|
| 1 | CIVIL WORKS-RENOVATION |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood ) shutterincluding chowkhats, architrave, holdfasts etc. complete and stacking within 50metres lead:Of area 3 sq. metres and below |
| 3 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wallthickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred atcorners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. squaretube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. squaretube of 19 gauge, EPDM rubber gasket weather seal to be provided through out theframe. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size,complete as per manufacturer's specification and direction of Engineer-in Charge. |
| 4 | Providing and fixing factory made panel PVC door shutter consisting of frame madeout of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers ofapproved make and manufacture. M.S. frame covered with 5 mm thick heat mouldedPVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall beflat and 20 mm shall be tapered in 45 degree angle on both side forming styles and5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degreeon th inner side to form top and bottom rail and 115 mm wide PVC sheet out ofwhich 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail.Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2)thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottomrail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. framewelded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm widePVC sheet beading on inner side, and joined together with solvent cement adhesive.An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior sideof the 'C' Channel using PVC solvent adhesive etc. complete as per direction ofEngineer -in-charge, manufacture's specification & drawing.30 mm thick prelaminated PVC door shutters |
| 5 | Providing and fixing PVC handles of 102 mm, on PVC door with necessary screw |
| 6 | Providing and fixing of PVC tower bolt of 102 mm, with necessary screws |
| 7 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters andunder, including cutting the patch in proper shape, raking out joints and preparing andplastering the surface of the walls complete, including disposal of rubbish to thedumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : finesand) |
| 8 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer -inCharge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Grouting the joints of wall tiles having joints of 3 mm width, using epoxy grout mix0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg ofresin per kg). including filling /grouting and finishing complete as per direction ofEngineer-in-charge. Size of Tile 600x600 mm |
| 10 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy groutmix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kgof resin per kg). including filling /grouting and finishing complete as per direction ofEngineer-in-charge.Size of Tile 600x600 mm |
| 11 | Dismantling vinyl from wall, floor & skirting. Raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping ground within 50meters lead. |
| 12 | Providing and laying vitrified wall tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cementmortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1200x600 mm |
| 13 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structuralnon sag elastomeric PU sealant over backer rod of approved quality as perarchitectural drawings and direction of Engineer-in-charge complete,complying to ASTM C920, DIN 18540-F & ISO 11600Upto 10 mm depth and 10mm width |
| 14 | Providing and Laying antimicrobial vinyl flooring consisting of 3 mm thick vinylflooring with required colour and shade shall be fixed properly on the floor withoutbubbles, air gaps or wringles, and shall be pasted with approved quality adhesivescomplete in all respect as directed by Engineer in charge. The sheet shall be certifiedby ECHA, FDA, EPA and should contain silver phosphate glass antimicrobialtechnology to preserve and prevent degradation and prevent degradation caused bymicrobial growth. Manufactures has to produce a product warranty for 15 years |
| 15 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixingof repaired door shutters to existing door frames, including replacement of hingeswith screws, etc. as required, all complete as per the direction of the Engineer-incharge. |
| 16 | Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixing with dashfasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminnium snap beading forglazing /paneling, C.P. brass/ stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.(Glazing, paneling and dashfasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating50 micron) |
| 17 | For shutters of doors, windows & ventilators including providing and fixinghinges / pivots and making provision for fixing of fittings wherever requiredincluding the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paidfor separately)Powder coated aluminium (minimum thickness of powder coating 50micron) |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled andglazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebates to be measured), Panellingfor panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.0 mm thickglass panes (weight not less than 12.50 kg/sqm). |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation7.5 in superstructure above plinth level up to floor V level in all shapes and sizesin:Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 20 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, ofapproved brand and manufacturer, over the plastered wall surface to prepare thesurface even and smooth complete. |
| 22 | Applying one coat of water thinnable cement primer of approved brand andmanufacture on wall surface:Water thinnable cement primer |
| 23 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC(Volatile including applying additional coats wherever required to achieve even shadeand colour.One coat |
| 24 | Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mmthick, to frame, backing or studding with screws etc. complete (Frames, backing orstudding to be paid separately)as per the direction of site Engineer-in-charge |
| 25 | Stainless steel SS304 grade , Auto hinges , soft close , Rust proof cabinet hinges |
| 26 | Providing and fixing bright /matt finished Stainless Steel handles of approvedquality & make with necessary screws etc all complete.125 mm |
| 27 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or wastematerials by mechanical means, including loading, transporting, unloading toapproved municipal dumping ground or as approved by Engineer-in-charge, beyond50 m initial lead, for all leads including all lifts involved |
| 28 | Removing white or colour wash by scrapping and sand papering and preparing thesurface smooth including necessary repairs to scratches etc. complete. |
| 29 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC(Volatile including applying additional coats wherever required to achieve even shadeand colour.Two coats |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade:Two or more coats on new work |
| 31 | Melamine polishing on wood work (one or more coat) |
| 32 | Providing & Applying high quality acrylic modified resin based texture ofDholpur/ Red sand stone Pattern with anti algae and UV resistance properties to beapplied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of1- 1.5 mm thickness after scrapping and properly cleaning the surface to removeloose particles from the plaster surface, followed by top coating with PremiumAcrylic Smooth exterior paint with Silicone additives of required shade by two ormore coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge |
| 33 | Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixing with dashfasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminnium snap beading forglazing /paneling, C.P. brass/ stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.(Glazing, paneling and dashfasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating50 micron) |
| 34 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layeror graded wood particle board conforming to IS : 12823 Grade I Type II, in panellingfixed in aluminum doors, windows shutters and partition frames with C.P. brass /stainless steel screws etc. complete as per architectural drawings and directions ofEngineer - in- Charge.Pre- laminated particle board with decorative lamination onboth sides Please Enable Macros to View BoQ information |
