|
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for mirror polishing on Marble/ Granite/ Kota stone/ stone work wherever required to give high gloss finish complete all as specified and directed. |
| 3 | M&L for full round and polishing moulding (as per main stone polish) to edges of stone slabs upto 20mm thick such as in window cills, jambs, counters, steps etc and other similar situations complete all as specified and directed. |
| 4 | M&L for providing and laying plain cement concrete, 25mm thick, 1:2:4, type B0 (using 12.5mm nominal size crushed and graded stone aggregates) for levelling to receive screed for laying floor finish, finished fair and even complete all as specified and directed. |
| 5 | M&L for non skid coloured ceramic floor tiles of size of tile not exc.0.36 sqm each 6mm to 7mm thick (square/rectangular) as in floor laid over and including 15mm thick screed bed in CM 1:4, set, jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 6 | M&L for coloured glazed ceramic tiles jointless/edge cutted of size exc 0.09 Sqm but not exc 0.18 sqm, 6mm to 7mm thick as in vertical surfaces such as skirtimg, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing/rendering in cm 1:4 complete all as specified and directed. |
| 7 | Taking down chowkhats or frame with shutters (without taking off shutters from frames) not exc 1.5 Sqm each incl holdfasts from wall and making good in cement mortar 1:4 complete all as specified and directed. |
| 8 | S&F powder coated aluminium sliding window shutters with frames (minimum thickness of powder coating 50 micron) three track ( consisting of 02 Nos glazed shutters and 01 No gauge shutter) without sash bars including necessary joining cleats, glazing clips, EPDM rubber packing, powder aluminium snap beading, screws, wheels, locking arrangements, suitable handles for sliding purpose, 4mm thick tinted glass and mesh of dia 0.36mm and 1.40mm width of aperture, silicon chemical filling at gaps between section frame and wall surfaces complete all as specified and directed.. |
| 9 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 10 | S&F anodised aluminium window and ventilator shutters, hung type without sash bar including frame and 4mm thick froasted glass and aluminium section weighing 0.55 kg/m including necessary , joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc., complete all as specified and directed |
| 11 | S&F in replacement stainless steel wire cloth 0.36mm dia of wire and average width of aperature 1.40mm annd fixed in aluminium window shutters/steel door including new aluminium beadings of required size to secure wire cloth/ mesh/ welding/ nut bolt complete all as specified and directed. |
| 12 | S&F tinted glass 4mm thick, ordinary quality in existing aluminium window in square exc 0.5 sqm in each pane including taking down existing glass complete all as specified and directed. |
| 13 | Taking down shutter of any description and material exc 1.00 Sqm but not exc 2.00 sqm each complete all as specified and directed. |
| 14 | Taking down chowkhats or frame with shutters without taking off shutters from frames exc 1.5 Sqm but not exc 4.00 sqm each incl making good disturbed portion complete all as specified and directed. |
| 15 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed ounter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 17 | S&F chowkats 28mm to 30mm thick factory made wire mesh solid WPC door shutter consisting of density 650 Kg /Cum manufactured by an ISO-9001-2015 certified company , door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws. other hardwares should be fixed with 19x6mm size steel screws etc., complete as per direction of Engineer-in -Charge and manufacturer's specifications |
| 18 | S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 19 | S&F 200mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed. |
| 20 | S&F 100mm Mild steel butt hinges medium weight including necessary welding complete all as specified and directed. |
| 21 | Supply and fix 150 mm long cast type anodised aluminium handle complete all as specified and directed. |
| 22 | S&F floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring and vulcanised rubber piece complete all as specified and directed. |
| 23 | S&F mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate of soft closing hydraulic pattern including welding to frame as required complete all as specified & directed. |
| 24 | M&L for preparation of old painted steel surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted duly filled the voids with enamel based putty complete all as specified and directed. |
| 25 | M&L for preparing, washing, rubbing down and stopping of distempered surface and complete removal of existing treatment and painted surfaces and applying two coats of oil bound distemper using spunge roller including one coat of alkali resistant primer over 1.5 mm thick wall care putty in two coats on walls, pillasters, cornices etc, complete all as specified and directed |
| 26 | M&L for two coats of white wash on old decorated ceiling surfaces including necessary fillings of voids with wall care putty complete all as specified and directed. |
| 27 | M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.complete all as specified and directed. |
| 28 | Taking down cement plaster of any thickness and of any description over brick wall or ceiling surfaces including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 29 | M&L for 15 mm thick rendering in CM (1:6) over wall surface of any description and material finished even and smooth without using extra cement complete all as specified and directed |
| 30 | M&L for 15 mm thick rendering in CM (1:4) over wall surface of any description and material finished even and smooth without using extra cement complete all as specified and directed |
| 31 | M&L for 10mm thick rendering in cement mortar 1:3 and finished even and smooth with mixing of liquid water proofing compound on roof surfaces complete all as spcified and directed. Note WPC shall be measured and paid seperately. |
| 32 | Supply only integral waterproofing compound complete all as specified and directed |
| 33 | M&L for providing and laying/ fixing TPO membrane of non flammable water proofing of roof which shall be a 1.5mm thick loose laid TPO membrane layer overlapped to achieve a minimum weld of 110mm, Hoot air welding can either be hand applied or by means automatic machines and the rolles either end are overlapped with layers of non-woven geo textile fiber, the seperation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc Proofex ORG membrane or its equivalent in approved make by aluminium strip anchoring. Note : Work shall be executed by authorised applicator with prior experience of more than five years in applying similar system complete all as specified and directed. |
| 34 | Demolition of plain cement concrete (Un reinforced) in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 35 | M&L for providing and laying cement concrete,75 mm thick 1:3:6 type C1 (using 20mm nominal size crushed and graded stone aggregates) for plinth protection inlcuding filling of expansion joint with bituminous mixture finished fair and even complete all as specified and directed. |
| 36 | S&F in repairs, 15 mm bore chromium plated fancy type long body bib taps with crutch or buttrfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 37 | S&F in repairs, 15 mm bore chromium plated fancy type short body bib taps with crutch or buttrfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 38 | S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed. |
| 39 | S&F in repairs, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed. |
| 40 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore Material and labour |
| 41 | S&F in repairs, fancy type swivel shower of cast stainless steel square shape of minimum size 100mmx100mm including CP brass shower rod and cap washer wall/ flange for fixing with 15mm bore dia pipe/fittings complete all as specified and directed. |
| 42 | S&F in repairs, 20 mm dia brass chromiun plated tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed. |
| 43 | S&F in repairs, CP soap dish cast stainless steel fixed to wall with screw complete all as specified and directed. |
| 44 | S&F in repair vitreous China wash hand basin (flat back) of size 550x400x200mm including one number chromium plated waste fittings/coupling, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 45 | S&F 15 mm bore chromium plated, cast copper alloy pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 46 | Supplying and laying 20 mm nominal size UPVC pipe of pressure rating 10 Kgf per sqcm including plain and brass threaded special fittings of same size or of reducer or enlarged size fixed to wall/ceilings or laid in floors or necessary cutting/chasing in wall/ floor of any description and making good inlcuding taking down of existing tubing complete all as specified and directed. |
| 47 | Supplying and laying 25 mm nominal size UPVC pipe of pressure rating 10 Kgf per sqcm including plain and brass threaded special fittings of same size or of reducer or enlarged size fixed to wall/ceilings or laid in floors or necessary cutting/chasing in wall/ floor of any description and making good inlcuding taking down of existing tubing complete all as specified and directed. |
| 48 | S&F in repairs, 600mm x 450mm size beveled edge mirror of selected quality glass, 5.50 mm thick, mounted on 6mm thick AC pain building board or commercial plywood and fixed to wall with wooden plugs and chromium plated brass screws & cup washers complete all as specified and as directed. |
| 49 | S&F in repair vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including necessary PCC bedding and connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. |
| 50 | Dismantling and breaking up drain pipes (SGSW,AC, reinforced concrete, PVC or Cast iron) set in cement mortar of size 150/75 mm fixed over in wall or in floor including clamps etc complete all as specified and directed. |
| 51 | S&F in repairs 75mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls with necessary clamps complete all as specified and directed. |
| 52 | S&F in repairs 75mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors complete all as specified and directed. |
| 53 | S&F in repairs, 110mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls with necessary clamps complete all as specified and directed. |
| 54 | S&F in repairs 110mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors complete all as specified and directed. |
| 55 | S&F PVC (SWR) floor trap of outlet dia 75mm, plain with SS gratings 125x125mm size with openable circular grating with or without hole inlcuding jointing with solvent cement inlcluding fixing to pipe properly with solvent complete all as specified and directed. |
| 56 | S&F in repairs 25mm dia, decorative type stainless steel curtain rods with decorative type curtain brackets, middle brackets stops etc complete all as specified and directed. |
| 57 | Supply, hoisting and fixing of double layer, ISI marked 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 Nos PTMT/UPVC tank nipple and 25mm bore PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball including dismantling exisitng water tank of any type and any capacity complete all as specified and directed. |
| 58 | S&F in repair ball valve 25mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron/CPVC/PPR pipe and fjxed complete all as specified and directed. |
| 59 | S&F 25mm nominal bore UPVC, globe or gate valves connected with pipe with solvent of any material complete all as specified and directed. |
| 60 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 70 mm as in cupboards comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 61 | S&F 17mm to 18mm thick WPC board of approved make on one side prelam/rigidlam and other side plain colour fixed with screws, solvent cement/ adhesive to make cup board/ cabinet shutters/drawer front/ sides, partitions/shelves etc including 1mm thick PVC lipping/ beading fixed with solvent over edges of ply of required width and colour complete all as speciified and directed. |
| 62 | S&F anodised aluminium frame for sliding shutter frame, doors , windows, ventilators with or more rebates including joinng cleats for fixing etc complete all as speciified and directed. |
| 63 | S&F sliding door roller suitable for sliding 18mm to 19mm thick boards as per sketch attached complete all as speciified and directed. |
| 64 | S&F flush sliding door pull rectangular handle for 18mm to19mm thick board as per sketch attached complete all as speciified and directed. |
| 65 | S&F sliding wardrobe shutter lock for 18mm to 19mm thick board as per sketch attached complete all as speciified and directed. |
| 66 | Taking down chowkhats or frame with shutters without taking off shutters from frames exc 1.5 Sqm but not exc 4.00 sqm each incl making good disturbed portion complete all as specified and directed. |
| 67 | M&L for preparation of old decorated plastered of wall surfaces and applying 1.5mm thick Birla or equivalent wall putty to old plastered surface and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 68 | M&L for prepartion of old ceiling surfaces and applying two coats of oil bound distemper complete all as specified and directed. Please Enable Macros to View BoQ information |
