|
| 1 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed |
| 2 | Taking down carefully unserviceable main switches/DB's/Metal socket off size including MCBs from their position and removing materials from site complete all as specified and directed |
| 3 | S&F galvanised iron pipes 4 mm dia,. light grade, with all fitting and fixed complete to poles/route/drains etc and ceillings or laid in floors complete all as specified and directed |
| 4 | S&F Double Wall Corrugated HDPE Pipe IS-16205, outer dia 40 mm for cable protection in wall/under gorund laying of UG cables including SNAP-FIT Coupler and all fittings as required at site complete all as specified and as directed |
| 5 | M&L for point wiring for the following with stranded FRLSH copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sqmm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULAR METAL FLUSH BOX , modular white cover plate any size with support frame any size module cover of approved make including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed:- |
| 6 | One light point controlled by one, one way switch 5 Amp |
| 7 | One light point controlled socket point on the same board with other switches |
| 8 | One socket point on indpendent board |
| 9 | One bell point controlled by one, one way switch 5 Amp |
| 10 | All as per Srl item No. 5.00 above but one 3 pin socket outlet 15 Amps independent with cable 4 Sqmm size |
| 11 | S&F switch Modular type single pole 6 Amps One Way Switch AC 230V, 50HZ supply complete all as specified and as directed. Make : Cat Part No. 800100 of Indoasian ELVIRA / Cat Part No. ACWSXXW101 of Havells CRABTREE(Signia) |
| 12 | S&F switch Modular type single pole 16 Amps One Way Switch with indicator AC 230V, 50HZ supply complete all as specified and as directed. Make : Cat Part No.800105 of Indoaisian ELVIRA/ Cat Part No. ACWSXIW161 of Havells CRABTREE(Signia) |
| 13 | S&F Modular type socket 6 A AC 230V, 50HZ complete all as specified and as directed.Make : Cat Part No. 802800 of Indoaisian ELVIRA/ Cat Part No. ACWKPXW063 of Havells CRABTREE(Signia) |
| 14 | S&F Modular type switch socket combine 6A/16A multi purpose AC 230CV, 50HzMake : Cat Part No. 800122 of Indoaisian ELVIRA / Cat Part No. ACWKCXW163 of Havells CRABTREE(Signia) |
| 15 | S&F ceiling rose surface backelite three terminal 240 volts complete all as specified |
| 16 | S&F Modular Fan step regulator, 120W - 2 module complete all as specified and as directed.Make : Cat Part No. 800139 of Indoaisian ELVIRA/ Cat Part No. ACWRFHW008 of Havells CRABTREE(Signia) make |
| 17 | S&F LED lights fitting 1x 20W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed.Make: Cat Part No: LUMILINE+BS20WLED830SPCSSIND of Havells or equivalent make in Bajaj/Philips/Wipro/Crompton |
| 18 | S&F LED lights fitting 1x 10W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5 Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed.Make: Cat Part No: LUMILINE+BS10WLED865SPCSS of Havells or equivalent make in Bajaj/Philips/Wipro/Crompton |
| 19 | S&F ENDURA SUN DOWN energy saving and environmental friendly long life LED street light made of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP66 protection and impact resistance of IK08 LED street light of 35 Watt with sutable size bracket made to shape of 40 mm dia GI pipe medium grade of 1.4 mtr length including MS clamps 25 x 4 mm - 02 Nos with nut bolts washers complete all as specified and directed.Make:- Havells Cat Part No - ENDURASUNDOWNSL35WLED765PASYBOPC e or equivalent make in Bajaj/Philips/Wipro |
| 20 | M&L for submain wiring using single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 6 runs of 10 Sqmm of voltage rating 1100V for three phase & neutral, drawn in and including PVC concealed conduit of not less than 32 mm dia with standard acessories, along with two run of FRLS PVC insulated, unsheathed, stranded copper conductor of size 10 Sqmm as earth continuity conductor all as specified and directedNote:- 6 runs of single core FRLS PVC cable 10 Sqmm for three phase & neutral with two run of earth conductor shall be measured as one unit |
| 21 | S&F in replacement sub main wiring in and including PVC concealed conduit of not less than 25 mm dia with 2 single core 06 sqmm FRLS multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 06 sqmm copper conductor cable connected to common earth dolly complete and including PVC concealed conduit all as specified and as directed Note:-Two run of runs of single core FRLS PVC cable 6 sqmm and one run of 6 sqmm earth conductor shall be measured as one unit |
| 22 | S&F sheet metal enclosure double door factory made distribution board 240 volts SPN 8 way, 200 Amps rated bus bar complete all as specified and as directed. |
| 23 | S&F sheet metal enclosure double door factory made distribution board 240 volts SPN 12 way, 200 Amps rated bus bar complete all as specified and as directed. |
| 24 | S&F sheet metal enclosure double door factory made distribution board 415 volts TPN 4 way, 200 Amps rated bus bar complete all as specified and as directed. |
| 25 | S&F sheet metal enclosure double door factory made distribution board 415 voltsVTPN 8 way, 250 Amps rated bus bar complete all as specified and as directed. |
| 26 | S&F MCB SPN 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed. |
| 27 | S&F MCB SP 06 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed. |
| 28 | S&F MCB TPN / FP 63 Amps, C Curve, 415 volts, 50 Hz AC supply complete all as specified and directed. |
| 29 | S&F MCCB 3 Pole 125 Amps, 16 KA, 415 volts, 50 Hz AC supply complete all as specified and directed. |
| 30 | M&L for taking down ceilng fans, dismantling blades, painting of ceiling fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and refixing ceiling fan and connecting up including provision of 0.5 Sqmm 3 core cable from ceiling rose to connector of fan complete all as specified and directed |
| 31 | S&F exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers including cutting the wall as round shape for exhasut the air complete all as specified and directed |
| 32 | M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre depth below normal ground level) with top edge of plate at a depth not less than 1.5 mtr below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to galvanized earth wire 04 mm dia with and including bolts, nuts, check nuts and washers of galvanised iron or steel and riveted to earth plate and one end and connecting to main switch board or metallic bodies of HT/LT equipments etc at the other end, GI wire encased in and including 15 mm bore GI light grade pipe with all fittings, from top of electrode to body of equipment fixed with and including flatiron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI light grade and including funnel, wire mesh, copper lugs etc from bottom of earth pit to top of electrode complete with earth pit in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate and CI cover complete all specified and shown in electrical plate No 03 of SSR Pt-I connecting earth electrode to test point with and including earthing lead including neessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50m, material and labour complete all as specified and as directed by Engineer-in-Charge. Note:- 1. The rate quoted shall be deemed to include for all the above provisions. 2. PCC chamber shall be constructed at least 1.5 m away from the earth electrode and pipe for watering shall be provided in slanting maner. |
| 33 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed |
| 34 | S&F in replacement Bell Ding dong AC single pole 230 Volts complete all as specified and directed |
| 35 | S&F in replacement Modular Bell push 6A 1 module type single pole 5 Amps complete all as specified and directed |
| 36 | S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 10 Amp complete all as specified and directed Please Enable Macros to View BoQ information |
