|
| 1 | Demolishing brick work in cement mortar up to floor V level including stacking of serviceable material and disposal of unserviceable material within the campus as per directions of EIC. |
| 2 | Demolishing cement concrete work, including disposal of unserviceable material within the campus as per directions of EIC 1:3:6 or richer mix. |
| 3 | Dismantling tiles with old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within the campus as per directions of EIC. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including the cost of centering, shuttering, finishing and reinforcement all work up to all levels. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed |
| 5 | Steel WorkReinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete up to all floors. Thermo mechanically heated bars |
| 6 | Removing mortar from bricks and cleaning bricks including stacking within the campus. (stacks of cleaned bricks shall be measured) (brick work in cement mortar) |
| 7 | Labour for Brick work with FPS bricks of class designation 75 in super structure up to all floors.In cement mortar 1cement: 6 fine sand mortar. |
| 8 | Brick work with FPS bricks of class designation 75 in super structure up to all floors.In cement mortar 1cement: 6 coarse sand mortar. |
| 9 | Wood Work.Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position including a coat of black Jaipan.imported wood. |
| 10 | 12mm thick cement plaster on brickwork / concrete wall of mix 1:6 (1cement: 6 coarse sand) |
| 11 | Providing 40x5mm flat Iron hold fast 40 cm long including fixing of frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) |
| 12 | Providing and fixing 30-35 mm thick glazed shutters for windows and clearstory windows using 8.70kg/Sqm. (3.5mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws and all fittings like tower bolt,handles etc. imported wood. |
| 13 | Providing and fixing 30-35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled M.S. butt hinges with necessary screws and all fittings like tower bolt, handles etc. imported wood. |
| 14 | Providing and fixing 30-35 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including cost of 25-35mm thick paneling of approved design with required beading/moldings imported wood and all fittings like tower bolt, handles etc. |
| 15 | Providing and fixing of wooden paneling/ lining of 12mm (+ 2mm thickness) in required design/pattern as per the EIC directions including cost of screws, wooden plugs etc. complete as per directions of EIC made from Budloo wood |
| 16 | French spirit polishing, Two or more coats in appropiate layers and shade on new works including preparation of surfaces with appropiate guages of sand paper and other appropriated coats in layers (like sealer, PU coats etc) as per EIC directions |
| 17 | Providing and fixing water proof BWR ply wood ISI marked including cost of nails adhesive etc. complete at all places.12mm |
| 18 | Providing and fixing of Herringbone laminated board flooring AC V/IV using HDF solid core planks of specified thickness approved quality and color with tongued and grooved jointing including cost of thermo cot and other accessories like concave, nosing, door/ T profile wherever required complete. (Sample to be approved by EIC) |
| 19 | Providing, fixing and applying Plaster of Paris (POP) false ceiling in required design and pattern consisting of frame work made with M.S/ G.I tubes, suspended/ supported from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required Including providing and fixing wire/ chicken mesh fixed and applying POP to the expanded metal of thickness complete as per directions of EIC |
| 20 | GI Metal Ceiling Lay in plain Tegular edge Global white/Off white colour tiles of size 595x595 mm, and 0.5 mm thick; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) |
| 21 | Wall painting with plastic emulsion paint (two or more coats) of approved brand and manufacture to give an even shade. New work |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on old wood work/plastered surface including sand papering and knotting |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new wood work/plastered surface including sand papering, knotting and a coat of primer complete |
| 24 | Providing and fixing 1st quality ceramic glazed Digital tiles of size 300x600mm with 4-5mm spacers and grouting the same with epoxy of required color andd conforming to IS: 13753 of minimum thickness 5mm of approved make in all colors, shades, except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, riser of steps and dados over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. (Sample to be approved by EIC) |
| 25 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering. All work up to all levels. 1:2:4 (1Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal Size) Crushed |
| 26 | Providing and fixing 1st quality vitrified non polished floor tiles 600x600mm (thickness to be specified by the manufacturer) with 4-5mm spacers and grouting the same with epoxy of required color of 1st quality conforming of IS :13755 in all colors, such as white, Ivory, Grey, Fume Red Brown or as approved by Engineer In Charge over 20mm thick bed of cement mortar 1:4 (1 Cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete (Sample to be approved by EIC) |
| 27 | Providing and fixing 18mm thick mirror polished, machine cut for floors, kitchen platform, vanity counters facieses and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. including moulding on outer edges complete at all levels. Black or as approved by EIC |
| 28 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain Polypropylene random fittings, (including necessary PPR reducers) etc. This includes testing of joints complete as per direction of Engineer incharge.Internal work Concealed fixing the pipe etc. (Sample to be approved by the EIC) |
| 29 | Internal work Concealed fixing the pipe ......etc. PN-16 pipe , 25mm OD |
| 30 | External work etc. PN-16 pipe , 32mm OD |
| 31 | Providing and fixing of PPR Male/ Female Adaptors (All types like elbows, tees etc) (Sample to be approved by EIC) for 25mm dia. |
| 32 | Providing and fixing of C.P grating 100mm size. ISI |
| 33 | Providing and fixing of PVC pipe (Type \\"B\\") in proper gradient in trenches if requiredd including jointing and refilling the excavated material complete including cost of excavation wherever required. (Sample to be approved by EIC) |
| 34 | 100mm |
| 35 | Providing and fixing of the following PVC fittings. (Sample to be approved by EIC) |
| 36 | Collar |
| 37 | 4\\" plain bend |
| 38 | floor trap |
| 39 | Door tee/ bend 4\\" |
| 40 | Providing and fixing 4\\"x3\\" reducer and 3\\" Cowl |
| 41 | Engagement of plumber for removing of of old Gi pipes,Pvc pipes, cp fittings and removing and refixing of geyser,etc complete as per EIC directions. |
| 42 | Engagement of Labour for shifting of tables,chairs, removing of stationary etc as per the directions of EIC |
| 43 | Engagement of Hilti for cutting slab, making of holes in walls etc |
| 44 | Engagement of Carpenter for easing of doors and windows and other works. |
| 45 | Construction of platform for W.C. with brick masonry in cement mortar 1:6 mix. Including filling of sand and providing of 15mm cement plaster in 1:4 mix. |
| 46 | Providing and fixing of water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confirming to I.S. 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White vitreous china long pan pattern W, C. pan of size 580mm with integral type foot rests. (Jaquar/ Hindware/ Cera or equivalent) |
| 47 | Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. (Depth as per site requirement).Size 45 x 45 cm including RCC/PVC unbreakable manhole cover with frame of size 45x45mm size/ Concrete Slab. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects Please Enable Macros to View BoQ information |
| 48 | Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. (Depth as per site requirement).Size 45 x 45 cm including RCC/PVC unbreakable manhole cover with frame of size 45x45mm size/ Concrete Slab. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects Please Enable Macros to View BoQ information |
