|
| 1 | Excavation in foundation in ordinary soil, loame, clay or sand including lift upto 1.5 m & Iead upto 30m Including filling watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or in to the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches.SOR (251). |
| 2 | Earth work in cutting or in embankment in ordinary soil, excavation to be in the regular pits not exceeding 0.5m in depth and earthwork in embankment to be in 20cm. layers, including ramming and dessing the surface to required levels & slopes & also including 1.5 lift & 30m. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m. Distance as directed by the engineer incharge . (Carted Earth 3.00 Km.) SOR 2 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per DSR 2023 SI no. 4.1.8 |
| 4 | Brick work with common burnt clay (non modular) bricks of class -150 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) as per DSR 2023. SI No- 6.1.2 |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). as per DSR 2023 SI No-5.3 |
| 6 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in Thermo-Mechanically Treated bars of grade Fe-500D or more. as per DSR 2023 SI. No.- 5.22 B.1 |
| 7 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. from the site of work & including watering,dressing etc. Rate includes cost of all materials, labour and T&P etc. required for proper completion of the work. SOR Chp. 4 Sl. No. 255 |
| 8 | Brick work with common burnt clay bricks of M-150 Class in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand ) as per DSR 2023 SI no 6.4.2 |
| 9 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. M.S. Angle 35x35x5 for door frames as per DSR 2023 SI no. 10.31 |
| 10 | Supply and fixing of flush Doors commercial quality conforming to I.S. 2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. SOR 470. |
| 11 | 15 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) Inner Side as per DSR 2023 IS 13.5.2 |
| 12 | 12 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) Outer Side as per DSR 2023 IS 13.4.2 |
| 13 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ) finished with floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40 mm thick floor 20 mm nominal size stone aggregate. as per DSR 2023 SI No. 11.3.1 |
| 14 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. as per DSR 2023 SI no. 11.37 A |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per DSR 2023. 8.31. |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm as per DSR 2023 SI no 11.41.2 |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per DSR 2023 Sl no. -13.62.1 |
| 18 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre as per DSR 2023 Sl no. -13.41.1 Two Coats |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per DSR 2023 Sl no. -13.46.1 Two Coats |
| 20 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR 2023 Sl no. -13.80 |
| 21 | Centering and shuttering including stutting, propping etc. and removal of form. as per DSR 2023 SI- 5.9.1 |
| 22 | Chequered preacast cement concrete tile 22 mm thick in footpath and court yard (pwd 11.20.1) |
| 23 | Cement concrete with 4 cm. (1½\\") gauge approved stone, ballast, approved coarse sand and cement in the proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. SOR 279. |
| 24 | 2 CM 3/4\\" thick damp proof coarse with cement and. approved coarse sand 1:2 and including water proofing materials as ordered by the Engineer-in-Icharge in the proportion as specified by the manufactuers including supply of all materials, labour and T&P etc. required for proper completion of the work and including proper curing and shuttering as necessary.SOR 360. |
| 25 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. AS PER DSR NO 1.10.1 |
| 26 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire AS PER DSR NO 1.14.2 |
| 27 | Add for Invertor wiring in wiring point for Light/Fan/Plug with 1.5 mm Cu. Wire AS PER UPPWD-189{A} |
| 28 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. AS PER DSR NO 1.31 |
| 29 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.AS PER DSR NO 1.32 |
| 30 | Supply and fixing of LED Tube Light with batten suitable for upto 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. - CAT-AAA (ASPER UPPWD 1413{A}) |
| 31 | Supply and fixing of recess/ Surface/ Pendent mounting round 10 Watt to15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.CAT-AA (ASPER UPPWD 1402) |
| 32 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. AS PER DSR 19.1 |
| 33 | Supply of 300mm sweep Exhaust Fan. {Only for Estimation} (AS PER M.R.) |
| 34 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.( AS PER DSR 1.25) |
| 35 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep AS PER DSR 1.50.1 |
| 36 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes AS PER DSR 1.51 |
| 37 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole AS PER DSR 2.10.1 |
| 38 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified AS PER UPPWD 725{A} |
| 39 | Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.AS PER UPPWD 716 |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests AS PER DSR 17.1.1 |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid AS PER DSR 17.2.1 |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require . (a) White Vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass pillar tap. AS PER DSR 17.7.4 |
| 43 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe (a) 32mm dia AS PER DSR 17.28.1.1 |
| 44 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms. AS PER DSR 18.65 |
| 45 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. AS PER DSR 17.16{a} |
| 46 | Providing & fixing PVC pipes conforming to IS make working pressure 6 Kg/cm² including testing, labour, T&P and all complete fittings. 110mm dia AS PER Aligarh UPPWD SOR, Ch-23 Item-32 (iii) |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 32mm dia nominal dia pipes AS PER DSR 18.7.4 |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 15mm dia nominal dia pipes AS PER DSR 18.8.1 |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 20mm dia nominal dia pipes AS PER DSR 18.8.2 |
| 50 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. (a) 15mm nominal bore AS PER DSR 18.21.2.1 |
| 51 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 (a) 15mm nominal bore AS PER DSR 18.49.1 |
| 52 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (a) 15mm nominal bore AS PER DSR 18.50.1 |
| 53 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 (a) 15mm nominal bore AS PER DSR 18.53.1 |
| 54 | Providing and fixing brass stop cock of approved quality. (a) 15 mm nominal bore AS PER DSR 18.16.1 |
| 55 | Providing and fixing brass stop cock of approved quality. (b) 20 mm nominal bore AS PER DSR 18.16.2 |
| 56 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. AS PER DSR 18.48 |
| 57 | Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 150 x 100 mm size P type AS PER DSR 19.4.2.1 |
| 58 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 7.5 (i) For Sewer Line AS PER DSR 19.7.1.1 |
| 59 | (A) Boring 150 dia bore hole including labuar, T & P etc. required for proper compelete of the work. {AS PER MAINPURI UPPWD SOR 2022-23 Dt. 01.04.2022 Ch. No. --22 SANITARY MATERIAL S.I.No. 73 (A) Insttallation of Submeraible Pump.} |
| 60 | (B) Lowring 110 dia mm PVC pipe in bore hole including labuar, T & P etc. rquire for proper compelete ofthe work. {AS PER MAINPURI UPPWD SOR 2022-23 Dt. 01.04.2022 Ch. No. --22 SANITARY MATERIAL S.I.No. 73 (B) Insttallation of Submeraible Pump.} |
| 61 | (C) Providing and fixing 110 mm dia PVC pipe 6KG/cm2 {AS PER MAINPURI UPPWD SOR 2022-23 Dt. 01.04.2022 Ch. No. --22 SANITARY MATERIAL S.I.No. 73 (C) Insttallation of Submeraible Pump.} |
| 62 | (D) Shrounding and packing graded coarse sand in between bore wall & the Strainer including supply of coarse sand, labour, T&P ete required for proper compeletion of work. As per DSR-23.7 |
| 63 | (E) Providing and fixing G.I. pipe 32mm dia Nominal bore compelete with GI Fitting As per DSR-18.12.3 |
| 64 | (H) Submersible pump Kirlosker / Crompton or equivalent 2.0 HP I.S.I. marked. {AS PER MAINPURI UPPWD SOR 2022-23 Dt. 01.04.2022 Ch. No. --22 SANITARY MATERIAL S.I.No. 73 (H) Insttallation of Submeraible Pump.} |
| 65 | (I) Single fase stater for submersible of I.S.I marked. {AS PER MAINPURI UPPWD SOR 2022-23 Dt. 01.04.2022 Ch. No. --22 SANITARY MATERIAL S.I.No. 73 (I) Insttallation of Submeraible Pump.} |
| 66 | (J) 2.5 mm Sq cable for submersible moter pump.{AS PER MAINPURI UPPWD SOR 2022-23 Dt. 01.04.2022 Ch. No. --22 SANITARY MATERIAL S.I.No. 73 (J) Insttallation of Submeraible Pump.} |
| 67 | (K) 4 Inch dia MS clamp made with 32*5 mm flate iron with nut & bolt As per DSR-23.14.1 |
| 68 | (L) 100 mm dia & P.V.C endcap. {AS PER MAINPURI UPPWD SOR 2022-23 Dt. 01.04.2022 Ch. No. --22 SANITARY MATERIAL S.I.No. 73 (L) Insttallation of Submeraible Pump.} |
| 69 | (M) Solution for jointing P.V.C pipe. 250 gram {AS PER MAINPURI UPPWD SOR 2022-23 Dt. 01.04.2022 Ch. No. --22 SANITARY MATERIAL S.I.No. 73 (M) Insttallation of Submeraible Pump.} |
| 70 | (N) 32 mm C.P.V.C pipe As per DSR 18.9.4 |
| 71 | (P) Nylon cloth for strainer including plastic rope, cutting holes in PVC pipe etc complete. {AS PER MAINPURI UPPWD SOR 2022-23 Dt. 01.04.2022 Ch. No. --22 SANITARY MATERIAL S.I.No. 73 (P) Insttallation of Submeraible Pump.} |
| 72 | Supply and fixing of Sign Board etc complete as per Engineer in charge. Please Enable Macros to View BoQ information |
