|
| 1 | Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed. |
| 2 | M&L for Vitrified colour Ceramic joint free tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.complete all as specified and directed. |
| 3 | M&L for Vitrified colour joint free ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm in skirting/vertical surface etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed. |
| 4 | M&L for 7 to 8 mm thick non skid ceramic coloured joint free tiles (Premium quality) (squre/ rectangular) area of each tiles exc 0.18 sqm but n. exc 0.38 sqm in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match the tiles etc complete all as specified and directed. |
| 5 | All as per item no.4 but in skirting over 10 mm thick 1:4 CM plaster etc complete all as specified & directed. |
| 6 | M&L for 7 to 8 mm thick non skid ceramic coloured tiles joint free (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6.complete all as specified and directed. |
| 7 | M&L for Coloured Glazed ceramic tiles 450x350x7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed. |
| 8 | Dismantling stone slabs of any description or thickness in floors / dados, etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 9 | M&L Granite 20 mm thick in steps, pillars, window cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rounding edges of stone slab one edge and including 20 mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and as directed. |
| 10 | M&L for machine cut Kota stone slab flooring 20-22mm thick over 15mm thick screed bed in CM 1:6. laid and jointed with grey cement slurry mixed with match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 11 | M&L for kota stone slab 20-22 thick in riser of steps, skirting, dado and pillar laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 12 | All as per item ser No. 10 but except stone (Stone reused obtained from respective BOQ items) |
| 13 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 14 | M&L for chequered cement concrete tile 25cmx25cmx20mm thick set and jointed with gray pigment cement and pigment laid on cement mortar over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 15 | M&L for 100 mm thick Cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing finishing surface even and rough using broomfinish complete all as specified and directed. |
| 16 | M&L for Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed. |
| 17 | Taking down cement / lime plaster, and any kind wall cladding tiles/brick stone of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for kay, scrubbing down with water complete all as specified and directed. |
| 18 | M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for 15mm thick plastering in CM 1:4 on brick surfaces of walls & finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 20 | M&L for washed stone grit plaster on exterior walls in two layers , under layer 12mm th cement plaster 1:4 ( 1 cemant : 4 coarse sand ) furrowing the under layer with scratching tool , applying cement slurry on the under layer @ 3 Kg of cement per sqm , top layer 15 mm th cement plaster 1 :1 / 2 :2 ( 1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size ) in panels with groove all arround as per approved pattern incl. scrubbing and washing the top layer with brushes and water to expose the stone shipping complete all as specified and directed. |
| 21 | Forming groove of uniform size 15 mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens nailed to the under layer incl. removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified & directed. |
| 22 | Material & labour 5mm thick rendering in CM 1:3 concrete surfaces of ceiling etc, finished surfaced even & smooth without using extra cement complete all as specified & directed. |
| 23 | M&L for cement concrete 1:5:10 type E2 (40 mm graded stone aggregate) as in foundation filling and mass concrete or sunken etc complete all as specified and as directed. |
| 24 | M&L for 15mm thick plastering in CM 1:4 on floor with WPC on concrete surfaces of finishing the surface even & smooth complete all incl water proofing compound @ 3% by weight of cement or complete all as specified and directed. |
| 25 | M& L for cement concrete padding 1:2:4 type B0 (12.50 mm graded stone aggregate ) 40 mm thick in sunken of bath /toilet /Kitchen etc with and including WPC @ 3% by weight of cement or as per manufacture's instruction complete all as specified and directed. |
| 26 | M&L for applying in sunken portion two component elastomeric acrylic polymer modified cementitious waterproofing coating,smart damp block 2k suprema or approved equivalent,having 100% elongation as per ASTM D412.resisting 5 bars hydrostatic pressure as DIN 1048,reduction to rapid chloride shall be 70 as per have food grade certificate from laboratories like CFTRI coverage is 1.5 kg/sqm the mixing ratio of the coating shall be 2 parts of powder & I part of liquid without any water addition in the mixing etc complete as per manufactures specifications. |
| 27 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed. |
| 28 | S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification and drawing complete all as specified & directed. |
| 29 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 30 | S&F 75 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed. |
| 31 | S & F 150mm long aluminium handles, cast type, anodised complete all as specified and as directed. |
| 32 | S & F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 33 | Taking up or down 15 mm bore steel tubing/CPVC pipe including fittings and connections, including cleaning for Refixing or removal to store complete all as specified and directed. |
| 34 | S&F 15 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 35 | Taking up or down 20 mm bore steel tubing/ PPR pipe including fitting and connections, including cleaning for Refixing or removal to store complete all as specified and directed. |
| 36 | S&F 20 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 37 | Cutting Chases, pinning in brick/Concreate wall making good to facing where required and pointing in cement mortar 1:3 ends of edges of landing, steps cills sunshade shelves lintles etc and cutting chase for concealed water tubing or or concealed conduit wiring. etc and making good cutting N. exceeding 10 CM girth complete all as specified and directed. |
| 38 | Supply only Water Proofing Compound all as specified & directed. |
| 39 | Disconnecting existing water storage tanks 500 ltrs to 1000 ltrs capacity, setting aside (for lowering if required) for repair,cleaning ,etc and hosting if required reconnecting and refixing in position including cleaning, removing all scale dirt etc form tanks and from mouths of circulating pipe, repalcement old tank nipple, unions, stop cock, tank cover etc complete all as specified and as directed. |
| 40 | Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 41 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 42 | Dittto all as item no 27 above but except bricks complete all as specified and directed. Note:- Bricks obtained from item No 26 shall be reused after cleaning. |
| 43 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 44 | Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) built in cement mortar complete all as specified and directed. |
| 45 | M&L 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 46 | M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. |
| 47 | M&L for Reinforcement cement concrete (Nominal Mix) 1:2:4 type-B-1(using 20mm stone aggregrate ) as in slab supported on wall for wash hand complete all as specified and directed |
| 48 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work and fair finished surface not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 49 | M & L for Mild steel TMT 6mm to 8 mm dia over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 50 | M & L for two coat of cement base paint over a coat of primer on new plastered surfaces of wall including preparation of surfaces complete all as specified and directed. |
| 51 | Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash to match the existing as required, complete all as specified & directed. |
| 52 | Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper complete all as specified and directed. |
| 53 | Material and labour for preparation of newly plastered wall surface and applying two coats white wash complete all as specified and directed. |
| 54 | Dismntling wall and ceiling board or insulation board /slabs/blanket any thickness including cover fillets etc all as specified and directed. |
| 55 | S&F 605x605mm snap grid of powder coated galvanized iron of angle of size 23mm x 23mm of 30 gauge (Perimeter), T section of size 23mm x35mm main and 23mm x 27 mm (intermediate) of 30 gauge suitable for false ceiling including GI wire 2 mm thick @ 1200 mm centre to ceter both ways for hanging arragement coplete all as specified and directed |
| 56 | M&L for 4mm thick non asbestos fibre cement building board designer as in ceiling (flat or slopping) of size 600 x 600mm fixed to GI snap grid frame work complete all as specified & directed. |
| 57 | S & F in repair for 500 Litres capacity rotational moulded poly ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I with & including PVC Float valve 20mm bore, Tank cover, wash out and overflow pipe necessary tank nipples, after Dismantling existing tanks from roof slab/ staging of single/double storey bldg, lowering, complete all as specified and as directed. |
| 58 | S & F in repair for 1000 Litres capacity rotational moulded poly ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I with & including PVC float valve 20mm bore, tank cover, wash out pipe, overflow pipe, tank nipple,after Dismantling existing tanks from roof slab/ staging of single/double storey bldg, lowering, complete all as specified and as directed. |
| 59 | S&F in repairs 600 x 450 mm bevelled edge mirror of selected quality glass 5 mm thick mounted on 6 mm thick commercial ply wood aluminium frame and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 60 | S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including brackets , CP waste coupling and 32 mm pvc flexible waste pipe 800 mm long etc complete all as specified and directed. |
| 61 | S&F in repair Pillar taps cast copper alloy with capstan heads chromium plated scrwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia iron pipe complete all as specified and directed. |
| 62 | S&F in repairs 15mm bore CP stop cock/angle cock, cast copper alloy fancy type, screwed down high pressure, screwed for iron pipe or for unions and fixed complete all as specified and directed. |
| 63 | S&F in repair bib taps cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed. |
| 64 | Supply and fix in repair for 15mm Bib Cock (PTMT) , screwed for steel pipes, fixed in repairs, complete all as specified and directed |
| 65 | Supply and fix in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms)), complete all as specified and directed. |
| 66 | S&F in repairs 10litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & taking out of old unserviceable connections etc, connecting up new and making good disturbe portion complete all as specified and directed. |
| 67 | S & F in repairs, CP Waste coupling (half or full threaded) 40 mm dia of discharge pipe suitable for stainless steel sink complete all as specified and directed. |
| 68 | S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 69 | Supply & fixing in repair CP tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed. |
| 70 | S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 71 | S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with CI 'P' or 'S' trap, integral foot rests including flush pipe, trap, lime concrete bedding inlcuding taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturbe portion complete all as specified and directed. |
| 72 | S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with CI 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flusingh cistern ) and making good to disturbed surface of floor all fixed as in repair all as specified and directed. |
| 73 | S & F in repair of plastic wc seat cover and mild steel chromium plated or aluminised hinging device as etc complete all as specified and directed. |
| 74 | S & F in repairs health faucet (ABS body) mild steel Chcomium Plated suitable for 15mm dia pipe 1.25m long flexible tube and ABS wall hook including making connection and fixed in position for pedestal pattern WC incl. complete all as specified and drected. |
| 75 | S&F in repairs CP Soap dish 100mm dia fixed with cp screws etc complete all as specified and directed. |
| 76 | S&F in repair grating doom round with waste hole/ without hole, 125mm size of PTMT, (min weight 40 gms) complete all as specified and directed. |
| 77 | S&F in repair grating doom round with waste hole/ without hole, 100mm size of PTMT, (min weight 25 gms) complete all as specified and directed. |
| 78 | S & F in repair 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls, including all fittings like PVC bend , Tee etc complete all as specified and directed. |
| 79 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including all necessary fittings like PVC bend, Tee etc and taking down old unsv rainwater pipes complete all as specified and as directed. |
| 80 | S&F in clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 100 mm bore pipe complete all as specified & directed. |
| 81 | S&F in clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 75 mm bore pipe complete all as specified & directed. |
| 82 | S & F in repair Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed |
| 83 | S&F in repair drapery (curtain) rod 25mm dia Stainless steel grade 304 , side cups including fixing arrangement with drilling holes in walls brackets etc complete approved quality and colour complete all as specified and directed. |
| 84 | Hacking out old broken glass (any thickness, size quality or description) from wooden or metal frames, glazed with putty or fixed with beads etc complete all as specified & as directed. |
| 85 | S&F 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed. |
| 86 | Dismantling of wooden wall panelling incl. frame and make good the surface etc all as specified and directed. |
| 87 | S&F solid PVC Wall Lining for wall panelling consisting of 5 mm thick wood grain printed colour PVC sheet inclusive fixing with all accessories at site as per specifications and drawing complete all as specified and directed. |
| 88 | M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specified & directed. |
| 89 | Removing or dismantling of damage / cracked/ concrete /loose concrete / plaster of celing/ wall/ chajja/ facia to expose the sound and hard concrete using a suitable mechanical device or by hammer and chisels etc complete all as specified & directed. |
| 90 | M&L for providing and applying on beam, col, ceilings surface by one part alkaline based material with corrosion inhibitors and dispersing agents for exposed steel surface after cleaning to loose scale or oxidized chips from bars, having bulk density 1.25. The material to be applied to the rusted metal with brush for complete wetting of rusted metal surface and allowed to react for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal / steel after about 5-7 days, before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth etc to make surface dust free complete all as specified and directed. |
| 91 | M & L for applying bonding agent for bonding old to new concrete surface likes chajja/ beams/ celings/ columns/ facia etc by high performance modified Styrene- Butadiene Rubber ( SBR ) base binder . Applying of binder is as 10 sqm/ per litr ( including necessary arrangements in multy storey bldgs up to height 7 mtr ) etc complete all as specified & directed. |
| 92 | M & L for applying 25 mm thick ( average ) smart care repair mortar ready to use single component polymer modified repair mortar for repair of RCC members likes beams, columns, chajja , facia , mortar having good compressive strength of not less than M-30 and shrinkage resistance, mixing as per manufacture instruction etc ( including necessary arrangements in multy storey bldgs up to height 7 mtr ) complete all as specified & directed. |
| 93 | S&F galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed. Please Enable Macros to View BoQ information |
