|
| 1 | M&L for one coat of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed. |
| 2 | M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 3 | M&L preparation of old decorated surfaces & applying one coat of oil bound distemper on ceiling complete all as specified and directed. |
| 4 | M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and directed. |
| 5 | M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of white putty and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 6 | M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 7 | M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of white putty and applying one coat of primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 8 | M&L for applying two coat interior 100% anti fungal acrylic smooth emulsion with silicon additives on old plastered surfaces that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 9 | M&L for preparing of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints all as specified & directed by the Engr-in-Charge. |
| 10 | M&L for preparing of old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified & directed. |
| 11 | M&L for preparing of old AC sheet surface by brooming down with steel wire brushing and washing with water and applying one coat of acyralic emulusion exterior paint any colour, complete all as specified and directed. |
| 12 | Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete. |
| 13 | M&L repair to corroded conc surface as in chajja and ceiling or similar surface after taking down,cleaning and preparation of surface,and apply Dr fixit Lates 302 as per mfg inst up to 50 mm thick and then apply plaster in CM 1:4 15 mm thick complete all as specified and directed. |
| 14 | M&L applying one coat of smart care damp gard block 2K of make:-Asian paints/Dr Fixit or equivalent as approved bt GE on brick/conc/plasterd surface as per mfg inst complete all as specified and directed. |
| 15 | M&L for Rendering 15 mm thick in ready mixed cement water 1:4 on fair faces of brick masonry or concrete surfaces of wall upto 3 story height mixed with water proffing compound (ISI Marked) @3% by weight of cement or as per manufacture insturctions, finished even and fair complete all as specified and directed after applying one coat of smart care damp guard /block 2K of make : - Asian paints/ Dr Fixit or equivalent as approved by GE. |
| 16 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (with out using extra cement). |
| 17 | M&L 5 mm thick plastering on ceiling in CM (1:4) even and smooth without using extra cement after applying of a coat of pidicrete mixed with cement. Note : - Dubbing of cement plater where reqd in two or three layer of 20 mm thick will be includued in the cost. |
| 18 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 19 | M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed. |
| 20 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed. |
| 21 | M&L for preparation of new plastered surfaces of walls and applying two coat of exterior weather proof anti fungal/anti dust paint including two coat of white putty and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 22 | M&L for preparation of new plastered surfaces of walls and applying two coat of interior premium quality acrylic emulsion paint including two coat of white putty and applying one coat of interior water based primer smooth emulsion with silicon additives on new plastered surfaces that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 23 | M&L applying two coat of smart wall care wall putty on intrenal or external surfaces of wall including complete removal of existing treated surfaces of wall complete all as specified and as directed. |
| 24 | The following Notes for internal and external wall finishes and painting :-(a) The work pertaining to periodical services and water proofing shall be executed from authorised applicator through manufacturer of which the materials i.e Paint, Distermper, Cement base paint, Putty etc is proposed to be used by the contractor and approved by Garrison Engineer.(b) The contractor shall upload along with the documents under cover-1 \\" Memorandum of Understanding (MOU) with only one manufacturer in the contract, failing which the bid shall be liable to be rejected\\". Make Apex Ultima/Berger weather coat glow or equivalent as approved by GE.(c) Contractor shall use mechanized sanding tools for complete removal and surface preparation by Air Spray machine Trucare-graco-utramax-490-pc-pro approved by Engr-in-Charge.(d) The contractor shall first prepare Sample Quarter for entire CA by doing in presence of company Rep and approver by GE. Please Enable Macros to View BoQ information |
| 25 | The following Notes for internal and external wall finishes and painting :-(a) The work pertaining to periodical services and water proofing shall be executed from authorised applicator through manufacturer of which the materials i.e Paint, Distermper, Cement base paint, Putty etc is proposed to be used by the contractor and approved by Garrison Engineer.(b) The contractor shall upload along with the documents under cover-1 \\" Memorandum of Understanding (MOU) with only one manufacturer in the contract, failing which the bid shall be liable to be rejected\\". Make Apex Ultima/Berger weather coat glow or equivalent as approved by GE.(c) Contractor shall use mechanized sanding tools for complete removal and surface preparation by Air Spray machine Trucare-graco-utramax-490-pc-pro approved by Engr-in-Charge.(d) The contractor shall first prepare Sample Quarter for entire CA by doing in presence of company Rep and approver by GE. Please Enable Macros to View BoQ information |
