|
| 1 | Demolition of RCC Roof, floor (other than ground floor), beam, staircase, landing, chajja and similar suspended work complete all as specified and directed. |
| 2 | Demolition of brick work or stone boulder masonry built in cement mortar incl all quions arches pillars etc complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on internal wall surfaces and finished fair and even without using extra cement complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick in two coats (10+5) on brick or concrete surfaces in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and fair (without using extra cement) mixed with liquid water proofing compound 0.3% by weight of cement used upto 8 m height including necessary scaffolding complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately. |
| 6 | Supply only liquid water proofing compound complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered surfaces of wall , applying 1mm thick wall care putty and applying two coat of emulsion distemper white or coloured by auto roller complete all as specified and directed. |
| 8 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 9 | M&L complete removal of existing treatment from external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 10 | M&L for complete removal of existing treatment from old decorated plastered surfaces of wall and removal of nails etc & filling cracks/hole with putty and applying two coats of emulsion distemper white or coloured over a coat of primer complete all as specified and directed. |
| 11 | M&L for 1.50mm thick PVC sheet fixed on wall using adhesive and nails, joints filled with pvc mesh including applying putty on joints and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 12 | M&L for PCC type B1 (1:2:4) using 20 mm graded aggregate as in copings, cills, surface channels etc like slightly rounded or chamfered and throating complete all as specified and directed. |
| 13 | M&L for 75 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed. |
| 14 | M&L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in flooring/ hard standing complete all as specified and directed. |
| 15 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 16 | M&L for providing Colour non skid joint free ceramic tiles 7 to 8mm thick Square/rectangular, area of each tile exceeding 0.18 Sqm but ot exc 0.36 Sqm in floor of approved quality and pattern set , and jointed in neat cement slurry and pointed in coloured cement to match in floors including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 17 | All as per ser item No 16 above, but in vertical surface as in dado's/skirting including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 18 | M&L for joint free Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 19 | M&L for glazed ceramic coloured tiles of size 300x450mmx7mm/350x250x7mm thick on vertical surfaces such as skirtings, dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 20 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 21 | Demolition of cement concrete of any description and in any position un reinforced not otherwise specifically provided for complete all as specified and directed. |
| 22 | M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) in plinth protection including finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 23 | Taking down chowkat or frames n.exc 1.5 Sqm in each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed. |
| 24 | All as per ser item No 23 above, but exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed. |
| 25 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & ther Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 26 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 27 | S&F stainless steel Butt hinge 100mm size fixed to PVC frames complete all as specified and directed. |
| 28 | S&F Aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 29 | S&F Extruded aluminium handle fabricated type anodised 150mm long complete all as specified and directed. |
| 30 | M&L for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and directed. |
| 31 | M & L for Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- .2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass) (a) Area n.exc 2.00 Sqm Each |
| 32 | M & L for Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 33 | M&L sheet glass ordinary quality and glazing 4.80mm thick with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 34 | M&L 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 35 | M&L for taking down steel tubing and connections of 15 mm bore with all fitting complete all as specified and directed. |
| 36 | M&L for taking down steel tubing and connections of 20 mm dia with all fitting complete all as specified and directed. |
| 37 | M&L or laying 20 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 38 | M&L or laying 25 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 39 | Cutting chases in brick work, pinning in making good to facing where required and pointing to cement mortar 1:3 to ends for concealed water tubing and making good for cutting n.exc 10 cm girth complete all as specified and directed. |
| 40 | Dismantling of cast iron/PVC drain pipes jointed in cement mortar and taking out of walls for 75mm/100mm dia of Pipe complete all as specified and directed. |
| 41 | S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints 75 mm bore pipe, laid in trenches complete all as specified and directed. |
| 42 | All as per ser item No 41 above, but 110mm dia of pipe complete all as specified and directed. |
| 43 | S&F fix PVC (SWR) bend 75 mm with access door complete all as specified and directed. |
| 44 | S&F fix PVC (SWR) bend 110 mm with access door complete all as specified and directed. |
| 45 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed. |
| 46 | S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 47 | S&F PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets 10 Ltrs capacity including flush pipe and PVC connections etc., complete all as specified and directed. |
| 48 | S&F Vitreous china wash down water closet pan pedestal pattern (EWC) including plastic water closet seat, closet pattern with flat bottom, and cover and aluminised hinge device complete all as specified and directed. |
| 49 | S&F vitreous china wash basin size 550 x 400 mm white flat back excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 50 | S&F bib tap Chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of about 15mm bore diameter complete all as specified and directed. |
| 51 | S & F for 15mm dia CP Wall Mixer with Provision for Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed. |
| 52 | S&F Hand shower health faucet Abs body with wall hook and 1 meter long easy flex tube in chrome finish hose pipe for EWC including hinge with complete fitting complete all as specified and directed. |
| 53 | S & F Angular cock with Flange, fancy type chromium plated with long shank and cup (concealed type) for 15 mm bore pipe complete all as specified and directed. |
| 54 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed. |
| 55 | S & F 15mm dia Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed with 450mm Long Braided Hoses complete all as specified and directed. |
| 56 | S&F 15 mm bore chromium plated fancy type two way bib tap with flange, screwed down high pressure complete all as specified and directed. |
| 57 | Supply only waste fittings brass chromium plated 32 mm for sinks/basin etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed including 32mm dia waste pipe complete all as specified and directed. |
| 58 | M&L for 600 mm x 450 mm bevelled edge mirror or selected quality glass mounted on 6 mm thick AC building board on commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washer and fixed in repair complete all as specified and directed. |
| 59 | S&F PVC bath cabinet with built in shelf and looking mirror at shutters of size 54 x35x 13 CM of Make seniority brand complete all as specified and directed. |
| 60 | M&L tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated in repair complete all as specified and directed. |
| 61 | S&F in repair 25mm dia fancy type brass brackets of selected color for decorative curtain rods complete all as specified and directed. |
| 62 | S&F PVC Corner glass shelf (with bracket) , fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. |
| 63 | M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 64 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 65 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 66 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 67 | M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mps as in roof ridge, covering/cladding to wall fixed with self tapping screws or \\"J\\" hook complete all as specified and directed. |
| 68 | M&L for 6mm thick PVC hollow false ceiling board including 1200x600mm size aluminium concealed frame work with 4mm dia G.I wire hangers to fix the framework with RCC slab/Truss complete all as specified and directed. |
| 69 | M & L for 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 70 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed. |
| 71 | M&L for PVC/WPC 18mm thick board of density 650 Kg/m3 pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 72 | S&F of brass Handle fancy type 75 mm size complete all as specified and directed. |
| 73 | S&F 40mm width of flaps Continuous (piano) hinge, steel, bright finish or electro galvanised complete all as specified and directed. |
| 74 | S&F Magnet of suitable size fixed for cabin leafs, drawers etc, complete all as specified and directed. |
| 75 | M&L 12mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 76 | M & L for servicing of modular kitchen cabinets including taking down baskets and refixing in the same opening after realigned the sliding channel, easing and serviceable complete all as specified and directed. |
| 77 | S & F in repair of Designer Stainless steel baskets of any type and any size of length n.exc 750mm and depth n.exc 500mm and height n.exc 200mm complete all as specified and directed. |
| 78 | M &L Chipping off existing loose, damaged Concrete from RCC members of all affected RCC Columns, Beams, Slabs and Chajjas on External and internal facades, etc beyond main r/f. (if required in the opinion of the Consultant), carefully with chisel and hammer Providing and applying ‘Rusticide SS’ Rust passivator or equivalent as specified in the Brand Names to existing r/f. bars Including wire brushing of reinforcement , cleaning washing of concrete etc complete as directed. Providing and applying two coats of rust prevent or slurry made out of “Polyalk Fixoprime” or equivalent as specified in the Brand Names and cement in proportion 1:1.5 to existing r/f.bars as directed complete. Providing and applying bonding coat of slurry made out of “Polyalk EP” or equivalent as specified in the Brand Names and cement in proportion 1:1 to concrete and r/f substrates complete all as specified and directed. Providing and applying “Polyalk EP” or equivalent as specified in the Brand Names. Polymer modified cement mortar in Required proportions(1:5:15) to RCC members Including Hand packing, curing and making the surface rough for plastering |
| 79 | M &L Moistening the Cracks, Providing and applying priming/bonding coat of slurry made out XX of “Polyalk EP”and cement (or equivalent as specified in the List of Brand names) in proportion 1:1 to surfaces prepared as instructed and directed. Filling the Cracks /Grooves by Providing and applying “Polyalk EP” Polymer modified cement mortar (or equivalents specified in the List of Brand names) in Proportion of 1: 5: 15 (Polyalk EP: Cement: Graded sand/quartz sand) on the prepared surfaces and finishing it in level with the existing plaster Including Hand packing, curing and making the surface similar to the external plastering using wooden floats/punch etc complete all as specified and directed. |
| 80 | M & L for Roughening surfaces of old plastered wall by chipping plaster at 5cm interval and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sq. metre to receive backing coat complete all as specified and directed. |
| 81 | M&L for glazed ceramic coloured tiles of size 300x450mmx-6-7mm thick on exterior vertical surfaces such as skirtings, dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 82 | Dismantling of existing Brick tiles or terracing tiles, single layer on roofs including Wire brushing and cleaning top surface of cement concrete, including flashings and junction of parapets, etc and removing debris/rubbish materials out side MoD land complete all as specified and directed. |
| 83 | M and L for 50mm thick PCC 1:2:4 type B-0, (using 12.50mm graded aggregate) as padding concrete over roof complete all as specified and directed. |
| 84 | M&L for Applying evenly a priming/tack coat with coat of hot blown bitumen 85/25 at the rate of 1.20 Kg per Sqm .Over this APP based polymeric water proofing membrane minimum weighing 3Kg/ Sqm minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) laid over primed roof surfaces by forced application and vertical surfaces up to grooves and width of overlap 75mm at the sides and 100mm in ends including 10mm thick plastering on fair faces of concrete surface in CM 1 : 4 with water proofing compound @ 0.25% by weight of cement even and fair surface complete all as specified and directed. |
| 85 | M&L for MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and directed. |
| 86 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 87 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
