Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area 3 sqm and below. |
| 2 | Dismantling Aluminium / Gypsum partitions, doors, Windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. |
| 3 | Demolishing Brick work Manually / by mechanical means including stacking of Serviceable material and Disposal of Unserviceable material within 50 meters lead as per direction of Engineer-in-charge.in Cement mortar. |
| 4 | Demolishing R.C.C. work Manually / by mechanical means including stacking of Steel bars and Disposal of Unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 5 | Extra for Cutting Reinforcement bars Manually by mechanical means R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. |
| 7 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) |
| 11 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 12 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil , |
| 13 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil , |
| 14 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinthlevel :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) |
| 16 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 1).Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: 2).Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. 3).Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor. 4).Treatment of existing masonry using chemical emulsion@ one litre per hole at 300mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2(1 cement : 2 coarse sand) to the full depth of the hole. 5).Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150mm centre to centre and sealing the same. All with With chlorpyriphos/Lindane E.C. 20% with 1% concentration. |
| 17 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level,Concrete of M25 grade with minimum cement content of 330 kg /cum (For Lintel) |
| 18 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cum.Concrete of M25 grade with minimum cement contect of 300 kg/cum (For Foundation) |
| 19 | Add for using extra cement in the items of design mix over and above the specified cement content therein. |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 15 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 21 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 22 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approv quality using 1.7 kg per square metre on damp proof course after cleaning the surface w brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 23 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 24 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement 20 mm cement plaster |
| 25 | 12 mm Cement plaster of mix. 1:4 (1 cement: 4 course sand) |
| 26 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 27 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1) cement :5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deepThe whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. \\"All above operations to be done in order and as directed and specified by the Engineer-in-Charge\\"With average thickness of 120 mm and minimum thickness at khurra as 65 mm |
| 28 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 29 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns. |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form work for:Suspended floors, roofs, landings, balconies and access platform. |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts. |
| 32 | Centering and shuttering including strutting, propping etc. and removal of form work for:Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes. |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes. |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia Pipes. |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 40 mm nominal outer dia Pipes. |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 38 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm |
| 39 | Providing & Placing of Looking Mirror pasted on wall with the help of silicon having edges beveled, all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge. Customized |
| 40 | Providing & Fixing of Concealed Stop Cock With Trims as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 41 | Providing & Fixing of Floor Drainer as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 42 | Providing & Fixing of Wall hung Closet with Soft Close Seat Cover Fixed with Jumbo Bolts as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 43 | Providing and fixing Urinal With Sensor Make-Kerovit, as per the approved design all complete as per drawing, specification and direction of engineer incharge. |
| 44 | Providing and fixing Urinal Partition Make-Kerovit, as per the approved design all complete as per drawing, specification and direction of engineer incharge. |
| 45 | Providing & Fixing of Concealed Cistern With Push Plate as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 46 | Providing and fixing of Half/Full Pedestal Basin as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 47 | Providing & fixing of Single Lever Basin Mixer as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Jaquar/American Standard/Kerovit Eqivalent |
| 48 | Providing and fixing Sink Mixer as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 49 | Providing and fixing 2 Way Bib Tap as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 50 | Providing & fixing Health Faucet as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 51 | Providing and fixing of Angle Cock as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 52 | Providing and fixing of Toilet Paper Holder as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 53 | Providing and fixing of Towel Ring as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 54 | Providing and fixing of Soap Dispenser as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 55 | Providing and fixing of Waste Coupling as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent |
| 56 | Providing and fixing of 110mm dia pipe 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc. |
| 57 | Providing and fixing of 110mm dia Elbow 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc. |
| 58 | Providing and fixing of 110mm dia 45 Degree Elbow, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc. |
| 59 | Providing and fixing of 110mm dia Socket, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc. |
| 60 | Providing and fixing of 110mm dia Tee, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc. |
| 61 | Providing and fixing of 110x110mm dia Nahani Trap, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc. |
| 62 | Providing & Fixing of at all height false ceiling including providing and fixing of frame made of special section power pressed from m.s. sheet and galvonised in accordance with zinc coating of grade 350 as per IS 277 and consisting of angle cleat 25x1.6mm with flanges of 27mm and 37mm at 1200mm c/c one flanged fix to the ceiling with dash fastener 12.5mm dia and and 40mm long with 6mm dia bolt to the angle hangers of 25x25x0.55 mm of required lengthened other end of angle hanger being fixed with nut and bolts to GI channel 45x15x0.90mm running at the rate of 1200 mm c/c to with the ceiling section 0.5mm thick button wedges of 80mm with tappered flenges of 26 mm each having clips of 10.5mm.at 450mmc/ c shall be fixed in direction perpendicular to GI channels with connecting clips made out of 2.64MM diax230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimetre channels 0.50 mm thick 27mm high having flenges of 20mm and 30mm long ,perimeter of ceiling fixed to wall /partition with help of rawl plugs at 450mm c/c with 25 mm long drive all screws @230mm interval including jointing and fixing to a flush finish of tappered end sq edge of board with recommended filler jointing and tapper finisher and two coat of primer suitable for board as per manufacturers specification and also including the cost of making of openning for light fittings grills diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of engineer incharge but excluding the cost of painting. 12.50mm thick tapered edge gypsum board. |
| 63 | Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Dune (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 63%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 8.8 Kgs/M2 & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. ARMSTRONG SUSPENSION SYSTEM - Armstrong make Anchor Fastener, Hanger Wire 2.5mm dia, Hook Clip with J Wire assembly. Approved Makes - Armstrong, Shera, Nitco. |
| 64 | Providing & fixing Armstrong Vertical Linear Baffle Ceiling made out of GI Extrusion in GI alloy grade. The baffle blade shall be in size of 100x 25 x 3600mm. The baffle blade shall be suspended using Slotted U-profile at on-center spacing in multiples of 25mm. longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. Installation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter. as per the approved design all complete as per drawing, specification and direction of Architect/ Engineer -in-Charge. APPROVED MAKE - Armstrong/ HiSteel/Equivalent |
| 65 | Providing and fixing of 12 mm Thick Laminated wooden flooring range of Use 23/32 (Heavy Domestic/Domestic) with a Surface Abrasion Resistance of class AC3 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density > 850 Kg/M3) of plank size 1212 mm X 137 mm having Uni fit locking arrangement (lock strength > 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels, all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge. Make-Armstrong, Mikasa, Luxe, fcml Equivalent |
| 66 | Supply & fixing of first radiant/first line/Japan carpet tile tufted 1/10” loop carpet tile100% PA6 solution dyed aquation backing back to back modified bitumen, 10% recycled content included,fire resistant EN-1350-1B,,S1,pile height Ca2.9 mm, total weight ca 4300 gm/m2,pile densityca 0.114gm/cm3,thermal resistant ISO8302.0.047m2 K/W,impact noise rating ISO10140(1000Hz) tile size should be (500 cm X 500 cm) duly installed on smooth and hard surface with company recommended adhesive. |
| 67 | Providing and laying of Double Charged floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x1200mm |
| 68 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 69 | Grouting the joints of flooring tiles having joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. |
| 70 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm |
| 71 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 72 | Providing & Making & Fixing of Commercial Wall Panneling made with Aluminium Section of 2\\"x1\\" @ 2'CC frame work cladded with 12MM Ply complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 73 | Providing & Making & Fixing of Commercial Wall Partition made with Aluminium Section of 2\\"x1\\" @ 2'CC frame work cladded with 9MM Ply on Both Side complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 74 | Providing & Making & Fixing of Wall Panneling made with 1MM Laminate & 5.5MM MDF on Existing Surface complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 75 | Providing & Making & Fixing of Wall Panneling made with 4MM Veneer on Existing Surface complete with Water Base PU Polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 76 | Providing & Making & Fixing of Wall Panneling made with 12MM Louver on Existing Surface complete with Melamine Polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 77 | Providing & Making & Fixing of Wall Panneling made with Coloured Lacquered Glass on Existing Surface complete with Melamine Polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 78 | Providing & Fixing of 12MM Toughened Glass Door with all hardware as per design with edge polish m/c top & bottom pivot and bottom lock with handle all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 79 | Providing & Fixing 12MM Toughned Glass Partition Modi float glass fixed edge to edge as per design and drawing and polished where required along with neccesary hardware all complete as per drawing, specification and direction of engineer incharge. |
| 80 | Providing & fixing of 32MM Flush Door complete with all Fittings Like Hinges, Mortis lock, Door closer, Tower Bolt etc all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 81 | Providing & Fixing of Plotter Cutted Designer Film of approved shade as per drawing & specification as approved by Engineer -in-Charge. |
| 82 | Providing & Fixing of Plotter Cutted Designer Coloured Vinyl of approved shade as per drawing & specification as approved by Engineer -in-Charge. |
| 83 | Supply & Fixing of windows made from multi chambered UPVC profiles of minimum 60/108 mm thickness of (Wintech make or equivalent) in natural from stailized for heat, light, impact & UV radiation. The UPVC profiles should be reinforced with galzvanized steel profiles of designed thickness.Float glass of approved colour in 4/5/6/8 mm or as desired by the costumer shall be fixed with heveled beads. All openable / sliding sashes shall be having grey/black colored weather seal fitted in continuous lenghts made from bubble PTV Rubber & side Hung with 90L openin friction syats of rust proof stainless steel with provision of multipoint lockng system (casement only) made from Espag rods (coated steel) all handle shall be made from die Cast zinc alloy in white finish only as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. |
| 84 | Providing & Fixing of Translucent Zebra Blinds with Hand Rail of approved shade as per drawing & specification as approved by Engineer -in-Charge. |
| 85 | Providing & Fixxing of WPC Chaukat as per the approved design all complete as per drawing, specification and direction of engineer incharge |
| 86 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 87 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 88 | Providing & Fixing of Rectangular Shape Polmer Planter of Size (375Wx375Dx400HT\\") With Thermocol Packing & Double Layer of Pabbles With Artificial 36\\"Plants of approved shade as per drawing & specification as approved by Engineer -in-Charge. MR |
| 89 | Providing & Fixing of Round Shape Polmer Planter of Size (375DIA X 375HT\\") With Thermocol Packing & Double Layer of Pabbles With Artificial 36\\"Plants of approved shade as per drawing & specification as approved by Engineer -in-Charge. MR |
| 90 | Providing & Fixing of Rectangular Shape Polmer Planter of Size (600Wx325Dx375HT\\") With Thermocol Packing & Double Layer of Pabbles With Artificial 36\\"Plants of approved shade as per drawing & specification as approved by Engineer -in-Charge. MR |
| 91 | Providing & Fixing of Photo Frames of Different Sizes of Picture in Coloured/ Black & White Canvas Prints with wooden frame borders complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. |
| 92 | Providing & Fixing of Photo Frames Having Size (600WX600HT) of Paryatan Vibhag Prints with wooden frame borders & Non Reflective glass complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. |
| 93 | Providing & Fixing of Signages Made of Side Moulded Signages made with Premium Laminate & Acrylic Laser Cut Letters as per deisgn & Multi Layering with Wooden Finish as base of Male, Female Toilet & Pantry, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. |
| 94 | Providing & Fixing of Signages of Size (450 x 200)MM Made of Side Moulded Signages made with Premium Laminate & Acrylic Laser Cut Letters as per deisgn & Multi Layering with Wooden Finish as base of Conference Room, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. |
| 95 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A |
| 96 | Supply and fixing of Power point and Supply and fixing of power plug with 10 Amp./250 volt flush type modular switch and 5 pin 10A /250 volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour t&P etc. required for proper completion of work. |
| 97 | Supply and fixing of wire, Power point and Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 nA/250 volt flush typ[e universal modular socket switch on concealed M.S. box including supply of all material, labour t&P etc. required for proper completion of work. |
| 98 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 99 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 100 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire |
| 101 | Supplying & Drawing co-axial TV cable RG-6 grade, 0.7 mm. solid copper conductor, PE insulated] shielded with fine finned copper braid and protected with PVC sheath in the existing surface/ recessed steel/PVC conduit as required. For T.V. Socket outlet |
| 102 | Providing Drawing Connecting And Testing Of Enhanced Categoey 4 Pair Lan Local Area Network Cable 24 AWG Conductor Performance Specifide 5E U L and CUL Listed In Existing PVC Conduit .(CAT-6 Network Cable) |
| 103 | Supply & Fixing of following sizes of medium class PVC conduit alongwith accessories in sueface/recess including cutting the wall & making it good the same in case of recessed conduit as required. 20MM |
| 104 | Supply & Fixing of following sizes of medium class PVC conduit alongwith accessories in sueface/recess including cutting the wall & making it good the same in case of recessed conduit as required. 25MM |
| 105 | Supply & Fixing of following sizes of medium class PVC conduit alongwith accessories in sueface/recess including cutting the wall & making it good the same in case of recessed conduit as required. 32MM |
| 106 | Supplying & fixing of TV Antenna socket on Modular Plate & G.I Box including connections |
| 107 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 1 or 2 Module |
| 108 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 3 Module |
| 109 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 4 Module |
| 110 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 6 Module |
| 111 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 8 Module |
| 112 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 12 Module |
| 113 | Blank plate for modular plate type switch boards wherever required. |
| 114 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 115 | S&F of 125 Amp 4 pole MCCB (25 KA) Thermal Magnetic release |
| 116 | S & F surface/Flush mounting 12ways V TPN distribution board with additional metal door without MCCB complete in all respect, as directed at site by Engineer in charge. CAT-A |
| 117 | Supply and fixing of recess mounting round 15 TO 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT-AAA |
| 118 | Supply and fixing of 36 Watt to 46 Watt above 3300 leumin indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA |
| 119 | Supply and fixing of 400mm Wall Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent |
| 120 | Supply & Fixing of LED Profile Light all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent |
| 121 | Supply & Fixing of LED Profile Light Driver all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent |
| 122 | Supply and Fixing of Deep Recess Mounting round 10 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent |
| 123 | Providing & Fixing of 5KVA Online UPS Having 12V/26AH 15Nos Batteries & Battery Stand all complete as per drawing and specification and direction of engineer incharge. Make-Aeon |
| 124 | Providing & Fixing of Call Bell Chimes all complete as per drawing and specification and direction of engineer incharge. Make-L&T |
| 125 | Providing & Fixing of 1800MM Linear Hanging LED Light COB based all complete as per drawing and specification and direction of engineer incharge. Make-Ledlum |
| 126 | Providing & Fixing of 1200 MM Linear Hanging LED Light all complete as per drawing and specification and direction of engineer incharge. Make-Ledlum |
| 127 | S & F surface/Flush mounting 6 ways TPN distribution board with additional metal door without MCCB complete in all respect, as directed at site by Engineer in charge. CAT-A |
| 128 | S&F of 40 Amp 2 pole MCB (10 KA) Thermal Magnetic release |
| 129 | Providing & Fixing of Water Proof RCBO box with RCBO all complete as per drawing and specification and direction of engineer incharge. |
| 130 | Supply and Wiring with 10 SQMm, 4 core 2Xfy Copper Xlpe Insulated Armoured Str Frls Cable 1.1Kv complete in all respect. |
| 131 | Supply and Wiring with 6 SQMm, 4 core 2Xfy Copper Xlpe Insulated Armoured Str Frls Cable 1.1Kv complete in all respect. |
| 132 | Providing & Fixing of GI Earthing all complete as per drawing and specification and direction of engineer incharge. |
| 133 | Providing & Fixing of Copper Earthing all complete as per drawing and specification and direction of engineer incharge. |
| 134 | Supply and Wiring with 25 SQMm, 3.5 core aluminum Insulated Armoured Str Frls Cable 1.1Kv complete in all respect. |
| 135 | Supply and Wiring with 50 SQMm, 3.5 core aluminum Insulated Armoured Str Frls Cable 1.1Kv complete in all respect. |
| 136 | Providing & Making & Fixing of Executive Wooden Classic Table of Size (2400Lx1200Wx750HT) MM & Having 2 Nos Side Storage of Size (900Lx450Wx700HT) Made of 2 Layers of 19MM Board with All Edges to be Lipped with Teak Wood Beading & All Outside Exposed Surface To Be Finished With 4MM Veneer which shall be Melamine Polished & Inner Side To Be Finished with 1MM Laminate, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge. Customized |
| 137 | Providing & Making & Fixing of Back Storage of Size (2400Lx450Wx750HT) Made of 2 Layers of 19MM Board with All Edges to be Lipped with Teak Wood Beading & All Outside Exposed Surface To Be Finished With 4MM Veneer which shall be Melamine Polished & Inner Side To Be Finished with 1MM Laminate, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge. Customized |
| 138 | Providing & Making & Fixing of TV Pannel of Size (2400Lx450Wx750HT) Made of 2 Layers of 19MM Board with All Edges to be Lipped with Teak Wood Beading & All Outside Exposed Surface To Be Finished With 4MM Veneer which shall be Melamine Polished & Inner Side To Be Finished with 1MM Laminate, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge. Customized |
| 139 | Providing & Making & Fixing of Conference Table Made of 19MM Board, Top in 3 layers and Vertical drop in 3 Lair 19MM ply board. All the surface to be cladded with 4MM Veneer & Having S.S Frame Square Section of 302 Grade. All the Edges to be lipped with 4MM Veneer which shall be Water Based PU Polished, all complete as per design approved by E/I & Architect Incharge. Customized |
| 140 | Providing & Fixing of Table of Size - 1500W X 750D X 750HT Having Side Storage of - 900W X 450D X 750HT. The main table shall be made of 25mm thick PLB one side pre-laminate board confirming to IS-14587:1998. Soft closing access flap with in-built power box to be provided on work surface for wire management. Return table Work Surface should be made of 25mm thick PLB one side pre-laminate board confirming to IS-14587:1998. PLB will be E1-P2 grade and approved shade. Confirming to IS-12823:1990. 2 mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The edge band material should have Shore D hardness of 79± 4. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015 quality certification confirming to ASTM D 4499 standards for viscosity and thermal stability. The edges should be PVC Edge banded with matching finish or have an option of reverse water fall edges.Modesty Panel shall be made of 18mm thick PLT both sides pre-laminate board confirming to IS-14587:1998.The height of modesty shall be 450 mm.The modesty panel will be connected to the main table by 2 nos special Aluminum extruded brackets. The modesty will be fixed 150 mm from the edge of the table. • Cable management: The table will be provided with suitable grommet hole. Legs and Supports:- The MS supports are made of 55 x55mm diamond shape loop leg ERW tubes- 16g with levelers to cater for floor undulations- +/- 20 mm. ERW Tube confirming to IS 4923 : 1997 – 16g. Main leg members will be connected through a horizontal member size 1.6mm thk, 60x40 cold formed ERW tube confirming to IS 4923: 1997. The vertical and the horizontal tubes will be welded with CO2 MIG welding process confirming to IS 816 and ISO 9692-2. The leg will be fabricated using Argon & Co2 gas mixture on a Robotic welding machine to ensure adequate welding strength with consistency.• The legs will be connected with Cross beams to take care of the bending stress catering up to 1800 mm length and up to 900 mm depth of the work surface. Finish:- All metal components & aluminum die cast parts will be powder coated by Nano ceramic surface treatment process compiled to a Bend test-ASTM D3451 – 06, Adhesion -DIN EN 14901 Salt spray test- DIN EN ISO 9227, which is non-hazardous, environmental friendly and will have uniform powder coating thickness of 50-60-micron thickness.Wire Management: Make-Featherlite/Geeken/Hof/Equivalent |
| 141 | Providing & Fixing of LINEAR WORKSTATIONS SIZE:- 1200W X 600D X 750HT AND 300HT HEIGHT Specifications: Table Top - 25mm thick Pre Lam particle board with 2mm edge lipping on all exposed sides. Support - MS powder coated diamond shape leg of 55X55mm size with die cast connectors and supporting MS cross beams. Main Screen:- Aluminum anodised 30mm scree n with fabric magnetic and glass marker tiles. Privacy Screen:- 6mm thick acrylic screen on studs. Wiremanagement - 450mm metal flip up with provision to mount switches and sockets on MS cable tray and vertical wire entry cover between the intermeidate leg for power and data. |
| 142 | Providing & Fixing of Mobile Pedestal made of 0.6mm thick CRCA with 1 drawer units and 1 filling folder unit. The Drawer units are made mobile with the use of castors. Fixed pedestal shall be provided with an overall size 400mm X 450mm X 640mm. The pedestal shall be made up of CRCA powder coated sheet. The pedestal shall have 2 nos. of drawer i.e. 1 box drawer and 1 filing drawer. The drawer shall be operated on sliding channels to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key, Make-Featherlite |
| 143 | Providing & Fixing, High Back Chair's (SEAT & BACK IN LEATHERETTE) is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength.Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery: Seat Cushion with pre moulded foam having leatherette tapestery of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 3 locking positions, back rest “ Return Prevention” function. Back Frame is inserted with leathertte tapestery cushion & Adjustable Lumbar Support.Tension control is below the Seat.Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable.Seat is duly upholstered with approved fabric. Chair will have adjustable headrestChair Should be BIFMA Certified.Seat: Depth- 51.5 cm Width- 44.5 cm Dimensions: Width- 51.5 cm Depth- 53.5 cm Minimum Height- 99.5 cm Maximum Height- 108.5 cm Minimum Seat Height- 44.5 cm Maximum Seat Height- 52.5 cm Width (Arm to Arm)- 66 MODEL, Chair should be BIFMA and Green Guard certified.:- AMAZE HB, Make-Featherlite/Geeken Equivalent. |
| 144 | Providing & Fixing, Medium Back Chair's (SEAT & BACK IN LEATHERETTE) is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength.Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery: Seat Cushion with pre moulded foam having leatherette tapestery of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 3 locking positions, back rest “ Return Prevention” function. Back Frame is inserted with leathertte tapestery cushion & Adjustable Lumbar Support.Tension control is below the Seat.Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable.Seat is duly upholstered with approved fabric. Chair will have adjustable headrestChair Should be BIFMA Certified.Seat: Depth- 51.5 cm Width- 44.5 cm Dimensions: Width- 51.5 cm Depth- 53.5 cm Minimum Height- 99.5 cm Maximum Height- 108.5 cm Minimum Seat Height- 44.5 cm Maximum Seat Height- 52.5 cm Width (Arm to Arm)- 66 MODEL, Chair should be BIFMA and Green Guard certified.:- AMAZE HB, Make-Featherlite/Geeken Equivalent. |
| 145 | Providing & Fixing of Medium Back Chair's Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength.Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery: Seat Cushion with pre moulded foam having leatherette tapestery of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 3 locking positions, back rest “ Return Prevention” function. Back Frame is inserted with leathertte tapestery cushion & Adjustable Lumbar Support.Tension control isbelow the Seat.Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable.Seat is duly upholstered with approved fabric. Chair Should be BIFMA Certified.Seat: Depth- 51.5 cm Width- 44.5 cm Dimensions: Width- 51.5 cm Depth- 53.5 cm Minimum Height- 99.5 cm Maximum Height- 108.5 cm Minimum Seat Height- 44.5 cm Maximum Seat Height- 52.5 cm Width (Arm to Arm)- 66 cm Arm Rest Height- 18- 27.5 cm Chair should be BIFMA and Green Guard certified. AMAZE MB, Make-Featherlite/Geeken/Hof/Equivalent |
| 146 | Providing & Fixing of Fixed Leg Chair Made of The frame is made out of 25.4mm tube of 16 gauge tube confirming to IS-7138-1973, Welded by Co2 welding process for uniform surface finish and higher tensile strength perforation on the sheet is of uniform 2.5mm dimension and gives good ventilation.High quality hardware conforming to Hardness 38-44 and tensile strength – 1300 n/mm. IS 1363-1967.Seat is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Japanese T-nuts and riveted in to the plywood.Set and backUpholstery: Cushion with pre-moulded foam of 50 - 60kg/m3 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Injection moulded polypropylene armrests.Leatherette cusion Back on Frame. Back is injected moulded PP.Seat and back are duly upholstered with approved Leatherette. AMAZE VA, Make-Featherlite/Geeken/Hof/Equivalent |
| 147 | Providing & Fixing, Medium Back chair Having Base: Nylon Base- The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and confirming to ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards. The base shall be 67 cm pitch-center diameter -77 cm with castors. MS ring will be insert molded for better grip in the swaged taper. Castors: Twin Castors 50mm dia complying to ANSI / BIFMA X 5.1 – 2002. Castors will be made in PP. The axle pin will be rust protected- Zinc pacified. The pin should be designed to have push fit with lock ring. RoHS compliant castors. Gas lift: Standard Gas lift 100 mm stroke with pneumatic height adjustment as per the seat height criteria. - Class 4 as per ANSI BIFMA performance standards. Possibility to increase the seat height if required with Gas lift stroke- 110 -125 mm. Mechanism:Centre Tilt Mechanism: compact and stable with 8″ x 6″ mount holes as per European Standard. Initial seat angle of 3 degrees and full recline angle of 20 degrees for ergonomic comfort. Provided with common lever for locking and up/down adjustment and horizontal movement of the lever to engage and disengage lock at upright position Lever provided for rotational movement to operate gas lift and adjust chair height to user specification. Full length plastic knob provided to cover lever bar giving better aesthetical appeal to the mechanism. Knob provided to adjust spring tension to suit individual user in order to ensure maximum chair comfort. Arms:Fixed Arms Injected molded arms- polyurethane 20% GF nylon. The polypropylene arms will have steel inserts. The arm profile should blend with the back profile without gap. Seat: Seat Height- 450-540mm with hydraulic height adjustability of 90-100mm. Seat Width & Height- Size of the chair shall be -Back: 45.0cm. (w) x 59.0cm.(H) .Seat: 48.0cm (w) X 49.0cm.(D). Chair back should be connected to the Polyurethane arms for achieving comfortable seating posture.Effective back height from Seat - 560mm, Ply wood- 12 mm thick with 7 ply. Fire retardant type exterior grade phenol formaldehyde bonded. It will be hot pressed ply - conforming to I.S.I. 5509. The arm and back shall be fixed together to the seat with Allen bolts.The bolts will be screwed to the “T” nuts fixed to the plywood seat. Fabric: Upholstery: Seat & Back are duly upholstered with approved fabric. The back should have the option of mesh back AN-70 (black) and AN-75(grey). GSM for mesh 340. No flaming or progressive smolderingwithin one hour of placement of the cigarettes. Fire rated fabric confirming to BSEN 1021 and IS 15061-2012 Foam: Seat cushion with pre molded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3, Hardness -- 12.6kgf at 25%- Back cushion- density- 32g/sq in. Back:Mesh back on injected molded PP with 30% GF nylon. The back should have the option of mesh or fabric back. The mesh will be GSM 340 grade. . ALPHA MB, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent |
| 148 | Providing & Fixing of Single Seater Sofa of Size: 850L X 790D X 790H Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes, S-SERIES, Make-Featherlite/Geeken/Hof/Equivalent |
| 149 | Providing & Fixing of Double Seater Sofa of Size: 1200L X 790D X 790H Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes, S-SERIES, Make-Featherlite/Geeken/Hof/Equivalent |
| 150 | Providing & Fixing, CENTER TABLE @900 MM DIA, MODEL: CT-2105 MARBLE CENTER TABLE (0.9M), TOP - STONE , BASE - BLACK TIATANIUM. Supplying and installation of a contemporary center table designed to complement modern office and lounge interiors. The table has an overall dimension of 600mm (Length) x 600mm (Width) x 425mm (Height), offering a spacious and proportionate surface suitable for waiting areas, meeting lounges, or collaborative spaces. The tabletop is made from 12mm thick toughened glass, offering high impact resistance and durability. The glass is partially tempered, adding safety features to reduce the risk of sharp breakage. The top profile is square-edged with bevelled edges, enhancing the aesthetics while ensuring user safety through smooth contours and soft corners. The glass top is supported by high-quality vacuum suction caps, securely fixed over the underframe to ensure firm and stable placement without visible fasteners, contributing to a clean, floating appearance. The understructure consists of a stainless steel (SS) frame fabricated from SS 202 grade pipe, known for its corrosion resistance and strength. The pipes used in the frame have a diameter ranging from 20mm to 25.4mm and a wall thickness of 2mm, providing superior load-bearing capacity and structural stability. The frame is finished in a high-gloss chrome finish, offering a sleek, premium look suitable for modern interiors. To protect flooring surfaces and enhance stability, the table is equipped with high-quality PPCP (Polypropylene Copolymer) shoes at the base of each leg. These shoes prevent scratches and scuffs on delicate floors while also absorbing minor impact loads.This center table combines the durability of stainless steel with the elegance of toughened glass, making it a stylish, low-maintenance, and long-lasting addition to any office or hospitality environment., Make-Featherlite / Geeken / Hof / Ferris/ Equivalent |
| 151 | Providing & Fixing, CORNER TABLE @500 MM DIA, MODEL: CT-2105 MARBLE CENTER TABLE (0.5M), TOP - STONE , BASE - BLACK TIATANIUM. Supplying and installation of a contemporary center table designed to complement modern office and lounge interiors. The table has an overall dimension of 600mm (Length) x 600mm (Width) x 425mm (Height), offering a spacious and proportionate surface suitable for waiting areas, meeting lounges, or collaborative spaces. The tabletop is made from 12mm thick toughened glass, offering high impact resistance and durability. The glass is partially tempered, adding safety features to reduce the risk of sharp breakage. The top profile is square-edged with bevelled edges, enhancing the aesthetics while ensuring user safety through smooth contours and soft corners. The glass top is supported by high-quality vacuum suction caps, securely fixed over the underframe to ensure firm and stable placement without visible fasteners, contributing to a clean, floating appearance. The understructure consists of a stainless steel (SS) frame fabricated from SS 202 grade pipe, known for its corrosion resistance and strength. The pipes used in the frame have a diameter ranging from 20mm to 25.4mm and a wall thickness of 2mm, providing superior load-bearing capacity and structural stability. The frame is finished in a high-gloss chrome finish, offering a sleek, premium look suitable for modern interiors. To protect flooring surfaces and enhance stability, the table is equipped with high-quality PPCP (Polypropylene Copolymer) shoes at the base of each leg. These shoes prevent scratches and scuffs on delicate floors while also absorbing minor impact loads.This center table combines the durability of stainless steel with the elegance of toughened glass, making it a stylish, low-maintenance, and long-lasting addition to any office or hospitality environment., Make-Featherlite / Geeken / Hof / Ferris/ Equivalent |
| 152 | Providing & Fixing 3 SEATER Sturdy PU Tandem Made of Seat:Cold consolidation and foaming molding with high density polyurethane(PU),which with high trength metal frame. Armrest:Die casting aluminumalloy with polish treatment and sprayed with static powder. Back:Cold consolidation and foaming molding with high density polyurethane(PU), which with high trength metal frame. Feet:high quality aluminum alloy material, large precision casting mold. Die casting after direct polishing, electrostatic powder spraying treatment. Beam: T=2.5MM Dia=60MM, Hexagonal metal tube, with strong load-bearing capacity and stabilityBlack PP,protect the floor from scratching, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent |
| 153 | Providing & Fixing, Supplying and installation of a heavy-duty office steel almirah of overall dimensions 900mm (W) x 450mm (D) x 2400mm (H), designed to meet robust storage requirements in office and institutional environments. The unit is constructed with a fully welded body ensuring long-term structural rigidity and resistance to deformation under load.The almirah is fabricated using CRCA ‘D’ grade high yield strength steel, conforming to IS:513, ensuring superior strength and performance. The shelves are made from 0.7mm thick steel, while the back panel and doors are fabricated using 0.8mm thick high yield CRCA sheet, offering enhanced resistance against bending and wear. All other structural components, including side panels and top/bottom, are manufactured from 0.9mm thick CRCA steel, providing a solid and reliable enclosure. The unit features four height-adjustable shelves, supported by a shelf mounting system that allows vertical reconfiguration as per user needs. Each shelf is designed to support a uniformly distributed load (UDL) of up to 40 kg, making it suitable for storing files, office supplies, or other moderately heavy materials. The doors are reinforced and mounted with a three-way locking mechanism fitted with shooting bolts at the top, bottom, and center, ensuring secure storage and minimizing the risk of unauthorized access. A premium Mazak handle is provided, which is both corrosion-resistant and durable, offering a refined, long-lasting locking interface. For floor-level stability, especially on uneven surfaces, the unit is equipped with M10 screw-type levellers featuring hexagonal plastic bases, allowing easy adjustment and maintaining balance without damaging flooring.The entire metal body is treated with a multi-stage cleaning and phosphating process before finishing. The surface is then epoxy powder coated to a thickness of 50 microns (±10 microns), offering excellent adhesion, corrosion resistance, and a smooth, uniform finish suitable for high-use environments.This steel almirah is an ideal storage solution for offices, educational institutions, and government facilities, providing a secure, long-lasting, and aesthetically pleasing unit that meets stringent quality and performance standards., Make-Featherlite/Geeken Equivalent. |
| 154 | Providing & Making & Fixing of Storage Cabinet made of 19mm board, having shelves & shutters & teak wood beading & finished surface of 1mm thick Laminate including all hardware like tower bolts, hinges, lock & handle as per approved drawing & direction of Engineer incharge. |
| 155 | Reception/Security Table Made of 19MM Ply Board Understructure. Front Modesty to be Made with 12MM Flexi Ply & Finished with 6MM Corian & All Outer & Inner Surface To Be Finished with 1MM Laminate, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge. |
| 156 | supplying , installation , Testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
| 157 | supplying , installation , Testing & commissioning of manual call boxes of MS construction in surface/recess with strainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 158 | supplying , installation , Testing & commissionin response indicator on surface/recess Ms box having two LEDs mettallic cover complete with all connections etc. as required. |
| 159 | supplying , installation , Testing & commissionin fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching trasformer etc. complete as required. |
| 160 | supplying , installation , Testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement , audio and visual indication for fire alarm and public adress system, monitoring system including connections, interconnections etc complete as required. 10 zone panel for fire alarm system 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required-2 Nos. ( one to act asstanby) Talk back master station with LED PTT ( press to talk ) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/ communication suitable for 20 Nos. talk back unit-1 set. Anouncement control desk suitable for selection of different zones selectively and on ALL CALL switch with visual indication etc. complete as required -1 set Amplifier change over switch for inter changing amplifier -1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc. complete as required-1 NO. Gooseneck microphone with stand and ON/OFF switch -1 N0. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeter & ammeters , terminal blocks etc. complete as required-1 set Battery charger trickle cum boost to talk complete load of fire alarm PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 60 AH each sealed maintenanance free batteries-1 set. |
| 161 | supplying & laying of 2* 1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. |
| 162 | Supply,Installation, Testing & Commissioning ISI marked portable type fire extinguishers of 4.5 Kg capacity CO2 type as per IS- 15683 complete as per specification and fixed / install as per site condition: |
| 163 | Supply,Installation, Testing & Commissioning ISI marked portable type fire extinguishers of 5 Kg capacity ABC Dry Chemical powder as per IS- 15683 complete as per specification and fixed / install as per site condition : |
| 164 | Supply, Installation, Testing & Commissioning of Modular Type outdoor units ,equipped with Highly Efficient Hermetically Sealed Scroll with back pressure control mechanism(Back pressure control minimised refrigeratant leakage at part load operation), all Inverter multiple Compressors in Each ODU, special heat exchanger, Y- branch as required, auto check function for connection error, auto address setting,Refrigerant temperature control and capacity as mentioned below. VRV/VRF System shall be suitable for working on 52 °C ambient temperature, Refrigerant R 410A. The outdoor units must have Variable Evaporting temperature function to automatically modulate the refriegerant temp from 6 deg C to 11 Deg C for energy efficiency. The Outdoor unit must have Free Phase Technology to ensure Continued Operation during Phase Reversal. Should have refrigerant cooled PCB for enhanced life of PCB. Auto refreigerant Charge to ensure optimum quantity of refrigerant charge & 6 pole motor for better efficiency in low RPM range(improves intermediate efficiancy). Compressor backup operation function if malfunction occure in compressor. Capacity control should be 7% to 100%. ODU high exernal static pressure up to 78.4Pa, ensuring the efficient heat dissipation and stable operation of equipment. The System should have IEER more than 15. ODU- 18 H.P (RXYQ18BRY16) VRV-X HEAT PUMP SERIES |
| 165 | Supply, Installation, Testing & Commissioning of Modular Type outdoor units ,equipped with Highly Efficient Hermetically Sealed Scroll with back pressure control mechanism(Back pressure control minimised refrigeratant leakage at part load operation), all Inverter multiple Compressors in Each ODU, special heat exchanger, Y- branch as required, auto check function for connection error, auto address setting,Refrigerant temperature control and capacity as mentioned below. VRV/VRF System shall be suitable for working on 52 °C ambient temperature, Refrigerant R 410A. The outdoor units must have Variable Evaporting temperature function to automatically modulate the refriegerant temp from 6 deg C to 11 Deg C for energy efficiency. The Outdoor unit must have Free Phase Technology to ensure Continued Operation during Phase Reversal. Should have refrigerant cooled PCB for enhanced life of PCB. Auto refreigerant Charge to ensure optimum quantity of refrigerant charge & 6 pole motor for better efficiency in low RPM range(improves intermediate efficiancy). Compressor backup operation function if malfunction occure in compressor. Capacity control should be 7% to 100%. ODU high exernal static pressure up to 78.4Pa, ensuring the efficient heat dissipation and stable operation of equipment. The System should have IEER more than 15. ODU- 20 H.P (RXYQ20BRY16) VRV-X HEAT PUMP SERIES |
| 166 | Supply of Modular Type outdoor units ,equipped with Highly Efficient Hermetically Sealed Scroll with back pressure control mechanism(Back pressure control minimised refrigeratant leakage at part load operation), all Inverter multiple Compressors in Each ODU, special heat exchanger, Y- branch as required, auto check function for connection error, auto address setting,Refrigerant temperature control and capacity as mentioned below. VRV/VRF System shall be suitable for working on 52 °C ambient temperature, Refrigerant R 410A. The outdoor units must have Variable Evaporting temperature function to automatically modulate the refriegerant temp from 6 deg C to 11 Deg C for energy efficiency. The Outdoor unit must have Free Phase Technology to ensure Continued Operation during Phase Reversal. Should have refrigerant cooled PCB for enhanced life of PCB. Auto refreigerant Charge to ensure optimum quantity of refrigerant charge & 6 pole motor for better efficiency in low RPM range(improves intermediate efficiancy). Compressor backup operation function if malfunction occure in compressor. Capacity control should be 7% to 100%. ODU high exernal static pressure up to 78.4Pa, ensuring the efficient heat dissipation and stable operation of equipment. The System should have IEER more than 15. Outdoor conection kit 2 ODU (BHFP22P1356) VRV-X HEAT PUMP SERIES |
| 167 | Supply of Round Flow Cassette Type Unit- 4.13 TR + Corded Remote + Refnet, Model-FXFSQ125 all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 168 | Supply of Round Flow Cassette Type Unit- 3.13 TR + Corded Remote + Refnet, Model-FXFSQ100 all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 169 | Supply of Round Flow Cassette Type Unit- 2.65 TR + Corded Remote + Refnet, Model-FXFSQ80 all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 170 | Supply of HI-WALL Type Type Unit- 1.06TR + Corded Remote + Refnet, Model FXAQ32 all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 171 | One Time Lifting, shifting, positioning, installation, testing of indoor units, outdoor units, fittings (Imported Y-joints & header etc.) remote controls of indoor units, complete as per specification and drawings, all complete as per drawing, specification and direction as approved by Engineer -in-Charge. OUTDOOR UNITS |
| 172 | One Time Lifting, shifting, positioning, installation, testing of indoor units, outdoor units, fittings (Imported Y-joints & header etc.) remote controls of indoor units, complete as per specification and drawings, all complete as per drawing, specification and direction as approved by Engineer -in-Charge. INDOOR CASSETTEE UNITS |
| 173 | One Time Lifting, shifting, positioning, installation, testing of indoor units, outdoor units, fittings (Imported Y-joints & header etc.) remote controls of indoor units, complete as per specification and drawings, all complete as per drawing, specification and direction as approved by Engineer -in-Charge. INDOOR HI-WALL UNITS |
| 174 | Commissioning of VRV systems including topping R410A gas per site requirements all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 175 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 41.3 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 176 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 34.9 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 177 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 28.6 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 178 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 22.2 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 179 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 19.1 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 180 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 15.9 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 181 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 12.7 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 182 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 9.5 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 183 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 6.4 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 184 | Providing & Laying of Cable tray for copper pipe 300MM all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 185 | Providing & Laying of Cable tray for copper pipe 200MM all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 186 | Supply, Installation, testing and commissioning of Hard PVC Pipe Suitable for 10 Kg/cm2 water pressure including fittings such as elbow, socket, reducer, etc.insulated with 6 mm thick tubular nitrile insulation, 32 mm dia with 6 MM thickness all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 187 | Supply, Installation, testing and commissioning of Hard PVC Pipe Suitable for 10 Kg/cm2 water pressure including fittings such as elbow, socket, reducer, etc.insulated with 6 mm thick tubular nitrile insulation, 25 mm dia with 6 MM thickness all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 188 | Providing & fixing control cum transmission wiring of copper in suitable conduits between indoor and out door unit all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 189 | Supply & Laying of M S Slotted Angle for pipes and cables horizontaly and vertically along with threaded rod, nut, bolt, saddle, tie etc. |
| 190 | Wall Chaseing as per site requirement all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 191 | Supply & Fixing of Outdoor Stand all complete as per drawing, specification and direction as approved by Engineer -in-Charge. |
| 192 | Supply, Installation, testing and commissioning of 12U Rack Make - Dlink/Comrack |
| 193 | Supply, Installation, testing and commissioning of Rack Accessories Make - Dlink/Comrack |
| 194 | Supply, Installation, testing and commissioning of Metal Shelf Rack Make - Dlink/Comrack |
| 195 | Supply, Installation, testing and commissioning of Horizontal Cable Manager Make - Dlink/Comrack |
| 196 | Supply, Installation, testing and commissioning of Cat 6 patch panel, loaded. Make - Dlink |
| 197 | Supply, Installation, testing and commissioning of modular patch cables 1m 10/100/1000 Make - AMP/Molex/DC |
| 198 | Supply, Installation, testing and commissioning of 24 port POE switch 10/100/1000. Make - Dlink/Netgear |
| 199 | Supply, Installation, testing and commissioning of Dual Band Wave Wifi 6 Access Points. Make - Grandstream |
| 200 | Supply, Installation, testing and commissioning of cat6 Informatio0n Outlets, non PCB Pyramid type. Make - Dlink/Amp/Molex |
| 201 | Supply, Installation, testing and commissioning of Dual Face Plates with clear labeling. Make - Dlink/Amp/Molex |
| 202 | Supply, Installation, testing and commissioning of SMB UTM withXstream architecture, TLS 1.3 Decryption, Gigabit Ethernet, SFP, 7.7 gbps Throughput with 3 yr protection and support license. Make - Sophos |
| 203 | Supply, Installation, testing and commissioning of professional-grade PTZ camera with 20x optical zoom lens, H.264/H.265 streaming, USB network, RS485 and RS232 interfaces to control and 1080p60 HDMI video Make - Clearone/ Lumens |
| 204 | Supply, Installation, testing and commissioning of additional speakerphone unit. Make - Yealink/Aver/Equivalent |
| 205 | Supply, Installation, testing and commissioning of Conferencing hub. Make -Yealink/Equivalent |
| 206 | Supply, Installation, testing and commissioning of HDBaseT KVM Extender. Make - Bluestream |
| 207 | Providing, Installation, Testing & Commissioning of Hig Performance 1.4a standard HDMI 4K Cable. Make - Kordz/Nedis/Logic |
| 208 | Wireless AV platform allows simultaneous content sharing for up to four 1080p presenters , casting Miracast, Google Cast, and AirPlay , Visible wireless streams Up to 4 , Supports YouTube Live streaming, supports 3840×2160@60/59.9/50/30/29.97/25/24/23.98 Hz. Make- Atlona/Screen Beam/ Milestone/ A&T/Crestron |
| 209 | Ultra-thin Intel NUC Core system with 8gb ram and 256gb nvme ssd, wireless keyboard. Make Intel |
| 210 | Supply, Installation, testing and commissioning of 85\\" high resolution 4k UHD Crystal Pro LFD with HDMI port and 250nits. All accessories for installation including wall mounting stand/ bracket. Make - Samsung/Equivalent Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
