|
| 1 | Supplying M.S Gates / window grill to the required size as per EPM specification and approved design as directed by the officer in charge with cost of materials all cess labour T&P etc. Complete as per the direction of the Engineer-in-charge. (Excluding GST). |
| 2 | Supplying fitting and fixing of precoated Crill sheet semi glass of 1000mm width & total coated thickness .50mm in roof drilling hole in wind ties including fixing of ridges and valley s wind ties etc complete including cost of steel and nail fitting ,all taxes labour & T&P etc. complete . |
| 3 | Suplying fitting, fixing up window ( Sliding type ) made up aluminium section 9778 as windows frame section No. 4096, 9777 and 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting ,cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer in Charge. |
| 4 | Dismentalling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. complete. |
| 5 | Fly Ash Brick masonary with Flyash Bricks of 23cm.x 11cm.x 8cm. size having crushing strength not less than 75 Kg/Cm2 in cement mortar (1:6) in superstructure including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, taxes & royalties of all materials, labour with T&P etc. complete in all respect. |
| 6 | 12mm (1/2) thick cement plaster (1:6) finished smooth to outside/inside brick walls after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST) |
| 7 | 16 mm (5/8) thick cement plaster (1:6) finished smooth to inside surface of 9 thick brick walls/stone masonry after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST) |
| 8 | Providing fitting and fixing of ALLUMINIUM JALLY 3 x 3 as partition walling OEL aluminium anodized section no. 9210 and 9207 as single groove and double groove respectively and horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 3 x 3 aluminium jalli and jointing angle no. 1855 etc. with cost of all materials, labour, cess etc. complete. (excluding GST) |
| 9 | Supplying fitting and fixing of KADAPPA TILES (upto 0.10 sqm) in floors 600mm x 600mm of approved shade make confirming to IS 13755 and treads and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) |
| 10 | Supplying fitting and fixing GCI sheet in roof including fixing of ridges wind-ties J-Hooks GI limpet washers bolts and nuts drilling in wind-ties with all T&P etc . complete including cost of fittings AC sheets and all materials etc. complete.(excluding GST) |
| 11 | R.C.C. work (1:1.5:3) M-20 having minimum compressive strength in work test of 200kg/square meter in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and 516 using 12mm to 20mm size (20mm not to exceed 25%) hard black broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete, watering and curing for 4 weeks centring, shuttering and finishing the exposed surfaces smooth providing grooves to beads where necessary, providing drip cess and proper randy the joint with wall surface where necessary and providing fan hooks as per requirement and ceiling smooth to receive white washing or painting including cost, conveyance, royalties, of all materials and labour with T&P required for the work etc .complete in all respect but excluding cost of binding wire of 18 to 20 gauge and labour charges for straightening cutting bending binding and laying the grills and placing in proper position etc. complete as per specification and direction of the Engineer-in-charge. (excluding GST) Lintel |
| 12 | Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge. |
| 13 | Earthwork in excavation in foundation in all kinds of soil including hard moorum, stony earth mixed with boulders (except sheet rock and boulders requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from worksite with all leads and lifts including cost of all labour and T&P cess and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge.(excluding GST) |
| 14 | Filling in foundation and plinth with SAND well watered and rammed in 23.5 (9'') thick layers with all leads and lifts with cost conveyance, cess and royalities of materials and labour with T&P with cost, conveyance for the work etc. complete as directed by the engineer in charge (measurement will be taken on finished compacted section only) (Excluding GST). |
| 15 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3.2) size clean hard black broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6) thick to the required level ramming watering and curing etc. complete including cost conveyance and royalties of all materials and labour with T&P required for the work etc. complete including dewatering if required.(excluding GST) Please Enable Macros to View BoQ information |
