|
| 1 | S&F in repairs False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders/Hangers 4 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs/trusses complete all as specified standard galvanised sections in a grid size of 600mmx600mm including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed. |
| 2 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings/ ridges complete all as specified and directed. |
| 3 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 4 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 5 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick and 600 mm width of an ecofriendly colour having tensile strength of 550 Mpa as in ridges/valley , fixed with self tapping screws incl dismanling of existing ridge complete all as specified and directed. |
| 6 | S&F Plain, galvanised, mild steel sheeting, 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, joints welded or soldered complete all as specified and directed. |
| 7 | S&F Machine cut kota stone in flooring/treads of steps 18-20 mm thick over and incl 20 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if reqd complete all as specified and directed. |
| 8 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry @ 3.0 Kg of cement per Sqm complete all as specified & directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 10 | M&L for non skid (joint free) coloured ceramic tiles 7 to 8 mm thick area of each tile exc. exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 11 | M&L for non skid (joint free) coloured ceramic tiles 7 to 8 mm thick area of each tile exc. exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical areas such as skirting / dado etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 12 | M&L for glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl rendering 10mm thick in CM (1:4) and finished rough complete all as specified and directed. |
| 13 | M&L for vitrified ceramic tiles, coloured, heavy duty, non skid (joint free) 12 mm thick, exterior grade, area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over & including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 14 | M&L for 18-20mm thick marble Green / Bhaisiana Zebra (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, urinal partions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl edge moulding to give high gloss finish complete all as specified and directed. |
| 15 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sq.m with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 16 | Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 17 | S&F Pressed steel frames for doors, 125x60mm size, made out of 1.25mm thick sheet,with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl filling of the frame with plain cement concrete complete 1:3:6 type C-0 complete all as specified and directed |
| 18 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 22 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 23 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 incl taking down existing one complete all as specified and directed |
| 24 | Taking down roof trusses, coupled rafters or trussed beams of span exc 4m but n.exc 8m complete all as specified and directed. |
| 25 | Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work etc complete all as specified and directed. |
| 26 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE 410W Gde E250 quality A complete all as specified and directed |
| 27 | M&L for rolled mild steel as Fe-410 Gde E-250 in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing |
| 28 | M&L for Tubular framed steel trusses (all as per pattern of existing dismantled trusses) made out of MS medium grade tube (ERW or induction butt welded) upto 60mm bore conforming to I.S.1161-1979 grade St.-240 Quality A, including welding of distance pieces, cleats and application of two coats of synthetic enamel paint over a coat of red oxide primer on exposed surface, etc complete all as specified and directed. |
| 29 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm but n.exc 30 cm long and 16mm dia of shank complete all as specified and directed. |
| 30 | M&L for Cement concrete 1:2:4 type B1 ( using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or for fixing trusses complete all as specified and directed. |
| 31 | Supply & fixing 35 mm thick wire guazed and skeleton shutters (2nd class hardwood) , open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc.; sizes of members of shutters as specified in fitted to chowkats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed |
| 32 | S& F in repairs Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 33 | S&F 3 mm sheet glass (for windows), ordinary quality in square or rectangle n. exc 0.5 sqm each pane fixed to framed work complete all as specified and directed. |
| 34 | S & F Stainless steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/all beads complete all as specified and directed. |
| 35 | S F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.. |
| 36 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 37 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy acomplete all as specified and directed. |
| 38 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 39 | S & F 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 40 | S & F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 41 | M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 42 | M&L for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight incl demolition and complete all as specified |
| 43 | S&F in repairs 20 mm bore mild steel drapery rods with 1 mm thick PVC wood grain coating including brackets and knobs fixing on windows and doors for hanging curtains incl taking down old cutain rods complete all as specified and directed. |
| 44 | Taking down cement plaster, hacking for key, raking out joints of old brick work built in cement mortar and scrubbing down with water etc. to receive plaster complete all as specified and directed. |
| 45 | M&L for 15 mm thick rendering in two layers (10 mm thick in cement mortar 1:6 and 5 mm thick in CM 1:4) with water proofing compound) mixed with WPC @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.Note: Water proofing compound shall be measured and paid for separately. |
| 46 | M&L for rendering 10 mm thick plaster in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 47 | M&L for 5 mm thick rendering in cement mortar (1:3) on ceiling surfaces and finished even and smooth without using extra cement & preparation of newly plastered surface and applying three coats of white wash complete all as specified and directed. |
| 48 | Supply only liquid water proofing compound complete all as specified & directed. |
| 49 | M&L for preparation of new surfaces of plaster and applying two coats of cement base paint over one coat of alkali resistant priming paint on wall surfaces complete all as specified and directed.. |
| 50 | M&L for preparation of new plastered surfaces of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed. |
| 51 | M &L for Preparation of old painted surfaces of steel of any discription exc 10cm width or girth and providing two coats of synthetic enamel paint complete all as specified and directed. |
| 52 | M &L for preparation of New surfaces of iron or steel of any discription exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 53 | M &L for preparation of New wooden or wood based surfaces of any discription exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 54 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 55 | M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed. |
| 56 | S&F in repair Bib taps with flange for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed complete all as specified and directed. |
| 57 | S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 58 | S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) fancy type, chromium plated, with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 59 | S&F 600 mm x 450 mm mirror of selected quality 5 mm thick glass with PVC frame fixed with chromium plated brass screws and cup washers with PVC beading all as spd. |
| 60 | S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 61 | S & F in repairs Vitreous china wash basin of size 550x400mm, white flat back, including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread , all as spd and directed |
| 62 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of PVC seat and cover for pedestal pan complete all as specified and as directed. |
| 63 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 64 | Supply & fixed CP Brass shower rose 200x200 mm size with flexible brass arm 450-550mm long complete all as specified and directed. |
| 65 | S & F PVC sheet corner shelf assembly consisting of with chromium plated bracket guard and railing complete all as specified. |
| 66 | S&F in repair towel rail brass chromium plated 600 mm long complete all as specified and directed. |
| 67 | S&F Stainless steel Grating doom 100mm dia with waste hole complete fixing in floors complete all as specified and directed. |
| 68 | S&F Stainless steel Grating doom 100mm dia complete fixing in floors complete all as specified and directed. |
| 69 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 70 | S&F in repair Tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking down existing complete all as specified and directed. |
| 71 | S & F PVC (SWR) pipes 110mm single socked, in any length with rubber ring joints fixed to wall/laid in trenches incl taking down exiting rain water pipes any type complete all as specified and directed. |
| 72 | S & F PVC Bends 100mm bore dia fixed complete all as specified |
| 73 | Dismantling of cast iron soil, waste and vent pipes 100/75mm bore dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 74 | S & F PVC SWR floor trap, 75mm bore dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 75 | S & F PVC SWR floor trap, 100mm bore dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 76 | Demolition of cement concrete of any description & in any position not otherwise described complete all as specified and directed. |
| 77 | M & L for 25 mm thick PCC 1:2:4, type B-1 (using 20 mm graded aggregate) as in sub floors for laying floor finish complete all as specified and directed |
| 78 | M&L for 75mm PCC 1:4:8: type D-2 (using 40 mm graded aggregate) in floors as sub base, surface finished even and rough to receive top floor finish complete all as specified and directed. |
| 79 | M&L for 100mm PCC 1:4:8: type D-2 (using 40 mm graded aggregate) in floors as sub base, surface finished even and rough to receive top floor finish complete all as specified and directed. |
| 80 | S & F in repair Machine Pressed precast concrete interlocking paver block any shape and size M-35 Grade, 60mm thick confirming to IS-15658-2006 with grey cement and pigments, top 6-8mm thickness gloosy finish coloured, epoxy coated, laid over and including 50mm thick sand cushioning complete all as specified & directed. |
| 81 | M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 82 | Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level all as specified and directed. |
| 83 | Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 84 | M&L for Reinforced cement concrete, 1:2:4 type B-1, (using 20mm graded stone aggregates) in columns, pillars, posts, struts complete all as specificed and directed. |
| 85 | M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 86 | Surface excavation, n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 87 | Excavation in post holes (or similar holes) each n exc 0.5 cum in any type of soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 88 | Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, cables, pipes etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed. |
| 89 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified & directed. |
| 90 | Removing surplus excavated spoil to a distance not exc. 50m and depositing where directed at a level not exc 1.5m above the starting pointcomplete all as specified & directed. |
| 91 | Supply and laying in repair DWC (double wall corrugated) pipe 40mm bore dia, type SN-8, laid for protection of cable, in trenches, floors etc. complete all as specified and directed. |
| 92 | Supply & laying in repairs galvanised steel tubing, light grade 40mm bore dia, laid for potetion of vable, in trenches, floors etc. complete all as specified and directed. |
| 93 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 94 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 95 | M&L for hard core of gauge n exc 63 mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface,complete all as specified and directed. |
| 96 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified & directed. |
| 97 | M&L for point wiring for one light/fan/bell point controlled with one switch with PVC insulated fire retardant low smoke multistranded copper conductor cable of 1.5 sqmm in and including PVC concealed non metallic conduit (ISI Marked) medium grade not less than 20 mm dia with all accessories and including pressed steel sunken terminal boxes (for mounting switches / regulators/socket /bell push etc ) made of not less than 16 gauge MS sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke multistranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall,making good the disturbed surfaces to match with the existing complete all as specified and directed by Engr-in-Charge (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note :In ceiling Portion surface conduit wiring shall be carried out complete all as specified & directed. |
| 98 | All as per description of serial item No. 97 here in before but one 5 pin socket out let 5/6 Amps on same board with other switches. |
| 99 | All as per description of serial item No. 97 here in before but one 5 pin socket out let 5/6 Amps on independent board |
| 100 | All as per description of serial item No. 97 here in before but for 2 in 1, 15/16 amp multipurpose socket outlet/metal plug top with 2.5 sqmm FRLS cable PVC insulated unsheathed multistrand including 2.5 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 101 | All as per description of serial item No. 97 here in before but for 2 in 1 15/16 amp multipurpose socket outlet/metal plug top/ Geyser with 4 sqmm FRLS cable PVC insulated unsheathed multistrand including 4 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 102 | S&F Switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed. |
| 103 | S&F multi purpose socket outlet for 2 & 3 pin, 6A, flush type complete all as specified and directed. |
| 104 | S&F switch piano, flush type, single pole, one way, 16 Amps 230 Volts complete all as specified and directed. |
| 105 | S&F socket outlet 2 in 1, 5 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed. |
| 106 | S&F stepped type electronic mini /delux fan regulator 100 watt rotary step complete all as specified and directed. Please Enable Macros to View BoQ information |
| 107 | S&F stepped type electronic mini /delux fan regulator 100 watt rotary step complete all as specified and directed. Please Enable Macros to View BoQ information |
