|
| 1 | Dismantling timber scantlings 40 Sqcm and over in section, in any position, unframed work, complete all as specified and as directed by Engineer-In-Charge. |
| 2 | Dismantling of mild steel work of any description, complete all specified and directed. |
| 3 | S&F for mild steel structural steel work as in roof trusses any description of steel member purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-290-W (Gde-E-165), complete all as specified and directed. |
| 4 | Fixing only rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to grade Fe 290-W (Gde E-165 quality-A), complete all as specified and directed. |
| 5 | S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed including dismantling of AC sheet, complete all specified and directed. |
| 6 | S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, including dismantling of AC sheet, complete all specified and directed. |
| 7 | S&F for Non asbestos ceiling board of 4mm thick, designer, in ceiling fixed as per manufacturer’s instructions, including powder coated galvanised iron snap grid frame work of main and tee (weight not less than 240gm/Rm), angle (weight not less than 217 gm/Rm), grid size 595x595mm, for false ceiling all as specified, and hangers not less than 6mm nominal dia, galvanised iron (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of galvanised iron wire of 4.0mm dia, length as required at site and expansion hold fasteners 12.50mm dia, 40mm long including dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets,complete all specified and directed. |
| 8 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed. |
| 9 | M&L for brick work with sub class 'B' bricks old size straight or curved in plane exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 10 | All as per above but except brick. |
| 11 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 12 | M&L for rendering 10 mm thick in cement mortar 1:6 on any surfaces of brick work or concrete surfaces, finished even & smooth without using extra cement, complete all specified and directed. |
| 13 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement,complete all specified and directed. |
| 14 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer over two coats of wall care putty, complete all as specified and as directed by Engineer-In-Charge. |
| 15 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of primer , complete all as specified and as directed. |
| 16 | M&L for preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment and applying two coats of distemper oil emulsion over one coat of primer over two coats of wall care putty, complete all as specified and as directed by Engineer-In-Charge.. |
| 17 | M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash, complete all as specified and as directed. |
| 18 | M&L for preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment and applying two coat of cement based paint, complete all as specified and as directed by Engineer-In-Charge. |
| 19 | M&L for complete removal existing treatment from old surface of walls and applying two coats of exterior emulsion paint (Apex Ultima or equivalent), over one coat of primer including preparation of old surfaces, complete all as specified and as directed by Engineer-In-Charge. |
| 20 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and directed. |
| 21 | M&L for providing cement concrete type C-1, 1:3:6 ( using 20mm graded crushed stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing the surface even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 grade and 3 parts of sand ( all by weight), complete all as specified and as directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 23 | M&L for plain cement concrete nominal mix M-15 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), nominal mix, 25mm thick, as in floors, finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-In-Charge. |
| 24 | M&L for machine cut kota stone slab, minimum size shall be (550x550mm), flooring 16-18mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish (mirror finish) complete, over and including screed bed or bedding layer of mortar 20mm thick in cement mortar 1:3, complete all as specified and as directed. |
| 25 | M&L for machine cut kota stone slab, (size shall in one length), 16-18mm thick, as in riser of steps, skirting, dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, and including laid over screed bed or back plastering layer of mortar 15mm thick in cement mortar 1:4, complete all as specified and as directed by Engineer-In-Charge. |
| 26 | M&L for non-skid ceramic coloured tiles of size 400x400 mm and 7 to 8 mm thick, set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, complete all as specifed and directed. |
| 27 | M&L for non-skid ceramic coloured tiles of size 600x600 mm 7 to 8 mm thick, set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6, complete all specified and directed. |
| 28 | M&L for non-skid ceramic coloured tiles of size 600x600 mm 7 to 8 mm thick, set and fixing in skirting/dado or any other vertical surfaces and pointed in white or coloured cement to match and including 10 mm thick for laying floor finishes in cement mortar 1:4, complete all specified and directed. |
| 29 | M&L for glazed ceramic coloured designer pattern tiles 450mmx 300mmx7mm thick on vertical surface such as skirting, dado etc. set and jointed in white colour cement, including rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 as backing coat for tiles, complete all as specified and directed. |
| 30 | M&L for black granite (of any type) 16-18mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and over 20mm thick screed bed in cement mortar 1:3, complete all as specified and as directed. |
| 31 | Taking down chowkhat or frame with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed by Engineer-In-Charge. |
| 32 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, complete all as specified and directed by Engineer-In-Charge. |
| 33 | Taking down shutter of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm, complete all as specified and directed. |
| 34 | S&F for factory made steel window, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter with wire mesh and plain sheet 4mm thick glass, jointed internally and made with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as shown in drawing No- CEUZ/TD-1517/15, sheet No- 1/3 to 3/3 and as directed . Note :- Cost of window shall include all members and spare parts as elaborated in the Drwaing and in the specifications and nothing shall be paid extra seperately. |
| 35 | S&F for anodised aluminium powder coated (minimum thickness of powder coating 50micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed. |
| 36 | S&F for aluminium powder coated anodised aluminium window, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm , including anodised aluminium grill of mesh size 70mm x70 mm and thickness 3-4 mm (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.)suitable handle (1 No.) (thickness of powder coating should not less than 50 micron) each measured seperately, complete all as specified and as directed by Engineer-in-Charge. |
| 37 | M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 125x60mm, complete all as specified and as directed . |
| 38 | M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 105x60mm, complete all as specified and as directed. |
| 39 | M&L for plain cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling of steel chowkhat single or double rebated or for fixing, complete all as specified and directed. |
| 40 | S&F for glazed and skeleton shutters in second class softwood, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (in 3 panel) with sash bars, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed by Engineer-In-Charge. |
| 41 | S&F for 35 mm thick, second class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed by Engineer-In-Charge. |
| 42 | S&F for 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces covered with decorative face veneer with lipping/frame to match complete all as specifed and directed. |
| 43 | S&F for 40 mm thick flush shutter prepared to receive glass/ wire cloth, etc. (in 2 panels n. exc 0.4 sqm each) with sash bars, solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces covered with decorative face veneer with lipping/frame , including stainless steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm etc.; supplied and fitted to chowkhats, complete all as specified and as directed . |
| 44 | S&F in repair for 18/19 mm thick particle board prelaminated one side with decorative choice laminated & other side white balancing laminated, , interior grade, commercial type, fixed with screws to timber frame-work as in cupboard shutter, shelves, cabinet etc., complete all as specified and as directed. |
| 45 | S&F for external teak wood lipping, 6mm thick fixed with nails over block board or veneered particle board for cupboard shelves etc., complete all as specified and as directed. |
| 46 | S&F for continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) in 30mm, complete all as specified. |
| 47 | S&F hasp and staple 100 mm long safety type, of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw as in cupboard and locker, complete all as specified and as directed. |
| 48 | S&F for 100 mm long extruded aluminium alloy handle, cast type, anodised ISI marked, complete all as specified and as directed. |
| 49 | S&F for aluminium anodised barrel tower bolt ISI marked of extruded section and fixed, length of bolt 100mm, complete all as specified and directed by Engineer-In-Charge. |
| 50 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed by Engineer-In-Charge. |
| 51 | M&L for applying two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth, complete all as specified and as directed. |
| 52 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint, complete all as specified and as directed. |
| 53 | S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rein forced with M.S. square tube supplying and fixing in opening as per specification and drawing, complete all as specified and directed by Engineer-In-Charge. |
| 54 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails M.S. frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded etc. with suitable PVC sheet beading and jointing etc, complete all as specified and directed by Engineer-In-Charge. |
| 55 | S&F 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and as directed. |
| 56 | S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (ISI marked), complete all as specified and as directed. |
| 57 | S&F for mild steel spring stove enameled black for door 300mm, ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, complete all as specified and as directed. |
| 58 | S&F in repair for stainless steel wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 59 | S&F in repair for stainless steel wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and as directed. Please Enable Macros to View BoQ information |
