|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 moutside the periphery of the area cleared. |
| 2 | Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required (metre depth 20% ) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 4 | 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) |
| 5 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) |
| 6 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 7 | Lettering with black Japan paint of approved brand and manufacture |
| 8 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 9 | Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 10 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 11 | Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 13 | Supplying and filling builiding rubbish by mechanical transport i/c loading, unloading and consolidating the same with road roller of 6 tonne capacity in layer not exceeding 20cm in depth by ramming and watering for all leads and lifts etc. complete and as per direction of Engineer-in charge. |
| 14 | Hiring of JCB for spreading Malba, C&D waste and other activities etc. all complete as per the direction of Engineer - in -charge |
| 15 | Correction factor on existing items of the DSR-2023 i.e. 0.973 (Or Less 2.7%) |
| 16 | Add 3% Enhancement on DSR-2023 items Please Enable Macros to View BoQ information |
