|
| 1 | Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core Reference : PWD Schedule Page No. : F-1Item No. : 3(a) |
| 2 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed Reference : PWD Schedule Page No. : F-2Item No. : 1 ( a ) |
| 3 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :Reference : PWD Schedule Page No. : F-4Item No: 7a ,c & d [For 4 core upto 10 sqmm] |
| 4 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :Reference : PWD Schedule Page No. : F-4Item No: 7a ,c & d [For 4 core upto 16 sqmm] |
| 5 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :Reference : PWD Schedule Page No. : F-4Item No: 7a ,c & d [For 3½ core upto 25 sqmm] |
| 6 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : Reference : PWD Schedule Page No. : F-5Item No. : 8(b)[4 core 10 sqmm] |
| 7 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : Reference : PWD Schedule Page No. : F-5Item No. : 8(b)For[ 4 core upto 16 sqmm] |
| 8 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : Reference : PWD Schedule Page No. : F-5Item No. : 8(b)[For 3½ core upto 25 sqmm] |
| 9 | Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works [19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire ] Reference : PWD Schedule Page No. : E-2Item No. : 3, Sub. Item No.: (b) |
| 10 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required [50 mm dia ] Reference : PWD Schedule Page No. : F-6Item No. : 11 , Sub. Item No.: (d) |
| 11 | Excavation of soil for installation of Earth Electrode and filling & ramming. [for soft soil] Reference : PWD Schedule Page No. : G-1Item No. : 1, Sub. Item No. : (a) |
| 12 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe Reference : PWD Schedule Page No. : G-1Item No. : 2, Sub. Item No.: (a) |
| 13 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe Reference : PWD Schedule Page No. : G-2Item No. : 3, a |
| 14 | Extra for treatment of soil by using salt & charcoal or coke for pipe electrode Reference : PWD Schedule Page No. : G-2Item No. : 3 ,b |
| 15 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. asrequired and mending good damages. No. 8 SWG Reference : PWD Schedule Page No. : G-2Item No. : 5, Sub. Item No : ( iii ) |
| 16 | Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl.drilling holes, with bolts, nuts, washers etc. Reference : PWD Schedule Page No. : G-3Item No. : 5(d) |
| 17 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, onecompression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosivepaint. Reference : PWD Schedule Page No. : H-5Item No. : H(5) |
| 18 | LED Flood Light, powder coated pressure die cast aluminum(System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 VoltAC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P.F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as perLM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) Reference : PWD Schedule CPWD-VOL-II(2025) SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junctiontemperature shall not rise above 90°C). Page No. :14Item No. :1.1 200 watt FLOOD LIGHT Reference : PWD Schedule CPWD-VOL-II(2025)Page No. :14Item No. :1.1, Sub. Item No. : 1.17.5 |
| 19 | Supply of following size L.T. cable, working voltage 1.1 KV grade, heavy duty XLPE insulated, armoured, stranded, Al distribution power conductor cable. [Rate Analysis] [3.5C, 25 sqmm] |
| 20 | Supply of following size L.T. cable, working voltage 1.1 KV grade, heavy duty XLPE insulated, armoured, stranded, Al distribution power conductor cable. [Rate Analysis] [4C, 16 sqmm.] |
| 21 | Supply of following size L.T. cable, working voltage 1.1 KV grade, heavy duty XLPE insulated, armoured, stranded, Al distribution power conductor cable. [Rate Analysis][4C, 10 sqmm.] |
| 22 | Supplying & fixing Aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish.Compatible for all post top range. Window - Plasma cut & duly chamfered opening window of 300x110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole. Decorative sleek casting ring to increase aesthetical appeal. MAKE -ECO POLE 3M TOP Ø 76 MM of HAVELLS . OR equivqlent model of K-Lite / Reytek / Lumios / Schreder as per direction of EIC. [Rate Analysis] |
| 23 | Supplying & fixing Aesthetically designed decorative pole base cover, enhancing the appearance of the pole.MAKE -STARK Decorative Pole Base Cover of HAVELLS . OR equivqlent model of K-Lite / Reytek / Lumios / Schreder as per direction of EIC. [Rate Analysis] |
| 24 | New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aestheticallydesigned with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDsas light source. Clear Cover offers bright illumination for different applications. MAKE -RUBYNXTPT30WLED757PSYMTOPC of HAVELLS . OR equivqlent model of K-Lite / Reytek / Lumios / Schreder as per direction of EIC. |
| 25 | Supplying & fixing 10W LED Two-way Wall Washer light. MAKE-582061 of PHILIPS OR equivqlent model of CROMPTON /K-LITE / HAVELLS as per direction of EIC. (Rate analysis) |
| 26 | Supplying & fixing Bollard light. MAKE-LBLTW-10-WW of CROMPTON OR equivqlent model PHILIPS /BAJAJ / HAVELLS as per direction of EIC. (Rate analysis) |
| 27 | Supplying & fixing LED Adjustable Spot light fixture.MAKE -DWL-BCH-5048XBC of JAQUAR.OR equivqlent model CROMPTON /PHILIPS/K-LITE / HAVELLS as per direction of EIC. (Rate analysis) |
| 28 | Supplying & fixing LED Adjustable Spot light fixture.MAKE -DWL-BCH-5048XBC of JAQUAR.OR equivqlent model CROMPTON /PHILIPS/K-LITE / HAVELLS as per direction of EIC. (Rate analysis) |
| 29 | Supplying & fixing LED Spike light fixture. MAKE-MAKE-31385 of PHLIPS OR equivqlent model CROMPTON /Jaquar / HAVELLS as per direction of EIC (Rate analysis) |
| 30 | Supplying & fixing 500W LED Dazzling rope light for opulent spaces IP65 rated linear lighting solution for both outdoor and indoor application & 50mtr Length. MAKE LED Marathon Rope 10W 72 LED (WW) of PHILIPS OR equivqlent model of CROMPTON /BAJAJ / HAVELLS as per direction of EIC. (Rate analysis) |
| 31 | Supply & installation of glow sign board which typically consists of a sheet or panel made of translucent material, such as acrylic, with a message as quotated. The each indivisual letter is illuminated from behind using orient/philips make led lights as source which gives the sign of its glowing effect. the complete unit is washable, rain proof, sun light proof. (IP-65) with a comprehensive warrenty of 5 years on LED lights.(exept external physical Damage). ( MED Vetted) |
| 32 | Supplying & Erection of medium size feeder pillar box of Size Each 9241.00 (1200 x 750 x 450 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MSAngle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5\\" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C UD & MA Sch - Series-A UDMAD Page No. : 7Item No. : 39 |
| 33 | Supplying of Bakelite Sheet. a) 3 mm thick UDMAD , Series-B Page No. : 15Item No. : 11 |
| 34 | Supplying and fixing 415 V Four Pole MCCB ofBreaking capacity 25kA/35kA with fixed thermaland fixed magnetic / adjustable thermal and fixedmagnetic setting in existing DBs / enclosure andnecessary connection. Legrand :100 A, FP PWD Sch Page - D-8 -10 |
| 35 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection PWD-2017 Page No. : D-6 Item No. : 7[Legrand : (6-32)A, 415V, FP MCB] |
| 36 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection PWD-2017 Page No. : D-6 Item No. : 7(6-32)A, 240V, DP MCB |
| 37 | Supply and delivery of Electronic Timer suitable for240/ 360/415V, 50 Hz(Make: L&T/ABB/Schneider/Simence/GE/Minilic) of the following time (Second) range: b) 12.0 to 120.0. UD & MA Sch - Series-B UDMAD Page No. : 18Item No. : 31 |
| 38 | Supply and fixing of 240/230 volt, 50 Hz, T.P., powercontactor (Make: L & T/ABB/Schneider/Simence/ GE) havingcontact block of the following range. i) 95-160Amp, 2NO+2NC UD & MA Sch - Series-B UDMAD Page No. : 16Item No. : 18 |
| 39 | GST @ 18% |
| 40 | Labour Welfare Cess @ 1% Please Enable Macros to View BoQ information |
| 41 | Labour Welfare Cess @ 1% Please Enable Macros to View BoQ information |
