|
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 2 | M&L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | M&L for thick PCC 1:4:8 type D-2 (using 40mm graded agg) as in foundation, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 5 | Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc complete all as specified and directed. |
| 6 | M&L for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, Cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed. |
| 7 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 8 | M&L for Vitrified Ceramic tiles light shade 9-10 mm thick area of each tiles not exc 0.36 Sqm, in floors laid over and including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 9 | M&L for Vitrified tiles light shade 8-10 mm thick area of each tile n. exceeding 0.36 sqm in skriting/vertical surface laid over and including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 10 | M & L for non skid coloured ceramic floor tiles of size of tile exc. 0.11 but n.exc.0.18 sqm each 7 mm thick as in floor laid over and including 15mm thick screed bed in CM 1:6, set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 11 | M & L for colour glazed ceramic wall tiles of size 450x300x6-7mm thick on vertical surfaces laid over and including for rendering 10mm thick in CM (1:4) on vertical surface of wall. cement screed bet set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 12 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 13 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 14 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed. |
| 15 | Taking down cement plaster of any description on brick work or stone masonry walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 16 | M&L 15 mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement on wall complete all as specified and directed |
| 17 | M & L rendering 15mm thick on cement mortar 1:4 brick or concrete work finished the surface even and fair without using extra cement complete all as specified and directed. |
| 18 | M&L for preparation of old ceiling surfaces and applying two coats of oil bound distemper complete all as specified and directed. |
| 19 | M&L steel Thermo Mechanically Treated (TMT) bars 8-10 mm dia and over, cut to length, bent to shape as required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 20 | M&L formwork to soffit of suspended slab such as roof slab floor slab, landing and similar work not exc. 200mm thick, complete all as specified and directed. |
| 21 | M&L formwork to edges of concrete flats, treads, breaks in floors window cills ,concrete railings, opening in concrete, wall, floor and roofs n.exc 20 cm wide and sides of RCC bands in walls horizontal or sloping and similar work exc10 cm but n.exc 20 cm wide complete all as specified and directed. |
| 22 | M&L for RCC 1:2:4 type B-1 using 20mm graded aggregate as in slab, etc. complete all as specified and directed. |
| 23 | M&L for Granite (of any type) tiles 18 - 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in CM 1:6, including grinding and polishing complete all as specified and directed.. |
| 24 | Taking down chowkat or frame n.exc 1.5 Sqm and n.exc 4.00 sqm in each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed. |
| 25 | Taking down chowkat or frame exc 1.5 Sqm and n.exc 4.00 sqm in each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed. |
| 26 | M&L 1.25 mm thick pressed steel frame of size 105X 60 mm for door with one ore more rebate including necessary fixing lugs, stainless steel hinges, locks strike plate etc complete all as specified and directed |
| 27 | M&L factory made 35mm thick flush shutter solid core construction with block board core and plywood face panel commercial type on both faces complete all as specified and directed. |
| 28 | S&F Mortice Lock, vertical type of brass 100mm 4 levers with duplicate keys complete all as specified and directed. |
| 29 | M&L powder coated Anodised aluminium window & ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long (2 nos) suitable handle 1 No complete all as specified and directed. |
| 30 | M&L powder coated Anodised aluminium door shutters side, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screw, etc complete all as specified and directed. |
| 31 | M&L 4mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed. |
| 32 | M&L 5.5 mm thick sheet glass ordinary quality and glazing each pane fixed with neopune rubber gasket in aluminium frame work complete all as specified and directed. |
| 33 | M&L stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and directed |
| 34 | M&L for 4 mm thick aluminium composite panel board of minimum tensile strength 4.5 Kg/Sqmm fixed in aluminium frame work complete all as specified and directed. |
| 35 | M&L 4 mm thick one side frosted sheet glass ordinary quality and glazing in square n.exc 0.5sqm in each pane fixed with neopune rubber gasket in aluminium frame complete all as specified and directed. |
| 36 | M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 37 | M&L fabricated powder coated anodized aluminium grill of size 75x75 mm, using 6mm dia bars fixed to outer portion of chowkhat using U/V section runners complete all as specified and directed. |
| 38 | M&L framed work such as grills gratings, etc with ends of bar shouldered and/or revised or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanka and similar works confirming to Fe 290 Gde E-165 complete all as specified and directed. |
| 39 | M&L for PCC type C1, 1:3:6 (using 20 mm graded aggregate) for holdfast blocks complete all as specified and directed. |
| 40 | M&L for preparation of new plastered surfaces of wall and applying 1.5mm thick Birla or equivalent wall putty and applying two coats of oil bound distemper over a coat of priming paint complete all as specified and directed. |
| 41 | M&L for complete removal of existing treatment of internal wall surfaces and applying 1.5mm thick Birla or equivalent wall putty to old plastered surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 42 | M&L for PCC (1:2:4) type B1 (Using 20 mm graded stone aggregate) as in coping, kerbs etc complete all as specified and directed. |
| 43 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 44 | Material and labour for 75mm thick plain cement concrete type B-2, 1:4:8 (using 40mm graded aggregate) as in floor complete all as specified and directed. |
| 45 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab (1:6) including rubbing and polishing complete all as specified and directed. |
| 46 | M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab(1:4) including rubbing and polishing complete all as specified and directed. |
| 47 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick with grey cement and pigments set, jointed & pointed in neat cement slurry, laid over 20mm thick screed bed in CM 1:6 finished with pigments match the shade of tiles complete all as specified and directed. |
| 48 | M&L for preparation of new wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 49 | M&L preparation of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and directed. |
| 50 | M&L preparation of old Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 51 | S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 52 | S&F door stopper of aluminium alloy body and tongue, anodised with hard drawn spring complete all as specified and directed. |
| 53 | M&L of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed. |
| 54 | M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 55 | M&L for preparation of new plastered surfaces of walls and applying two coats of exterior weather coat over a coat of exterior primer for camouflage design necessary scaffolding complete all as specified and directed. |
| 56 | M&L 20mm bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings complete all as specified and directed. |
| 57 | M&L15mm bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings complete all as specified and directed. |
| 58 | M&L PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 59 | S&F PVC (SWR) 110mm dia bend in any radius complete all as specified and directed. |
| 60 | M&L of PVC (SWR) 75 mm dia pipe as per specification complete all as specified and directed. |
| 61 | S&F for 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 62 | M & L for 75 mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 63 | S & F 75mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 64 | M & L Vitreous china ware wash down water closet pan (EWC), pedestal pattern coloured including plastic WC seat black closed pattern eith flat bottom and cover and steel chromium plated of aluminised hinging device, complete fitting complete all as specified and directed. |
| 65 | S&F 15mm bore bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 66 | S&F 15mm bore Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 67 | S&F 15mm bore angle stop cock, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 68 | S&F PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket , inlet ball valve, float handle and flush pipe (for EWC or WC) etc complete all as specified and directed. |
| 69 | S&F for PVC Connection pipe 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 70 | S&F vitreous china wash hand basin (Oval type) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 71 | S&F for vitreous china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe. CP waste coupling complete all as specified and directed. |
| 72 | S & F for Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 73 | S&F toilet paper holder, coloured vitreous china, box type fixed in wall complete all as specified and directed. |
| 74 | S&F soap dish, vitreous china white, aprox size 160 X 160 X 90 mm. fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 75 | S&F CP towel rail 600mm long with bracket, aluminium anodised 20mm dia complete all as specified and directed. |
| 76 | S&F CP grating 100mm dia PTMT with waste hole complete all as specified and directed. |
| 77 | S&F CP Health Faucet suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection fixed in position complete all as specified and directed. |
| 78 | S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 79 | S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polyethylene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed. |
| 80 | S & F 100 mm Butt hinges, medium weight cold rolled, mild steel and fixed complete all as specified and directed. |
| 81 | S&F 150mm long aluminium anodised tower bolt of extruded section and fixed, complete all as specified and directed. |
| 82 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed . |
| 83 | S&F sink with drainage board made of stainless steel 1.00mm thick sheet for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 84 | S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. |
| 85 | M&L Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 86 | M&L factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site with three nos of MS hinge medium grade complete all as specified and directed. |
| 87 | M & L for precast cement concrete1:2:4 type B-1 using 20 mm stone aggregate as in manhole cover slabs round square or rectangular in shape and set in CM 1:4 complete all as specified and directed. |
| 88 | M&L for PCC 1:3:6 type C-2 (40mm grade stone aggregate) as in bed to 110 mm dia SGSW /PVC pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 89 | M&L for PCC 1:2:4 type B-0 using 40mm aggregate as in surface channel/ benching in manhole etc complete all as specified and directed. |
| 90 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing, benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed. |
| 91 | M&L for cutting chasing pinning in making good to facing where required for concealed water tubing etc n. exc 10 cm girth in brick wall complete all as specified and directed. |
| 92 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets , removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc complete all as specified and directed. |
| 93 | M& L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multi stranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing caping/ PVC Conduit (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metallic bodies of luminaire/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement and complete all as specified and directed for the following:- (a) One light point or one fan point controlled by one switch with cables 1.5 sq. mm size Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. |
| 94 | All as per ser item No. 93 above, but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified and directed. |
| 95 | All as per ser item No. 93 here in before, but for One 5 Amp 5 pin socket outlet point on independent board complete all as specified and directed. |
| 96 | All as per ser item No. 93 here in before, but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes complete all as specified and directed. |
| 97 | S&F in replacement switch piano flush button 5 Amp single pole one way 230 volts white finish complete all as specified and directed. |
| 98 | S&F in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 99 | S&F in replacement switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 100 | S&F in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC complete all as specified and directed. |
| 101 | S&F in replacement energy efficient Street/ Roadway/Building Security Luminaire LED fitting upto 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including brackets and all accessories needed to fixed to the wall or pole all as per site requirement and complete all as specified and directed. |
| 102 | S&F ceiling fan complete with blade, down ros, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 103 | S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blade, and frame and louver including suitable hole in existing wall complete as per site requirement and complete all as specified and directed. |
| 104 | S&F LED light fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 105 | S&F in replacement LED panel light 36 watt efficient LED recessed luminaire 2 ft x 2 ft (>100 Lumen/Watt) to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination for armstrong/ grid ceiling or similar ceiling mounting system with concealed complete prewied complete as per site requirement and complete all as specified and directed. Note : Rate for removing of existing unserviceable old luminaire is deem to be included in this item rates. |
| 106 | S&F in replacement stepped type electronic fan regulator Socket type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed. |
| 107 | S&F in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish complete all as specified and directed. |
| 108 | M&L in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earthing cable drawn in conduit/ casing and caping will be measured as one length of sub main with colour code Red Black and Green. (ii) PVC conduit / casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. |
| 109 | S&F in replacement TPN distribution board 415volts sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 220volts, 200 Amp rated bus bar with front openable cover suitable for TPN 4 ways MCB complete all as specified and directed. |
| 110 | S&F in replacement SPN distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways complete all as specified and directed. |
| 111 | S&F in replacement MCB SPN/DP 32 Amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and directed. |
| 112 | S&F in replacement MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and directed. |
| 113 | S&F in replacement MCB TPN 16 to 32 Amp rating 415V, 10KA 'B' curve complete with connection testing and commissioning complete all as specified and directed. |
| 114 | M&L in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thickness buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board complete all as specified and directed and testing on completion. |
| 115 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
