|
| 1 | M & L for Brick work with sub class 'B' bricks, straight or curved on plan on exceeding 6m mean radius, using old size brick, built in cement mortar 1:6, incl demolition of brick work or stone /boulder masonry complete all as specified and directed. |
| 2 | All as per item No 2 here-in-before but except bricks, incl demolition of brick work or stone /boulder masonry complete all as specified and directed. Note : Old bricks obtained against demolition shall be used. |
| 3 | M & L for Walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted, built in cement mortar 1:6 incl demolition of brick work or stone /boulder masonrycomplete all as specified and directed. |
| 4 | All as per serial item No. 03 above here-in-before but except stone incl demolition of brick work or stone /boulder masonry complete all as specified and directed. (Note : Old stone obtained against dismantling/demolition shall be used) |
| 5 | M&L for providing precast cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate as in for bond stones(of any section indicated), bonders (for stone walling) window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks corbels, brackets, etc with plain fair faces, including chamfers, weatherings, throat- ing etc and setting in mortar complete with joints to match complete all as specified and directed. |
| 6 | M&L for Raised pointing to random or polygoned rubble walling, uncoursed, or brought upto courses in cement mortar 1:4, complete all as specified and directed. |
| 7 | S&F only 110mm dia PVC (SWR) pipes, single socketed in any length as in weep holes, complete all as specified and as directed |
| 8 | M & L PCC Type B-1 1:2:4 (using 20 mm graded crushed stone aggregates) as in coping, cills, steps, in lintels upto 1.5m clear span and similar other works like bands, plinth courses, lacing courses, bed plates, water troughs and the like incl weathering, slightly rounded or chamfered angles and throating, incl necessary form work, complete all as specified and directed. |
| 9 | M&L PCC type D-2 1:4:8 (40mm graded aggregate) as in foundation and mass concrete complete all as specified & directed. |
| 10 | S&F Mild steel framed work such as grills, gates and gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe -290, Gde E-165 including dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 11 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including demolition of existing tiles and removal outside the MoD land, design/colour/shade to be approved by GE, complete all as specified and directed. |
| 12 | Dismantling and refixing Machine pressed precast concrete interlocking paver block any shape and size complete all as specified and directed. |
| 13 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in cement mortar 1:6, design/pattern /colour/shade to be approved by GE including demolition complete all as specified and directed. |
| 14 | M&L Coloured parking tiles of size 400mm x 400mm x 12mm laid in floor or wall over 15mm screed bed in CM 1:4 with grey cement and pigment, design/colour/shade to be approved by GE, including demolition complete all as specified and directed |
| 15 | Demolition of cement concrete (unreinforced) of any description any position (below or above ground level), complete all as specified and directed. |
| 16 | M&L for 75 mm thick Cement concrete in sub base type D2 1:4:8 (40mm graded stone aggregates) complete all as specified and directed. |
| 17 | M&L plain cement concrete, Type C-2 1:3:6 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc, complete all as specified and directed. |
| 18 | M&L plain cement concrete, type C-2 1:3:6 (using 40 mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed. |
| 19 | Taking down cement plaster of any description on brick or stone or cement concrete block walls etc(but not backing) including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises complete all as specified and directed. |
| 20 | M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing for fair & even finished complete all as specified and directed. |
| 21 | M&L for preparation of new plastered surface of wall including and applying two coats of cement base paint upto 15 m height, complete all as specified and directed. |
| 22 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground or lean concrete etc and making good disturbed portion, complete all as specified and directed |
| 23 | Dismantling fencing wire mesh, any type complete all as specified & directed. |
| 24 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50 m in any type of soil and making good surface complete all as specified and directed |
| 25 | M & L for Rolled mild steel work as in posts & struts in fencing, using angle, iron or other section, including cutting tops to shape as directed, drilled holes, notching for wire etc, flat iron fillets (for securing wire mesh) including all necessary drilling, bolting and riveting etc and similar work confirming to Fe -290 Gde E-165, complete all as specified and directed Note : Unit rate is also included locking holes after fixing of barbed wire and welding to bent portion complete all as specified and directed. |
| 26 | Supply only Mild steel galvanized, chain link fencing size or any type wt 3 to 5 kg per Sqm complete all as specified and directed. |
| 27 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, starting bolts, etc. including provision of binding wires complete all as specified and directed. |
| 28 | Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other ends, or screwed both ends each screw to be fitted with washer and one hexagonal or square nuts, length of bolt not exceeding 25 mm long, diameter of shank 12mm, complete all as specified and directed. |
| 29 | M & L for Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide zinc chrome primer, complete all as specified and directed |
| 30 | M & L for applying one coats of synthetic enamel paint, over old steel surfaces of any description not otherwise described, over 10cm width or girth, complete all as specified and directed. |
| 31 | M&L for Restraining and resecuring including making good staples and typing with mild steel binding wire (when ever required ) etc in existing barbed wire fencing of any description complete all as specified and directed. |
| 32 | S & F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 33 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed. |
| 34 | M&L TMT bar 6 to 8mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for column, hooking end and binding with and incl mild steel wire (annealed) not less than 0.9mm dia,complete all as specified and directed. |
| 35 | M&L for demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition),complete all as specified and directed. |
| 36 | M&L for providing precast cement concrete Type B1 (1:2:4) using 20mm graded crushed stone aggregate in landings, cover slabs chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in CM 1:4 incl necessary formwork complete all as specified and directed |
| 37 | M&L for Cleaning and removing all scale, dirt etc from tanks and from mouths of circulating pipes exc 250 & n exc 500 litres capacity, incl scrubbing whole internal surface with suitable brushes, cleaning with detergent solution, washing with clean water, disposing obtained sludge from outside premises incl marking date of tank cleaning with paint complete all as specified and directed. |
| 38 | M&L for Cleaning and removing all scale, dirt etc from tanks and from mouths of circulating pipes exc 500 & n exc 1000 litres capacity, incl scrubbing whole internal surface with suitable brushes, cleaning with detergent solution, washing with clean water, disposing obtained sludge from outside premises incl marking date of tank cleaning with paint complete all as specified and directed. |
| 39 | S&F GI steel water tubing medium grade 20mm bore as in any lengths with all fittings incl taking up or down steel tubing of any bore including cleaning for re-fixing or removing to store complete to walls or floor acomplete all as specified and directed. |
| 40 | M & L for repair of distrubed/ broken brick/stone/roof holes in walls/roof with CM 1:6 including filling of narrow interstices with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) after and including removal / root out of trees, plants, trunks, grasses and creeps etc from roof or wall , finished with 15 mm plaster in CM(1:6) including finishes the surface with same finish complete all as specified and directed. |
| 41 | S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position incl tank nipple with washers and all required accessories complete all as specified and directed. |
| 42 | S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position incl tank nipple with washers and all required accessories complete all as specified and directed. |
| 43 | S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm-210 gms/ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 44 | S&F 20m dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed. |
| 45 | M&L for Hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 46 | M&L 75 mm Thick PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed. |
| 47 | M&L 50 mm Thick PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate as in floor & paving etc casted in panels incl all necessary formwork & surface finished even & fair complete all as specified and as directed. Please Enable Macros to View BoQ information |
