|
| 1 | Item Rate BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: The Executive Engineer / Chennai Division -I Name of Work: Annual Maintenance works to TNUSRB office building in old COP campus, Egmore in Chennai city for the Period from 01.06.2026 to 31.03.2027. Contract No: DB/Ch.I/6507/2025 Bidder Name : BOOKLET - 4TENDER CODING SHEET ( BOQ) CONTAINS : 21 Pages( RATES TO BE FILLED UP BY THE TENDERER IN THIS CODING SHEET )SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make Qty Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against 1 No Item Quoted Currency in INR / Other Currency Rate exclusive of GST in Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Rate exclusive of GST in words AMOUNT Rs. P. AMOUNT Rs. P. TOTAL AMOUNT In Words |
| 2 | Labour charges for engaging Electrician grade-I for the period from 01.06.2026 to 31.03.2027 |
| 3 | Labour charges for engaging Plumber grade-I for the period from 01.06.2026 to 31.03.2027 |
| 4 | Labour charges for engaging Carpenter - II for the period from 01.06.2026 to 31.03.2027 |
| 5 | Labour charges for engaging scanvangers Mazdoor-I for the period from 01.06.2026 to 31.03.2027 |
| 6 | Supply and delivery of following of water supply and sanitary fittings of approved make (ISI) a. PVC low level flusing tank with all internal fittings (wall mounting type) white -10litre capcity |
| 7 | b. EWC seat cover |
| 8 | c. 15mm dia CP angle cock |
| 9 | e. Waste hose 1' 1/4\\" (32mm) |
| 10 | f. connection hose |
| 11 | g. CP shower arm with overhead shower rose |
| 12 | h. Stainless steel swan neck tap |
| 13 | i. 32mm dia 'B' class GI waste pipe |
| 14 | j) stainless steel health faucet |
| 15 | k. Brass chomium plated piller tap (heavy type)15/12mm dia |
| 16 | l. 15mm dia stainless steel long body tap (heavy duty) |
| 17 | m. CP two way bib cock with health faucet |
| 18 | o. Special type Mirror of size 1000x780mm |
| 19 | n. Special type Mirror of size 600x450mm |
| 20 | p. Supply of lipped mouth Porcelain Flat Back urinal superior variety approved brand |
| 21 | q. porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm |
| 22 | r. Stainless steel towel rack 600mm long with lower hanger |
| 23 | s. CI Grating-100mm dia |
| 24 | t. UPVC Ball valve 50mm dia |
| 25 | u. 50mm dia UPVC coupler |
| 26 | v. Waste coupling brass |
| 27 | Supplying, laying, fixing and jointing the 50mm dia UPVC pipes (above ground level ) |
| 28 | Supply and fixing of 120W LED street light fitting with LED of approved brand |
| 29 | Supply and fixing of 40w LED 4000K 2 x2 square type recessed fittings with LED (Higher end) |
| 30 | Supplying and delivery of the following electrical fittings of approved make ISI a. 24W LED 4000K 2x2 square type recessed fittings with LED |
| 31 | b. Supplying and delivery of 15 Amps 3 pin flush type plug socket |
| 32 | c. Supply and fixing of LED 7W/9W Bulb |
| 33 | d. Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable (Open wiring) |
| 34 | e. 225mm(9\\") sweep AC Exhaust fan (Light duty) |
| 35 | f. stepped Electronic 300 W / 450W square type fan regulator |
| 36 | g. 4' 18w crystal glass LED tube light fittings |
| 37 | h. 18w LED 3000k round type recessed fittings |
| 38 | Removing the existing ceiling fan of 48\\" dia sweep and removing the wornout coil and rewinding with new copper coil |
| 39 | Cleaning the existing RCC 25000 litre sump/ RCC over head water tank using cleaning beaching powder, |
| 40 | Cleaning the existing 5000 liters capacity cylindrical HDPE / PVC over head water tanks 2 nos without affecting the adjustant structures |
| 41 | Supply of Hydraulic Door Closer of various sizes of approved quality |
| 42 | Supplying and delivery of the following electrical fittings of approved make ISIa. 20Amps MC plug with 3 pin top |
| 43 | b. 40A, 30MA 4P RCCB/ELCB |
| 44 | c. 40A, DP MCB isolator |
| 45 | d. 63A, 4P 10KA MCB isolator |
| 46 | e. 100A, 4 P MCB isolator |
| 47 | f. swiches 5 Amps flush type |
| 48 | g. socket 5 Amps 3 pin 2 pin combined flush type wall socket |
| 49 | h. PVC insulation tape (19mm) |
| 50 | i) Rotary handle for 250A / 125A |
| 51 | j. 250 Amps three phase 4 pole change over switch |
| 52 | k) 250 A 4 pole MCCB |
| 53 | l) 250 Amps HRC fuse unit |
| 54 | m) 48W LED street light fitting with LED (Higher end) |
| 55 | n) single pole 6A to 32A, 10 KA (legared/ Hager/ Equivalent make) |
| 56 | o. 125 Amps 4 pole MCCB |
| 57 | Supply and delivery of following furniture fittings for replacing the damaged furniture fittings with ISI approved a. Aluminium door stopper with rubber bush with required screws |
| 58 | b. Tower bolts (with required screws) 150mm long and 12mm dia |
| 59 | c. Aldrop - 200mm long and 12mm dia with required screws, bolts and nuts |
| 60 | d. Handles \\"D\\" type of 150mm long with requied screws |
| 61 | e. 125mm x 30mm butt hinges with nyon washer of various sizes of length and width (with required screws) |
| 62 | f. 100mm x 30mm butt hinges with nyon washer of various sizes of length and width (with required screws) |
| 63 | g. Imax casement window hinges |
| 64 | h. Polished rectangular Acrylic Transparent covid sheet, thickness 5.0mm for windows |
| 65 | Supplying and fixing of 4mm thick pin headed Glass panels with aluminium anodised ‘U’ shape beeding |
| 66 | Supply of PVC Roller for Sliding Windows |
| 67 | Supply of Hydraulic Floor springs of various sizes double action hydraulic floor spring |
| 68 | Suuply of Mortice Lock-(Godrej or equivalent) with required screws with 3 Keys With night latch |
| 69 | Supply and delivery at site and fixing of SFRC cover slab with frame with locking arrangement a. 60x60 cm |
| 70 | Supply and delivery of direct online three phase panel board - DOL with two level guard and auto starter.5 HP |
| 71 | Supplying and laying of 3 core 4 sqmm PVC insulated and sheathed flat type copper L.T. cable conforming to IS 694/1990 with ISI |
| 72 | Labour Charges for removal of Submersible pumpest up to 5HP |
| 73 | Removing the motor coil for the existing Submersible plumpest of 5HP including removing coil and rewinding of worn out with new copper wire, |
| 74 | Labour Charges for re-erection of Submersible plumpest in bore well/Open wellup to 5Hp |
| 75 | Conveyance of power pumpset (centrifugal, jet and submersible) and its accessories from divisional stores to site of works. |
| 76 | Painting the old wood work with two coats of approved Ist class synthetic enamel paint |
| 77 | Painting the old walls with one coat of first class ready mixed plastic emulsion paint |
| 78 | Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade 'P' or 'S' trap |
| 79 | Supply and delivery of following Electric Ceiling fan with ISI mark with a) 48\\" 1200 sweep ceiling fan 5 star rated (Higher end) |
| 80 | Providing and filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles. |
| 81 | UPVC Window Specification: Supplying and fixing UPVC (Un -Plasticized Polyvinyl Chloride) Windows of casement type (open) from |
| 82 | Supplying and fixing of single leaf Soild core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989, a. 1000x 2400mm Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
