Name of Work:- Renovation of crew rest room in Ondiputhur 1 branch
Sl. No.
Item Description
1
Supplying PAINTING ONE Coat in the best approved first quality of plastic emulsion paint in the wall over one primary coat of wall primer including cost of paint and other materials, brushes, scaffolding charges etc., including clearing the existing surface by manual labour etc., complete complying as directed by the departmental officers as per standard spefication
2
Painting TWO COATS for old wall surface using enamel paint of approved quality and colour over a priming coat withapproved quality of primer in all floors. The rate is inclusive of cost of all materials , labour charges,brushes and scaffolding charges etc.,complete complying with standard specification .( The paint should be got approval from the officer before us
3
FLOORING with Double charged nano VERTIFIED TILES of approved quality and colour of size 600x600x8 mm in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments complete complying with standard specification.
4
Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all cirner hoints mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforcemnet with a thickness of 1mm to have dimensional stability. The sash should be of 60x74mm. The profiles should have co-extruded seals. Hardware: all the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass/6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly tot he plastered brick wall using self expanding nylon plug and driving MS electroplated screws into plug.
5
Supplying and fixing UPVC windows and casement type (open) from the profile the size of outer frame 60mm x 58mm and the shutter profile are reinforcement with GI /1mm 125GSM and 100% corrosion free, the profiles are multi chambered section wall thick of 2mm. The EPDM rubber (Black colour) covered with over all the edges of frames and shutter the shutter will be provided with ESpag multi unit power locks also operate it as handle. The corners and joints should be welded and cleaned. Radiation free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow laekage of water even atmost ranging stroms and should has key lockable action , security protective hinges, strong locking system and as per size for arresting noise and energy loss. The connecting mechanism betwenn sash and outer frame that enables the opening of the windows. The windows should be fixed to the wall with 100% packing with screw and silicon packing all round the frames. The windows should be got approved from the executive engineer before use on work.
6
Supplying and fixing of window screen arrangement including 1\\" pipe screen pipe, cloth, side doom etc complete as per instruction of our corporation officers.
7
Supplying and fixing AIR CONDITIONER , stebilizer, double pole MCB with bo x, single pole MCB with box 20 Amps , 3cor 2.50 sq.mm cable wire, 4x10 Sq.mm Alu . Cable, 63Amps TPN MAIN SWITCH ( LT/ LK make) with main switch etc., complete.as per specification . Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
