|
| 1 | Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 2 | Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 3 | Taking down shutter of any description not exceeding 1 Sqm each complete all as specified and as directed. |
| 4 | Taking down shutters exe 1 sqm but n exc 2 Sqm each complete all as specified. |
| 5 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions frames (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws. all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 6 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows(two or three track sliding/openable) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 7 | S&F for Powder Coated aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including U sections, fixed to aluminium door/windows/ventilators complete all as specified and directed. |
| 8 | Material and labour in repair aluminium composite panel sheet of 4mm thick which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 u PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber basket complete all as specified and directed.Make :- Alstone/Alex panel/Armstrong/Euroboard |
| 9 | Supply and fix 5mm thick float glass, tinted/smoked/Eached shape fixed to frame/shutter for Aluminium door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed. |
| 10 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 11 | Supply and fix for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 12 | Supply and fixing Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 13 | Supply and fixing brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed. |
| 14 | S&F for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and directed. |
| 15 | M&L for providing cement concrete type C-0 (1:3:6) (using 12.5mm graded crushed stone aggregate) as in pressed steel door frames (backfil) complete all as specified and directed. |
| 16 | M&L for providing cement concrete type C-1 (1:3:6) (using 20mm graded crushed stone aggregate) as in hold fasts, complete all as specifed and as directed. |
| 17 | M&L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 18 | M&L for preperation of new wooden surfaces or old of any description and appying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified. |
| 19 | S&F for 35mm thick 2nd class hard wood factory made plain, framed paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venerred particle board with commercial veneering on both side faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specifed and directed.. |
| 20 | S & F for 30mm thick flush shutters, solid core construction, with block core plywood face panels, commercial type on both sides, chemically treated against termite infestation complete all as specified and directed. |
| 21 | S & F for 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 22 | Supply and fix, butt hinges, 100mm long, mild steel with galvanised mild steel hinge pin, complete all as specified and directed. |
| 23 | Supply and fix, butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, complete all as specified and directed. |
| 24 | Supply and fix 180mm size powder coated (any tint) aluminium \\"American Handle\\" fixed to aluminium door with suitable screws, complete all as specified and directed. |
| 25 | Supply and Fix, Aluminium anodised, barrel tower bolts 200mm long, powder coated, of extruded section and fixed, complete all as specified and directed. |
| 26 | Supply and fix, Aluminium alloy, anodised, Sliding door bolts 200mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed. |
| 27 | Supply and fix 140mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 28 | S&F Aluminium handles, cast type, anodised 100mm in size fixed with screws complete all as specified and directed. |
| 29 | M&L for fixing false ceiling 12 mm thick at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns BIS product Confirming to IS 2095 Part 3:2022, having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476 (part 4)-1970 and light reflectance of 90% (minimum) to be laid and including in true horizontal level suspended on inter-locking metal Powder Coated T-Grid of hot dipped galvanized iron section of 0.33mm thick on Silhouette Profile, rotary stitched single webbed white with 6mm reveal profile (Black), comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners/(Screw holding in same size for trusses, rafter and purlins etc), 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 20x20x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. including taking down existing ceiling. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Make: Diamond brand TM/Dexune/Everest/Arm strong ceiling. Note : MTC to be provided by contractor. |
| 30 | Supply and Fixing for PVC Wall Lining any colour , texture consisting of 5mm thick single side prelam PVC sheet used instead of plain including PVC sheet fillet (U,C or L shape) by mean of solvent/nails/screws to make grid as per manufacturer instruction fixing on wall and including of taking down old PVC wall Panneling all as specified and directed. Note :- Make Approved by GE. |
| 31 | Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 32 | Supply and fix, plain sheet glass 4mm thick, ordinary quality, not exceeding 0.50Sqm in each pane fixed to aluminium door/window and iron frame including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed. |
| 33 | Supply and fix plain sheet glass 3mm thick, ordinary quality, not exceeding 0.50Sqm in each pane, and glazing with oil putty and securing pins, spring clips etc, complete all as specified and directed. |
| 34 | Supply and fix in repair 140mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 35 | Supply and fix in repair Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 36 | Supply and fix in repair 180mm size powder coated (any tint) aluminium \\"American Handle\\" fixed to aluminium door with suitable screws, complete all as specified and directed. |
| 37 | Supply and fix in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 38 | Supply and fix in repair Aluminium alloy, anodised, sliding door bolts 200mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed. |
| 39 | Supply and Fix in repair, powder coated door seal fixed with screws to any type of shutter, complete all as specified and directed. |
| 40 | Supply and fix in repair brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed. |
| 41 | Material and labour for repairing any type of aluminium/wooden door shutter area exc 1 sqm but n. exc 2 sqm and refixing in the same opening after resecuring its frame work by means of tightening with necessary arrangement and new screws of by aluminium angle cleat , complete all as specified and directed. |
| 42 | Material and labour for repairing any type of aluminium/wooden window shutter area exc 1 sqm but n. exc 2 sqm and refixing in the same opening after resecuring its frame work by means of tightening with with necessary arrangement and new screws of by aluminium angle cleat , and roller for sliding window complete all as specified and directed. |
| 43 | Taking down mild steel rolling shutters/collapsible steel gate of any size and description complete all as specified and as directed. |
| 44 | S&F 1.25mm thick steel rolling shutters without ball bearing as specified of push pull or manual type as specified, including top cover, anchoring rod, hasp & staple and one coat of primer and two coats of synthetic enamel paint; erected in position as indicated complete all as specified and as directed. |
| 45 | Overhauling, servicing and realignment of rolling shutters of area not exc 12 sqm any type Gear operative or without gear including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as specified and as directed. (Note : - (i) Necessary arrangement of crane/moving ladder shall be made by the contractor with out any extra cost.) |
| 46 | Overhauling, servicing and realignment of rolling shutters of area exc 12 sqm any type Gear operative or without gear but not exceeding 25 sqm including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as specified and as directed.Note : - (i) Necessary arrangement of crane/moving ladder shall be made by the contractor with out any extra cost |
| 47 | S & F factory made box type steel window composite type with double rebate pressed steel frame 80mmx60mm (peripheral) and 80mmx75mm (intermediate members) including grill using 10 mm square bar, made out of cold rolled 1.25mm thick sheet having steel window/ventilators double shutter of MS tubular section of size 50mm x 20mm x 1.1mm thick fixed with box type hinges including 12mmx3mm MS flat as beading for glazed and wire shutter handle of 100mm MS hollow tubular section as beading for wire and putty for glazing shutter handle of 100mm size made out of Z section 01 no, MS stove enamelled black tower bolt of size 120mm 02 nos, 150mm mild steel hooks and eyes, each shutter flat iron 40mmx1.25mm and 200mm long hold fast 04 nos each window including taking down existing window any description and any position any description and any position and making good of surface area of cill,soffit , jamb and necessary filling for frame and hold fast with PCC (1:3:6) type C1 complete all as specified and directed. |
| 48 | M&L mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 49 | S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 50 | Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors etc |
| 51 | M&L for Machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over and including 20 mm thick Screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes etc complete all as specified and as directed. |
| 52 | M&L Machine cut kota stone slab flooring in patches 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over and including 20 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes etc complete all as specified and as directed. |
| 53 | M&L 18 to 20 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified. |
| 54 | M&L for Mirror polishing on horizontal or vertical portion of marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish incl refixing of marble/ granite/ Kota stone slab or pieces if required complete all as specified. |
| 55 | Demolition of brick work built in cement mortar in any position and in any location complete all as specified and directed. |
| 56 | M&L for Brick work with sub Class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 in any location, complete all as specified and as directed. |
| 57 | M&L for Brickwork bricks straight or curved on plan to any radius in half brick thick wall, built in Cement Mortar 1:4 complete all as specified and directed. |
| 58 | M&L Rendering 15mm thick in cement mortar 1:4 with water proofing compound on brick/concrete surfaces finished fair and even without using extra cement complete all as specifed and as directed etc. (Note : Water proofing compound shall be measured & paid seperately). |
| 59 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer etc complete all as specified and directed. |
| 60 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 61 | Dismantling of post or struts ( wood ,steel, RCC) any section including taking out embedded portion and making good disturbed surface.complete all as specified and directed by Engr-in-Charge. |
| 62 | S & F for steel roof truss , Framed, trussed, purlins, crane gantries, rails and fastings and heavey bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe- 410-W Gde E- 250 complete all as specified and directed by Engr-in-Charge. |
| 63 | Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed. |
| 64 | Dismantling of asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings etc complete all as specified and directed. |
| 65 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fix with self tapping screws as specified. |
| 66 | S&F for Galvanised, corrugated mild steel sheeting 0.63mm thickness with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. |
| 67 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification complete all as specified and directed. |
| 68 | S&F Factory made Solid PVC moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core , supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.. |
| 69 | Supply and Fix, Aluminium anodised, barrel tower bolts 150 mm long, powder coated, of extruded section and fixed, complete all as specified and directed. |
| 70 | M&L for clean sawn second class hardwood in frame work complete all as specified and directed by Engineer-in-Charge. |
| 71 | Dismantling timber fillets,posts,railing rafter, purlin,balusters, handrails and treads under 40 sqcm framed work in sectional area,complete all as specified and as directed. |
| 72 | M&L 2nd class hardwood Plain fillets (exc13 Sqcm n.exc 25 sqcm) square, rectangular or triangular in section, clean sawn, secured with nails or brads in repair complete all as specified and as directed. |
| 73 | S&Fin repair Pre-laminated particle board 18/19mm thick, interior grade, pre laminated one side decorative choice lamination and side balancing white,fixed in frame, complete all as specified and as directed.Note :- Colour of Particle board Approved by GE |
| 74 | S&F in repair 12 mm thick with dark/light sunmica/Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame workNote:- Colour of veneer face Approved by GE |
| 75 | S & F in repair 40mm width continuous (Piano) hinges Stainless Steel, bright finishComplete all as specified and directed. |
| 76 | S & F in repair 75mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screwsetc complete all as specified and directed. |
| 77 | S & F in repair Brass knobs 35-40mm dia complete all as specified and directed. |
| 78 | M&L for teak wood Lipping 2 to 3mm thick fixed to 18/19mm board with nails complete all as specified and directed. |
| 79 | Material & Labour for buffing, polishing of stainless steel railing,verical posts(any size) made of hollow tubes, channels, plates etc., including welding, grinding,if required making good and fitting the same with necessary stainless steel nuts and bolts complete, on the top of floor or the side of waist slab with suitable arrangement. |
| 80 | Material & Labour for buffing, polishing of stainless steel computerized designed alphabets /writing letter/figures in (Block, Roman, Italic style or in Indian languages)/ holograms etc crafted from stainless steel (any size) including making good and refixed (if required) the same with adhesive or nuts and bolts at any height complete all as specified. |
| 81 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with belding or necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 82 | M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed. |
| 83 | S & F for in repair stainless steel curtain rod chromium plated with fixing brackets(i.e roller ,lattu) ,stops etc complete all as specified and directed. |
| 84 | Taking down Aluminium chowkhats or frames with shutters without taking off shutters from frame exe 1.5 sqm and n.exc 4 sqm each complete all as specified. |
| 85 | Taking down Aluminium Window chowkhats or frame with shutters n. exe 1.5 sqm complete all as specified. |
| 86 | M&L for plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed. |
| 87 | S&F factory made (cabinet work) of 18 mm thick HDMR board with 1 mm thick decorative laminate (sunmica) on outer face and balancing laminate on inner face, including 2 mm PVC edge banding, including dismantling old existing board complete all as specified & directed . Make : Century ply/Green panel/ActionTesa/RAJSHRI/ ECOCELL Note:- coloured approved by GE |
| 88 | S&F for Stainless steel soft close hinges for cabine/wordrobe leaf complete all as specified and as directed. |
| 89 | S & F for stainless steel wardrobe lock of approved make (such as Godrej / Ebco / Hettich / Dorset or equivalent), made of SS 304 grade, suitable for wooden/WPC wardrobe shutters, complete with:Lock body with cylinder mechanism 2 or 3 keys (nickel plated) SS strike plate Necessary screws, fittings & accessories Fixing on shutter including cutting/slotting if required The lock shall be corrosion-resistant, smooth in operation, and of approved design and finish.Complete as directed by Engineer-in-Charge. |
| 90 | M&L for 75 mm long premium cabinet handles made of Stainless Steel Grade 304 (SS 304), heavy-duty quality, minimum 1.2–1.5 mm thickness, of approved make and design (sleek / designer / tubular / profile type), with satin / brushed / matte / PVD finish, including:Supplying handles complete with high-quality SS screws, washers, and concealed fittingsAnti-rust and corrosion-resistant material suitable for kitchen and wardrobe useFixing on shutters/drawers of cabinets, wardrobes, modular kitchens, etc.Accurate drilling, alignment, firm fixing, and finishing without surface damageAll labour, tools & tackles, scaffolding (if required), and complete installation. |
| 91 | M&L for Block boards, 18/19 mm thick grade 2 quality, i n t e r i o r grade, with decorative face veneer/sunmica on both face, Complete as directed by Engineer-in-Charge. |
| 92 | S&F exterior grade aluminium composite panel sheet wood finish/marble in dark colour or metalic finish/glossy in dark colour of 4 mm thick fixed in grid/ceiling/wall /chajja,facia,cill,jamb,soffit or any type of parabolic shape/frame work of steel fixed on wall ,celiing,facia,chajja etc . composite sections/ panels with stainless steel rivets to approved size including necessary aluminium Grid/ framing, drilling etc,of sizes,shape and spacing as per manufacturers instructions complete including filling up joints with silicon sealant etc. lengths of sheets as customized at site of work and of shades .incl necessary scaffolding up to15m height as required complete all as specified. (Colour approved by GE) |
| 93 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Complete all as specified as per Manufacturer broucher. MAKE : RAJSHREE, SINTAX, ECOCELL OR EQUIVALENT. |
| 94 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. MAKE : RAJSHREE, SINTAX, ECOCELL OR EQUIVALENT. |
| 95 | Taking down chowkhat or frame exc. 4.00 sqm but n.exc 10.00 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 96 | Providing, supplying, installation, testing and commissioning of automatic double sensor-operated sliding glass door(Size: 2.1mX2.40m) system, comprising 12 mm thick toughened etched glass panels, complete with all fittings, fixtures, automation system, electrical works, and accessories, as per specifications and as directed by Engineer-in-Charge.The item includes:A. Glass Work12 mm thick toughened safety glass conforming to relevant IS standards,Acid etched / sandblasted design as per approved pattern by GE,Machine polished edges with rounded cornersB. Door Automation SystemAutomatic sliding mechanism with brushless DC motor,Microprocessor-based controller,Adjustable opening/closing speed' Soft start/stop and auto-reverse safety system,Infrared/motion sensor operationC. Sensors & SafetyMotion detection sensor (adjustable range),Safety sensor to prevent collision,Emergency/manual override systemD. Track & Frame SystemHeavy-duty aluminium track with anodized/powder-coated finish,Aluminium casing for motor housing,High-quality rollers and guidesE. Hardware & FittingsSS 304 grade fittings including patch fittings, brackets, connectors,Floor guides, stoppers, rubber gaskets, brush seals,All fixing accessories complete |
| 97 | F. Electrical WorkComplete internal wiring with FRLS copper wire,Concealed conduit system,MCB protection and earthing,Integration with existing power supplyG. Installation, Testing & CommissioningComplete erection and installation,Alignment, sealing with siliconeTesting of sensors, motor, safety systems,Trial runs and commissioningApproved Makes:1).Toughened Glass-Saint-Gobain / AIS (Asahi India Glass) / Modi Guard.(2).Automatic Door System (Motor & Controller)-Dorma / Hafele / Ozone / Geze.(3) Sensors (Motion & Safety)-Hikvision / Honeywell / Ozone / Dorma.(4).SS Hardware & Fittings (SS 304)-Jindal/Hafele / Ozone / Dorma.(5).Aluminium Sections / Tracks-Jindal Aluminium / Hindalco / Banco.(6).Access Control System (RFID/Card)-Hikvision / Matrix / eSSL / Honeywell.(7).UPS System-APC / Microtek / Luminous(8).Sealant / Adhesive- Dr. Fixit / Pidilite/Asian.(9).Electrical Wires (FRLS)-Polycab / Finolex / Havells.(10).MCB / Electrical Accessories- Achor/Legrand / Havells/ Gold medal.Notes:- Rate shall include all materials, labour, T&P, transport, taxesNothing extra shall be paid for cutting, wastage, fittings, or installationContractor must submit catalogues and shop drawings before execution, and test certificate after execution.Warranty: Minimum 12 months |
| 98 | Note:- Amount of credit of Rs. 41640.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
