wall flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. |
| 63 | S&F in repairs bib cock quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 64 | S&F in repairs bib cock long body quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. |
| 65 | S&F in repairs Two Way bib cock double handle with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. |
| 66 | Supply and fix in repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1 metre long SS flexible tube & wall hook, complete all as specified and as directed. |
| 67 | S&F in repair Toilet Paper holder of stainless steel with SS flap complete all as specified and directed. |
| 68 | S&F in repairs wall mixer brass \\"L\\" bend chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. |
| 69 | S&F in repair cast copper alloy CP overhead shower arm 325 mm long square shape with wall flange(for wall mounted showers) with ABS overhead shower rose square 150mm, complete all as specified and directed by Engr-in-charge. |
| 70 | S&F in repair brass Chromium plated soap dish cubix , fixed to wall with CP brass screws, all as specified and directed. |
| 71 | S&F in repair Brass Chromium plated towel rail round, complete all as specified and directed. |
| 72 | S&F in repair Brass Chromium plated towel ring cubix, complete all as specified and directed. |
| 73 | Supply and fix in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed. |
| 74 | S&F in repair for glass shelf 500mm x 125 mm x 8mm thick with chromium plated railing fixed with and including chromium plated brackets, complete aii as specified and as directed. |
| 75 | S&F in reapir Cabinet mirror plastic body for toilet of size 400x500mm with 4mm thick looking mirror complete all as specified and directed. |
| 76 | S&F in repairs, looking mirror 4mm thick selected quality glass of approved size 600x 450mm bevelled edge mounted on PVC sheet backing with PVC colour frame of approved colour complete all as specified and directed. |
| 77 | S&F in replacement stainless steel plate rack made up of sheet grade SS-304 of size 609mm X 914mm X 254 mm, thickness not less than 0.63mm complete all as specified and directed. |
| 78 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm x 203mm, bowl size 405mm x 354mm x 203mm complete all as specified and directed. |
| 79 | S&F sinks without drainboard made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 405mm x 460mm x 203mm, bowl size 405mm x 354mm x 203mm complete all as specified and directed. |
| 80 | Taking down chowkats or frames not exc. 1.5 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed. |
| 81 | Taking down chowkats or frames exc. 1.5 sqm but not exc 4.0 Sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed. |
| 82 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed. |
| 83 | Taking down shutters of any description exc 2 sqm each complete all as specified and directed. |
| 84 | S&F Factory made 100% solid wood plastic composite (WPC) double rivet, door frame size 125 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum, complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 85 | S&F Factory made 100% solid wood plastic composite (WPC) single rivet, door frame size 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 86 | S&F for 2nd class hardwood, 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, with moulded bead is provided and planted round the panels (for each side) complete all as specified and directed. |
| 87 | S&F for 35 mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm lipping patti for all around the shutters complete all as specified and as directed all as specified,complete all as specified and directed. |
| 88 | S&F for Glazed and skeleton shutters, in second class hard wood 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed. |
| 89 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with stainless wire staples fixed on wood frame complete all as specified & directed.(Note : All Screws shall be self tapping chrome plated) |
| 90 | S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded any approved colour, PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 176 of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.(Note : All screws shall be self tapping chrome plated with minimum length not less than 38mm) |
| 91 | S&F Butt hinges, 100 mm long extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 medium weight complete all as specified and directed.(Note : All screws shall be self tapping chrome plated with minimum length not less than 38mm) |
| 92 | S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm complete all as specified and directed. |
| 93 | S&F Aluminium anodised, 375 mm long skeleton tower bolts with plate, staples and bolt of extruded section and fixed with self tapping screws complete all as specified and directed. |
| 94 | S&F Extruded aluminium alloy handles 150mm long, (selected quality as approved) fabricated type, anodised and fixed with self tapping screws complete all as specified and directed. |
| 95 | S&F in repair floor door stopper of stainless steel type polished and tongue 135/140 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified. |
| 96 | M&L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 97 | M&L for fixing of snake guard/door seal made aluminum colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified. |
| 98 | S & F in repairs 300mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required complete all as specified and directed. |
| 99 | S&F in repairs stainless steel peg set of six pegs, fixed/welded/soldered on stainless steel base plate of size 300mmx30mmx2.5 mm and fixed with stainless steel screws, rowel plugs as per the sample approved by the Engineer-in-charge complete all as specified and directed. |
| 100 | Supply and fix repairs decorative type curtain rod, stainless steel, 25 mm dia with not less than 1mm wall thickness complete all as specified and directed. |
| 101 | Supply and fix decorative type brackets , stainless steel U type hook, suitable for above curtain rod complete all as specified and directed. |
| 102 | S &F pull it dry clothes pulley system of 6 feet long complete all as specified and as directed.(Make :- Easy dry system private ltd or of Techno commercially equivalent make as approved by GE) |
| 103 | Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scraping out Old unserviceable treatment/bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned all of foreign material and dust to recieve new water proofing treatment and removal of rubbish off the premises to outside ministry of defence land complete all as specified and as directed |
| 104 | M&L for 15mm thick rendering in CM (1:4) in order to maintain proper slope over existing roof surfaces for laying of APP based polymeric membrance finished even and smooth without using extra cement complete all as specified and directed.(Note : Polymeric membrance and WPC shall be measured and paid seperately) Please Enable Macros to View BoQ information |
| 105 | M&L for 15mm thick rendering in CM (1:4) in order to maintain proper slope over existing roof surfaces for laying of APP based polymeric membrance finished even and smooth without using extra cement complete all as specified and directed.(Note : Polymeric membrance and WPC shall be measured and paid seperately) Please Enable Macros to View BoQ information |
