|
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete.As per DSR No 13.88 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 2 | Demolishing mud phaska in terracing and disposal of material with in 50 metres lead.As per DSR No 15.27 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 3 | Repairs to plaster of thickness 12 mm to 20 mm in With cement mortar 1:4 (1cement: 4 coarse sand) patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.complete As per DSR No 14.1.2 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mmAs per DSR No 15.23.2 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 5 | Disposal of malba. Up to 10.0 KMAs per DSR No 1.1.18 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metresAs per DSR No 15.12.2 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 7 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. MetresAs per DSR No 15.13.2 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mmAs per DSR No 11.41.2 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 9 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqmAs per DSR No 8.2.2.2 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 10 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite workAs per DSR No 8.3.2 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 11 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thickAs per DSR No 11.26.1 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 12 | Providing and laying Vitrified tiles in floor in different sizes (lhickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to lS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cemenl: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with lhe zero chipping diamond cufter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid flnish of size. Size of Tile 600 x 600 mm As per DSR No 11.41A.3.1 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.As per DSR No 8.31 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 14 | Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).As per DSR No 9.147.A4.2 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 15 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panesAs per DSR No 10.30.1 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 16 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).As per DSR No 10.28 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 17 | Steel Painting :(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works.As per DSR No 13.50.3 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 18 | Steel Painting :(b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.As per DSR No 13.62.1 With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 19 | Providing and fixing lSl marked flush door shutters conforming to lS : 2202 (Pan l) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including lSl marked Stainless Steel butt hinges with necessary screwsAs per DSR No 9.20.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 20 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strengthof 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and lengthcomplete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 65 x 100 mmAs per DSR No 26.86.5With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 21 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant.WPC to be laminated with PVC foil of minimum 14microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)35 mm thickAs per DSR No 26.88.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 22 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)As per DSR No 10.13.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 23 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. Flats,square or round bars etc. all complete. Fixed to Steel windows by weldingAs per DSR No 9.48.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 24 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.As per DSR No 14.34With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 25 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (a) 250mm x 16mm. As per DSR No 9.96.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 26 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :(a) 250 mm x 10mm As per DSR No 9.97.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 27 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm As per DSR No 9.100.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 28 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface additives of required shadeAs per DSR No 13.112.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 29 | Wall painting with two coats premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.As per DSR No 13.83.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 30 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.As per DSR No 13.8With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 31 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.As per DSR No 22.7.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 32 | Providing & applying 100% solids, flexible, elastomeric, UV stable, 2 component, waterproof, fast setting, monolithic, hydrophobic in nature, NO-VOC, CFTRI-US-FDA-175-300 coating on prepared surface as following :- P/L DONCRETE-PP solvent free primer @ 100gsm per m2 for conjunction of DONCRETE PU conforming to ASTM-D-2369 C, ASTM-D-2369, ASTM-D-638, ASTM-D-4541, ASTM-D- 638, ASTMD-2240, ASTM-E-96, ASTM-B-117-73, ASTM-D-91, ASTM-D-624, ASTM-D-4060, ASTM-C-8, ASTM-D-512, ASTM-G-53, ASTM-3912 @ 1 Ltr per m2 for 1.00 mm thick. The coating shall be carried out in single application with multiple passes, using high pressure plural component reactor strictly as per manufacture specification, rate materials, labor, and tools. Surface preparation includes repairs of holes, cracks, voids, pinholes, bug holes. Joints shall be filled with epoxy putty Confirming the ASTM D 638, ASTM D 4541, and ASTM D 2369. The corner rounding/angle fillet shall be prepared/replaced as required to smooth transition of coating from horizontal to vertical surfaces. (For Sunken area)With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 33 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plasterAs per DSR No 13.9.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 34 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C.20% with 1% concentrationAs per DSR No 2.35.2.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 35 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentrationAs per DSR No 2.35.3.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 36 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.As per DSR No 2.35.5With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsAs per DSR No 17.1.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 38 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lidAs per DSR No 17.2.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 39 | Providing & fixing toilet paper holder C.P. brassAs per DSR No 17.34.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 40 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.As per DSR No 17.16AWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 41 | Providing and fixing Jaquar Make Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook of quality and make as approved by Engineer - in - charge.As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tapAs per DSR No 17.7.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 43 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.As per DSR No 17.22AWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 44 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.As per DSR No 17.71With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 45 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.As per DSR No 17.72With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 46 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.As per DSR No 17.31With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 47 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern & jet)15 mm nominal bore As per DSR No 18.53.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 48 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal boreAs per DSR No 18.21.2.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 49 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board510x1040 mm bowl depth 200 mmAs per DSR No 17.10.1.3With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 50 | Providing & fixing PVC waste pipe for sink including PVC waste fittings Complete Flexible Pipe32mm DiaAs per DSR No 17.28.2.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 51 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm nominal boreAs per DSR No 18.49.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 52 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal boreAs per DSR No 18.51.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 53 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge.As per DSR No 17.80With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.For Internal Toilet 15 mm nominal outer dia PipesAs per DSR No 18.8.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.For Internal Toilet 20 mm nominal outer dia PipesAs per DSR No 18.8.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.For Internal Toilet 32 mm nominal outer dia PipesAs per DSR No 18.8.4With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 57 | Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on WallTerrace loop & Tank Filling Pipe20 mm nominal bore As per DSR No 18.10.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 58 | Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on WallTerrace loop & Tank Filling Pipe25 mm nominal bore As per DSR No 18.10.3With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 59 | Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on WallTerrace loop & Tank Filling Pipe32 mm nominal bore As per DSR No 18.10.4With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 60 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :20mm diameter pipeAs per DSR No 18.40.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 61 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :25mm diameter pipeAs per DSR No 18.40.3With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 62 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :32mm diameter pipeAs per DSR No 18.40.4With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 63 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :20mm diameter pipeAs per DSR No 18.46.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 64 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :25mm diameter pipeAs per DSR No 18.46.3With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 65 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :32mm diameter pipeAs per DSR No 18.46.4With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 66 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :For vertical pipe connection with terrace ringmain20 mm nominal boreAs per DSR No 18.17.1AWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 67 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :For vertical pipe connection with terrace ringmain25mm nominal boreAs per DSR No 18.17.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 68 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :For vertical pipe connection with terrace ringmain32mm nominal boreAs per DSR No 18.17.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 69 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal boreAs per DSR No 18.13.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 70 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.As per DSR No 18.48With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 71 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm dia (for rain water)As per DSR No 12.41.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 72 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single Push Fit Coupler110 mm diaAs per DSR No 12.42.2.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 73 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door110x110x110 mmAs per DSR No 12.42.3.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 74 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Plain bend 87.5 deg110 mm diaAs per DSR No 12.42.5.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 75 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm diaAs per DSR No 12.43.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 76 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.As per DSR No 12.22With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 77 | Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.All kind of soilPipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.As per DSR No 2.10.1.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 78 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:100mm dia SW pipeAs per DSR No 19.2.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 79 | Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes.Internal Toilet (Soil & Waste Pipe)75 mm As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 80 | Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes.Internal Toilet (Soil & Waste Pipe)110 mm As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 81 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Bend without door (45°)75mmAs per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 82 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Bend without door (45°)110mmAs per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 83 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Bend without door (87.5°)75mm bendAs per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 84 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Bend without door (87.5°)110mmAs per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 85 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Y' Fitting without door75mmAs per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 86 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Y' Fitting without door110mmAs per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 87 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Single Tee without door75mm As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 88 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Single Tee without door110 mmAs per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 89 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Single Tee with door75mm As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 90 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Single Tee with door110 mmAs per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 91 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Bend with door (87.5°)75mm As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 92 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Bend with door (87.5°)110 mmAs per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 93 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Reduced 'Y' Fitting without door110mm x 75mmAs per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 94 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Reduced Tee with door110mm x 75mm As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 95 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Coupler75mm As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 96 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Coupler110mm As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 97 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Vent Cowl110mm As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 98 | Providing, fixing, jointing and testing , of PVC Multi Floor Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge.110mm x 75mm x 50mm/40mm (Toilet)As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 99 | Providing, fixing, jointing and testing , of PVC Nahani Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge.110mm x 75mm (Toilet & Kitchen)As per DSR No NSRWith all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 100 | Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony)As per DSR No 18.58.2.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 101 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :150 x 100mm size P-type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5As per DSR No 19.4.2.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 102 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:100 mm diameterAs per DSR No 19.1.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 103 | Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.All kind of soilPipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.As per DSR No 2.10.1.2With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 104 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:100mm dia SW pipeAs per DSR No 19.2.1With all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 105 | GST will be paid as per Govt Rule Please Enable Macros to View BoQ information |
