|
| 1 | Item Rate BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: The Executive Engineer / Chennai Division-I Name of Work: Annual Maintenance works to CBCID office building in old COP campus, Egmore in Chennai city for the Period from 01.06.2026 to 31.03.2027. Contract No: DB/Ch.I/6508/2025 Bidder Name : BOOKLET - 4TENDER CODING SHEET ( BOQ) CONTAINS : 22 Pages( RATES TO BE FILLED UP BY THE TENDERER IN THIS CODING SHEET )SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make Qty Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against 1 No Item Quoted Currency in INR / Other Currency Rate exclusive of GST in Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Rate exclusive of GST in words AMOUNT Rs. P. AMOUNT Rs. P. TOTAL AMOUNT In Words |
| 2 | Labour charges for engaging Electrician grade-I for the period from 01.06.2026 to 31.03.2027 |
| 3 | Labour charges for engaging Plumber grade-I f for the period from 01.06.2026 to 31.03.2027 |
| 4 | Labour charges for engaging Carpenter - II for the period from 01.06.2026 to 31.03.2027 |
| 5 | Labour charges for engaging scanvangers Mazdoor-I for the period from 01.06.2026 to 31.03.2027 |
| 6 | Supply and delivery of following of water supply and sanitary fittings of approved make (ISI) a. PVC low level flusing tank with all internal fittings (wall mounting type) white -10litre capcity |
| 7 | b. EWC seat cover |
| 8 | c. 15mm dia CP angle cock |
| 9 | d. Waste hose 1' 1/4\\" (32mm) |
| 10 | e. connection hose |
| 11 | f. CP shower arm with overhead shower rose |
| 12 | g. 15mm dia Stainless steel swan neck tap |
| 13 | h) stainless steel health faucet |
| 14 | i. Brass chomium plated piller tap (heavy type)15/12mm dia |
| 15 | j. 15mm dia stainless steel long body tap (heavy duty) |
| 16 | k. CP two way bib cock with health faucet |
| 17 | l. Special type Mirror of size 1000x780mm |
| 18 | m. Special type Mirror of size600x450mm |
| 19 | n. Supply of lipped mouth Porcelain Flat Back urinal superior variety approved brand |
| 20 | o. porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories |
| 21 | p. Stainless steel towel rack 600mm long with lower hanger |
| 22 | q. CI Grating-100mm dia |
| 23 | r. 32mm dia UPVC Ball valve with one side compression end and other side female end as per ISO 4422-4 and tested as per BS 6920 in WRC-NSF Ltd, UK |
| 24 | s. 32mm dia Gun metal Gate valve (Heavy duty) |
| 25 | t. Brass Waste coupling with required dia |
| 26 | Supplying, laying, fixing and jointing the 50mm dia UPVC pipes above ground level |
| 27 | Supplying and delivery of the following electrical fittings of approved make ISI a. 24W LED 4000K 2x2 square type recessed fittings with LED |
| 28 | b. Supply and delivery of LED 7W/9W Bulb |
| 29 | c. 300mm(12\\") sweep AC Exhaust fan (Heavy duty) |
| 30 | d. stepped Electronic 300 W / 450W square type fan regulator |
| 31 | e. 4' 18w crystal glass LED tube light fittings |
| 32 | f. 18w LED 3000k round type recessed fittings with LED |
| 33 | g. 18w LED square type surface fitting |
| 34 | h. 80w LED Focus light fitting with LED |
| 35 | i. 120w LED street light fittings with LED |
| 36 | j. 40w LED 4000k 2x2 square type recessed fitting with LED |
| 37 | Supplying and fixing of 15 amps 3 pin plug type socket on a suitable size PVC box (Fire restardent box) |
| 38 | Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable (Open wiring) |
| 39 | Supplying and clamping of 3.5 core 25 sqmm PVC armoured LTUG cable on wall and ceiling above ground level |
| 40 | Supplying and fixing of cable gland suitable for 3.5 core 25sqmm PVC armoured LTUG cable |
| 41 | Supplying and fixing of cable end termination for 3.5 core 25 Sqmm PVC LTUG Aluminium armoured cable |
| 42 | Removing the existing ceiling fan of 48\\" dia sweep and removing the wornout coil and rewinding with new copper coil |
| 43 | Cleaning the existing RCC 25000 litre sump/ RCC over head water tank using cleaning beaching powder, |
| 44 | Cleaning the existing 5000 liters capacity cylindrical HDPE / PVC over head water tanks 2 nos without affecting the adjustant structures and pipe lines |
| 45 | Supply of Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type |
| 46 | Supplying and delivery of the following electrical fittings of approved make ISI including cost & conveyance etc., all complete and as directed by the departmental officers.a. 20Amps MC plug with 3 pin top |
| 47 | b. 40A, 30MA 4P RCCB/ELCB (Higher end) |
| 48 | c. 40A, DP MCB isolator (Higher end) |
| 49 | d. 63A, 4P 10KA MCB isolator |
| 50 | e. 100A, 4 P MCB isolator |
| 51 | f. swiches 5 Amps flush type |
| 52 | g. socket 5 Amps 3 pin 2 pin combined flush type wall socket |
| 53 | h. PVC insulation tape (19mm) |
| 54 | i) 63 Amps HRC fuse unit (higher end) |
| 55 | j. 250 Amps three phase 4 pole change over switch |
| 56 | k) 250 A 4 pole MCCB |
| 57 | l) 250 Amps HRC fuse unit |
| 58 | m) 48W LED street light fitting with LED (Higher end) |
| 59 | n) single pole 6A to 32A, 10 KA (legared/ Hager/ Equivalent make) |
| 60 | o. 125 Amps 4 pole MCCB |
| 61 | Supply and delivery of following furniture fittings for replacing the damaged furniture fittings with ISI approved makea. Aluminium door stopper with rubber bush with required screws |
| 62 | b. Tower bolts (with required screws) 150mm long and 12mm dia |
| 63 | c. Aldrop - 200mm long and 16mm dia with required screws, bolts and nuts |
| 64 | d. Handles \\"D\\" type of 150mm long with requied screws |
| 65 | e. 125mm x 30mm butt hinges with nylon washer of various sizes of length and width (with required screws) |
| 66 | f. 100mm x 30mm butt hinges with nylon washer of various sizes of length and width (with required screws) |
| 67 | g. Imax casement window hinges |
| 68 | Supply of PVC Roller for Sliding Windows including cost of materials and conveyance charges |
| 69 | Supply of Hydraulic Floor springs of various sizes double action hydraulic floor spring |
| 70 | Suuply of Mortice Lock-(Godrej or equivalent) with required screws with 3 Keys With night latch |
| 71 | Supplying and fixing of 4mm thick pin headed Glass panels with aluminium anodised |
| 72 | Labour Charges for removel of Submersible pumpest in bore well/Open well up to 5HP |
| 73 | Removing the motor coil from the existing Submersible plumpest of 5HP including removing coil and rewinding of worn out |
| 74 | Labour Charges for re-erection of Submersible plumpest in bore well/Open well up to 5Hp |
| 75 | Conveyance of power pumpset (centrifugal, jet and submersible) and its accessories from divisional stores to site of works. Conveyance upto 10 Kms |
| 76 | Supply and fixing of Brass foot valve 50mm dia with ISI approved make |
| 77 | Supply and delivery at site and fixing of SFRC cover slab with framea. 60x60 cm |
| 78 | Supplying and fixing of single leaf Soild core flush door shutters a. 1000x 2400mm |
| 79 | Painting the old wood work with two coats of approved Ist class synthetic enamel paint |
| 80 | Painting the old walls with one coat of first class ready mixed plastic emulsion paint |
| 81 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 50 LPM x 75m |
| 82 | Labour charges for the erection of submersible pumpset in borewell/ openwell Upto 5HP |
| 83 | Supply and delivery of direct online three phase panel board - DOL with two level guard and auto starter 5 HP |
| 84 | Supplying and laying of 3 core 4 sqmm PVC insulated and sheathed flat type copper L.T. cable |
| 85 | Supply and delivery of 12mm thick Nylon rope of best approved quality etc., |
| 86 | Supply and delivery of following Electric Ceiling fan with ISI mark a) 48\\" 1200 sweep ceiling fan 5 star rated (Higher end) |
| 87 | Supplying and fixing EWC superior variety (white) Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
