|
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of cement concrete in ground floor, paving nexc 15cm thick(below or above GL) complete all as specified and directed |
| 3 | M & L for 50mm thick PCC 1:3:6, type C-1, as in Plinth protection etc finished even & smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 meter and at change in direction complete all as specified & directed. |
| 4 | M&L providing cement concrete type B0, 1:2:4 (12.5mm aggregate) in in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, watertroughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed |
| 5 | M&L for PCC 1:5:10 type E2 (using 40mm graded aggregate) as in subbases/ sub floors/pavings etc. complete all as specified |
| 6 | Demolition of brick work, stone/boulder masonry built in cement mortar complete all specified and directed |
| 7 | M&L for brick work with sub class 'B' brick old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as spfd & directed. |
| 8 | M&L precast cement concrete block masonry with solid blocks of plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 9 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in C.M. 1:6, complete all as specified. |
| 10 | Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed. |
| 11 | M&L 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L Washed stone grit plaster of required color on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified. |
| 14 | M&L for Preparing new plastered wall surfaces and applying two coat of oil emulsion distemper over a coat of wall putty 1mm thick over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 15 | M&L for preparing newly plastered surface of wall apply two coat of cement base paint over a coat of primer complete all as specified and directed |
| 16 | M&L three coats of white wash on wall surfaces including preparation of new plastered surfaces complete all as specified and directed |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 18 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed |
| 19 | M&L for vitrified ceramic tiles/outdoor tiles 8-12mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in floor etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over and including screed bed or bedding layer of mortar CM (1:6) 15mm thick all as specified and directed |
| 20 | M&L for vitrified ceramic light shade tiles/outdoor tiles 8-12mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in skirting etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over and including 10 mm thick backing in CM (1:4) complete all as specified and directed |
| 21 | M&L for coloured glazed ceramic tiles in vertical surface, 350x250x7mm to 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick plaster in CM 1:4 complete all as spfd & directed. |
| 22 | M&L for Chequered coloured cement concrete tiles 30cm x 30 cm x 20-25 mm thick set, jointed and pointed in neat cement slurry with grey pigment cement and pigments in floor including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed |
| 23 | M&L Granite (of any type) tiles 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and as directed |
| 24 | Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 25 | Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 26 | Taking down shutter exc 1.0 sqm but n exc 2.00 sqm each complete all as specified and directed. |
| 27 | S&F for mild steel framed wk as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with & incl either hooks & hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and slides) & hanging, also fastening & fixing Fe-290, Gde-165 complete all as spfd & directed. |
| 28 | S&F 0.63 mm th Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as spfd & directed. |
| 29 | S&F 35 mm th Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 30 | M&L for 2nd class hardwood, 35 mm thick glazed and skeleton shutter, open rebated and prepared to receive glass, gauge, etc. divided into squares, with plain, chamfered or rounded , mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc; size of members of shutter as specified in SSR Part I, Section 8 clause 8.24(a); supplied and fitted to chowkhat complete all as specified and directed |
| 31 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door /window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 32 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 33 | S&F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded all as spfd and as directed. |
| 34 | All as per srl item 32 above but without glazing bar |
| 35 | S & F MS work as in window guard bars,holdfasts etc., plain, let in and fixed independently in wooden/steel frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed |
| 36 | S&F for powder coated anodised aluminium frame for doors, windows ventilator with one or more rebates including joining cleat for fixing etc , screws, hinges, brackets, dash fasteners/rawl plugs etc. complete all as specified and directed.complete all as specified and directed. |
| 37 | S&F powder coated aluminium door shutters, aluminium section weighing min. 0.55 Kg/m including necessary jointing cleats glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed |
| 38 | S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing min. 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed. |
| 39 | S&F 10 mm thick Toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes,necessary fittings/etching required. |
| 40 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 41 | S&F Door closer hydraulically regulated, designation No. 2,aluminium die cast body universal type complete all as specified and directed. |
| 42 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in doors 140mm long all as specified and as directed. |
| 43 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs. |
| 44 | S&F 4.80 mm thick sheet glass ordinary quality and glazing with oil putty/rubber packing in square exc .50 sqm in each panels complete all as specified and directed. |
| 45 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed. |
| 46 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 47 | S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 48 | S&F 100 mm mild steel but hinges medium weight, cold rolled complete all as specified and directed |
| 49 | S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed |
| 50 | S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed. |
| 51 | S&F150 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed |
| 52 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 53 | S&F 100 mm Mortice lock,vertical type,size 100 mm complete all as specified and directed. |
| 54 | S&F 100 mm Mild Steel barrel tower bolts, stove enameled, black with bright bolts complete all as specified and directed |
| 55 | S&F 150 mm Mild Steel barrel tower bolts, stove enameled, black with bright bolts complete all as specified and directed |
| 56 | S&F 250mm long Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed |
| 57 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 58 | Dismantling mild steel work of any description and in any position complete all as specified and as directed. |
| 59 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) including distance pieces, cleats etc. |
| 60 | Welded steel wire fabric supplied and fixed complete to wood or steel members weight not exceeding 4.00 kg per sqm complete all as specified and as directed. |
| 61 | S&F in repairs vitreous china wash basin, white flat back size 550X400mm, incl pedestal, 32mm size brass chromium plated waste fittings, waste pipe and brackets fixing in position complete all as specified and directed. |
| 62 | S&F in repairs vitreous china wash basin, rectangular or oval shaped with min . Size 550X400mm incl 32mm size brass chromium plated waste fittings, waste pipe fixing in slab/granite top incl necessary fixing arrangement complete all as specified and directed. |
| 63 | S&F in rep vitreous china squatting pan \\"Orissa pattern\\" size 580 mm x 440 mm white with integral foot rests, incl provn of lime concrete bedding complete all as spfd & directed. |
| 64 | S&F in repairs Vitreous China Wash down water closet EWC with plastic seat cover complete all as specified and as directed . |
| 65 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet one piece EWC any color closed pattern incl all necessary accessories incl flushing cistern etc. complete in all respect all as specified. |
| 66 | S&F in repairs sinks made of stainless steel 1 mm th kitchen or laboratory with plugs, washers & waste coupling, incl bedding in CM to dwarf wall or incl fixing cantilever brackets & connecting union to pipe over all size 495x420mm bowl size 410x330 mmx160 mm complete all as spfd & directed. |
| 67 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 68 | S&F in repairs PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc complete all as specified and directed |
| 69 | S&F in repairs Tubular towel rail brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 70 | S&F in repairs brass CP Towel Ring fixed with and including Chromium plated brass screws and cleats complete all as specified and directed |
| 71 | S&F in repairs15mm bore Chromium plated Bib taps fancy type, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified |
| 72 | S&F in repairs stop valve/angle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy screwed down for iron pipe and fixed etc complete all as specified and directed. |
| 73 | S&F in repairs Brass CP mixer fancy type for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 74 | S&F 15mm Pillar taps, cast copper alloy,fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as spfd & directed. |
| 75 | Supply only 15mm pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as spfd & directed. |
| 76 | S&F in repairs Stainless steel soap dish, any type fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 77 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified |
| 78 | S&F in repairs plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devise complete all as specified and directed. |
| 79 | M&L for 32mm in size Waste fittings, brass, chromium plated for stainless steel sinks, glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs complete all as specified and directed |
| 80 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm long fixed in repairs all as spfd and as directed. |
| 81 | S&F in repairs PVC waste pipe 32/40mm dia for wash basin/kitchen sink/urinals complete all as specified and as directed. |
| 82 | S&F in repairss 25 mm bore Ball valves heavy duty, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs all as specified and directed. |
| 83 | S&F in repairs 20 mm bore Ball valves heavy duty,high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs all as specified and directed. |
| 84 | S&F in repairs 15 mm bore Ball valves heavy duty,high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs all as specified and directed. |
| 85 | S&F swivel shower of PTMT any colour for fixing with 15mm pipe along with shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour, fixed in repairs complete all as spfd & directed |
| 86 | S&F in repairs shower concealed stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with long shank and capstan head for (Bath shower) screwed for iron pipe and fixed including making good existing surfaces complete all as specified and directed. |
| 87 | Supplying & laying in trenches/wall Polyethylene (PE-AL-PE) composite pressure pipes (Outside dia 16mm) including all Crimp type internal sealing Plastic-Metal Composite fittings (such as elbows, tees, reducers, etc.) complete fixed to wall or laid in floor etc including taking up or down 15 mm GI tubing complete all as spfd & directed |
| 88 | Supplying & laying in trenches/wall Polyethylene (PE-AL-PE) composite pressure pipes (Outside dia 20mm) including all Crimp type internal sealing Plastic-Metal Composite fittings (such as elbows, tees, reducers, etc.) complete fixed to wall or laid in floor etc including taking up or down 20 mm GI tubing complete all as spfd & directed |
| 89 | S&F 15 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking up or down 15 mm GI tubing complete all as spfd & directed |
| 90 | S&F 20 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking up or down 20 mm GI tubing complete all as spfd & directed |
| 91 | S&F in repair Health Faucet (ABS Body) MS, Chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 92 | S & F in repairs Harrison rails/curtain rods, mild steel, chromium plated with brackets, stops, rollers etc fancy type as approved complete all as specified and directed. |
| 93 | S&F in repairs 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as spfd & directed. |
| 94 | Supply and fix 2000 Ltr rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted & fixed in position including dismantling old water tank, complete all as specified and directed. |
| 95 | Supply and fix 1000 Ltr rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted & fixed in position including dismantling old water tank, complete all as specified and directed. |
| 96 | Supply and fix 500 Ltr rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted & fixed in position including dismantling old water tank complete all as specified and directed |
| 97 | Supply and fix 250 Ltr rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted & fixed in position including dismantling old water tank complete all as specified and directed |
| 98 | S&F 25 mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 99 | S&F 20 mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 100 | S&F15 mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 101 | S & F in repair mild steel lid/tank cover with hinges on one side & locking facility on another side/ or with thread secured with stainleess screws for water tank of capacity up to 1000ltrs complete all as specified and directed. |
| 102 | S&F in repairs 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 103 | S&F in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 104 | Supply and fix in repairs CP Wall Mixer with provision for Overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges for 15mm dia pipe complete all as specified and directed |
| 105 | Demolition and breaking up drain pipes 100 mm dia(Salt glazed ware, AC or reinforced concrete) set in cement mortar etc. complete all as specified and directed. |
| 106 | S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls or laid in floors including fixing complete all as specified and directed. |
| 107 | S&F 110 mm bore PVC(SWR) bend any radius complete all as specified and directed. |
| 108 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets,fittings etc. as specified and directed. |
| 109 | S&F False Ceiling Horizontal level regular edge grid 600 x 600 mm form work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as spfd and directed. |
| 110 | S&F 5 to 8mm thick PVC hollow type wall panelling any color fixed to wall/ceiling with L or U shaped beading at ends fixed with screws complete all as specified and as directed. |
| 111 | M&L for 18/19mm thickness Medium density fibre board,one side laminated other side balancing, exterior grade, fixed in repair to framework with screws etc |
| 112 | S&F Cabinet Hinges(Set of 2),Soft Close, Full Overlay 4 Hole, Nickel Plated for 14-20mm Thick shutter for wardrobe, kitchen, Bathroom etccomplete all as specified and directed. |
| 113 | S&F catch magnet for cupboard shutter complete all as specified and directed. |
| 114 | M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling and walling with screws to timber frame work complete all as sfd and directed. |
| 115 | M&L II nd class hard wood plain fillets square or rectangular in section clean sawn but bull nosed chamfered or rounded on one edge or face sectional area exc 3 sqcm and nexc 6 sqcm secured in nails complete all as specified and directed |
| 116 | Dismantling of timber scantling 40 sqcm and over in section in any position for unframed works complete all as specified and directed |
| 117 | M&L for 2nd class hard wood as in scantling clean sawn framed & fixed as in ceiling and walling wks, complete all spfd & directed. |
| 118 | Dismantling of timber scantling 40 Sqcm under in section in any position, fixed with nails unframed work complete all as spfd & directed. |
| 119 | M&L for II nd class hard wood plain fillets square or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed |
| 120 | M&L for one coat of creosote oil to wooden surfaces new or old of any description including preparation of surfaces complete all as specified and directed. |
| 121 | Dismantling of plain or corrugated steel sheeting of any gauge/thickness in roof covering/wall cladding complete all as spfd and directed |
| 122 | S&F 0.63 mm th galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type or cranked hook bolts fixed to roof covering/cladding to wall complete all as spfd & directed |
| 123 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 124 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 125 | M&L for two coat of synthetic enamel paint over a coat of pink primer to new/old wooden surface of any description exc 10 cm girth or width including preparation of new/old wooden surfaces complete all as specified and directed |
| 126 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as spfd and directed. |
| 127 | M&L for Preparing old surfaces, plastered or unplasterd old decorated wall surfaces and applying two coat of oil emulsion distemper over a coat of wall putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 128 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less that 50gm/liter and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter / 10 Sqm over and including priming coat of exterior primer applied @0.90 liter/10 Sqm over new surfaces over a coat of wall putty of 1mm thickness complete all as specified and directed. |
| 129 | M & L for one coat of white wash on old decorated wall surfaces including preparation all as specified and directed |
| 130 | M & L One coat of Oil bound distemper on old decorated wall surfaces including preparation all as specified and directed |
| 131 | M & L preparing old previously treated surfaces of steel surface as in corrugated/plain sheets as in roof covering /wall or other surfaces over 10 cm girth or width by cleaning straightening if any removing rust and making good where required and applying Two coat of synthetic enamel paint on old steel surfaces complete all as specified and directed. |
| 132 | Demolition reinforced cement concrete in any description and in any position complete all as specified and directed. |
| 133 | M&L Slabs supported on walls, beams and columns in floors, roofs, landings,balconies,canopies, deck slabs and in shelves and the like using cement concrete type B-0 1:2:4 complete all as specified and directed |
| 134 | S&F Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete complete all as specified and directed |
| 135 | M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed |
| 136 | S&F in repairss 15mm dia cast iron bib taps with forged brass stem & brass jumper valve, screwed for iron pipe and fixed all as specified and directed |
| 137 | Dismantling for Stone slabs and tiles/interlocking paver block of any description or thickness in floors, aprons etc laid dry or laid dry and pointed |
| 138 | M&L for Sand filling under floors or in foundations including watering and consolidation |
| 139 | M&L for Machine pressed precast concrete coloured interlocking paver block any shape, size & color (as approved) confirming to IS 15658-2006 of 80 mm thickness M-40 Grade fixed with grey cement and pigment |
| 140 | Taking down carefully unsv copper/aluminium point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sketch fitting etc removing materials to store for keeping in safe custody for taking credit complete all as specified and directed. Please Enable Macros to View BoQ information |
| 141 | Taking down carefully unsv copper/aluminium point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sketch fitting etc removing materials to store for keeping in safe custody for taking credit complete all as specified and directed. Please Enable Macros to View BoQ information |
