|
| 1 | Dismantling plain or corrugated asbestos cement ( corrugated semi-corrugated etc) sheets in roof covering complete all as specified and directed. |
| 2 | Dismantling wall and ceiling boards ( fibre pulp insullation Etc) or insullation boards/ slabs blankets any thickness including cover fillets complete all as specified and directed. |
| 3 | Dismantling wrought iron or mild steel work of any desription not other wise provided complete all as specified and directed. |
| 4 | Demolition brickwork or stone work built in cement mortar including all quoins arches , pillers etc complete all as specified and directed. |
| 5 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick ( AZ 150) of an colour having tensile strength of 550 Mpa as in roof covering / clading to wall fixed self tapping screwe/ J or L type cranked hook bolts complete all as specified and directed. |
| 6 | Ditto as per above item No. 5.00 but plain sheet as in ridge all as specified and directed |
| 7 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk forbalusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; MS wind tie for roof including securing bolt etc posts and struts in fencingincluding cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire meshetc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed. |
| 8 | M&L providing cement concrete type B1 1:2:4 ( 20 mm graded aggregate) in roof kerb or mud stops rounded or chemfered edge complete all as specified and directed. |
| 9 | S&F rolled sections as in main and cross beams , hip and jack rafters , purline where connected to common rafters and running rails and guides for sliding doors , fixed with angle cleats or other connecting plates confarming to Fe-410 Gde E-250 quality complete all as specified and directed. |
| 10 | M&L for brick work burnt ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 complete all as specified and directed. |
| 11 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 12 | M&L for Rendering 15 mm thick in cm (1:4) stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finshed even and fair surface without using extra cement complete all as specified and directed. |
| 13 | M&L for Rendering 15 mm thick in cm (1:4) stone masonry surfaces or fair face of brick-work or on one side of lathing finshed even and fair surface without using extra cement complete all as specified and directed. |
| 14 | M&L for preparation of new plastered/ umplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of distemper oil emulsion over one coat of putty 1 mm thick of any tint/shade complete all as specified and as directed |
| 15 | M&L for preparation of old decorated distempered plastered/ umplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of distemper oil emulsion over of one coat of putty 1 mm thick of any tint/shade complete all as specified and as directed |
| 16 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and 1 mm thick putty over new surfaces complete all as specified and directed. |
| 17 | M&L for preparation of old painted surfaces of wooden /wood based materials of any description , not otherwise described ,over 10 cm width or girth and applying one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all dropings complete all as specified and directed. |
| 18 | S&F Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed. |
| 19 | M& L for 4mm thick board/ tiles for E board false ceiling 60X60 cm in size fixed with on frame work or with staple on snap grid as in ceiling flat or sloping complete all as specified and directed. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed. |
| 21 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and directed. |
| 22 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc complete all as specified and directed. |
| 23 | M&L For Virified Ceramic tiles, dark shade/double charged/ultracharged 8 to10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed |
| 24 | M&L for Glazed ceramic coluered tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thickset and jointed in neat cement slurry and pointed in white or colour cement to match and incuding 10mm thick rendering in CM 1:4 complete all as specified. And as directed |
| 25 | Complete removing existing roof treatment any type and M&Lfor roof treatment with APP modified polymeric water proofing membrane, 3mm thick having centre core not less than 100 micron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 2.60 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps including rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed |
| 26 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed. |
| 27 | M&L for preparation of new steel surfaces of any description over 10 cm girth two coat synthetic enamal paint over a coat of red oxide complete all as specified and directed. |
| 28 | M&L for preparation of old steel surfaces of any description over 10 cm girth one coat synthetic enamal paint complete all as specified and directed. Please Enable Macros to View BoQ information |