|
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of brick work, stone/boulder masonary built in cement mortar complete all speecified and directed |
| 3 | M&L for Pre-cast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar1:6, complete all as specified. |
| 4 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in C.M. 1:4, complete all as specified. |
| 5 | M&L for brick work with sub class 'B' brick old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortor 1:6 complete all as spfd & directed. |
| 6 | Material and labour for providing anti-termite treatment (Post Construction) along the external wall below concrete apron/plinth protection using chemical emulsion (for using Chloropyriohos emulsifiable concentrates conforming to IS-8944-2005) @ 2.25 Litre per linear metre, the hole 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match with the existing floors complete all as specified and directed. |
| 7 | Material and labour for providing anti-termite treatment (Post Construction) under existing floors using chemical emulsion (for using Chloropyriohos emulsifiable concentrates conforming to IS-8944-005) @1.00 Litre per hole, 300mm apart including drilling and plugging 12mm dia holes with CM (1:2) to match with the existing floors complete all as specified and directed. |
| 8 | Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed. |
| 9 | M&L 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for Preparing new plastered wall surfaces and applying two coat of oil emulsion distemper over a coat of wall putty of 1mm thckness over plastered surface to prepar the surface even and smooth complete all as specified and directed. |
| 12 | M&L for Preparing old surfaces, plastered or unplasterd old decorated wall/ceiling surfaces and applying two coat of oil emulsion distemper over a coat of wall putty of 1mm thckness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 13 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less that 50gm/liter and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter / 10 Sqm over and including priming coat of exterior primer applied @0.90 liter/10 Sqm over new surfaces over 1mm th wall putty complete all as specified. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 15 | M&L for vitrified ceramic light shade tiles/outdoor tiles 8-12mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in floor etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over and including screed bed,rendering or bedding layer of mortar CM (1:6) 15mm thick all as specified and directed |
| 16 | M&L for vitrified ceramic light shade tiles/outdoor tiles 8-12mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in skiritng etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over and including rendering in CM (1:4) 10 mm thick all as specified and directed |
| 17 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm and not exceeding 0.36 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed |
| 18 | M&L for coloured glazed ceramic tiles in vertical surface, 450x350/300x600x7-8mm thick set and jointed in neat sement slurry and pointed in white or colour cement to match over 10 mm thick plaster in CM 1:4 complete all as spfd & directed. |
| 19 | M&L Granite (of any type) tiles 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in CM 1:6 etc complete all as specified and as directed |
| 20 | Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 21 | Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door /window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 24 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 25 | S&F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded all as spfd and as directed. |
| 26 | All as per srl item No 24 but without glazing bar |
| 27 | M&L for 18/19mm thickness Medium density fibre board,one side laminated other side balancing, exterior grade, fixed to framework/wall/hinges with screws etc |
| 28 | S&F 6mm thick teak wood lipping fixed with nails to board all as spfd and directed. |
| 29 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm) all as specified. |
| 30 | S&F Cabinet Hinges(Set of 2),Soft Close, Full Overlay 4 Hole, Nickel Plated for 14-20mm Thick shutter for wardrobe, kitchen, Bathroom etccomplete all as specified and directed. |
| 31 | S&F bottom patch appx size 164x52mm secured on to the bottom of the toughened glass door leaf to accept the spindle of floor spring with stainless steel 304 cover secured with small 'L' key with adjustable pivot point 55/65 mm with stainless steel finish complete all as specified and directed. |
| 32 | S&F top patch appx size 164x52mm secured on to the top of the toughened glass door leaf to accept the pivot of wall mounted over panel patch with stainless steel 304 cover secured with small 'L' key with adjustable pivot point 55/65 mm with stainless steel finish complete all as specified and directed. |
| 33 | S&F wall mounted over panel patch with pivot appx size 164x52mm secured on to the top of the toughened glass door leaf with stainless steel 304 cover secured with small 'L' key with adjustable pivot point 55/65 mm with stainless steel finish complete all as specified and directed. |
| 34 | S&F wall to glass connector patch appx size 52x52mm secured onto the toughened glass with stainless steel 304 cover secured with small 'L' key with stainless steel finish complete all as specified and directed. |
| 35 | S&F H-type Glass door handle(length 325mm and dia 25mm) set (2 no.s) made with stainless steel 304 with gasket secured onto the toughened glass stainless steel finish complete all as specified and directed. |
| 36 | S&F in repairs Thin Rim Table Top Basin in Black Matt or other color as approved,Size: 420x420x150 mm, Shape - Curved Square,incl brass chromium plated waste fittings, fixing on slab/granite incl necessary fixing arrangement complete all as specified and directed.(CAT part no. JDS-BLM-25911 of Jaquar or equivalent of other make) |
| 37 | S&F 15mm Single Lever basin mixer in Black Matt or other color as approved Tall Boy with appx 155mm Extension Body and appx 267mm height Fixed Spout without Popup Waste System with 600mm Long Braided Hoses(2no.s),cast copper alloy, nickel chromium plated,chrome finished incl necessary accessories complete all as spfd & directed.(CAT part no. KUP-BLM-35005BPM of Jaquar or equivalent of other make) |
| 38 | S&F in repair Rimless, Blind Installation Wall Hung WC Black Matt or other color as approved With UF Soft Close Slim Seat Cover, Hinges and Accessories Set, Size: 375x520x400 mm all as specified and as directed .(CAT part no. SLS-BLM-6953BIUFSM of Jaquar or equivalent of other make) |
| 39 | S&F Single piece Slim Concealed Cistern 3.0/6.0 LPF with Wall Mounting Frame, Installation Kit and “P-Type” Drain Pipe Connection Set for Wall Hung WC including Flush Control Plate all as specified and as directed (CAT part no. JCS-WHT-2400WP of Jaquar or equivalent of other make) |
| 40 | S&F in repair 15mm bore Chromium plated cast copper alloy Two Way Bib Cock with Wall Flange complete all as specified and directed.(CAT part no. LYR-38041 of Jaquar or equivalent of other make) |
| 41 | S&F 900mmx600mmx6mm thick frameless rectangular Bathroom Wall Mirror with moulded edges with heavy duty hooks at back (4no.s) fixed with screws complete all as spfd & directed.(Make-Saint Gobain/Modiguard) |
| 42 | S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed. |
| 43 | S&F150 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed |
| 44 | S&F150 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed |
| 45 | S&F 100 mm Extruded brass handles,fabricated type polished complete all as specified and directed. |
| 46 | S&F 150 mm Extruded brass handles,fabricated type polished complete all as specified and directed. |
| 47 | S&F 10mm thick Toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes,necessary etching required. |
| 48 | S&F in vitreous china sensor based urinal min. size 480x300x740 mm with sensor Flushing Valve for Urinal with complete Kit (Battery Operated incl battery) including Fixing Accessories, urinal accessories and waste coupling (Urinal CAT part no. URS-WHT-13255 & sensor CAT part no. SNR-51097 of Jaquar or equivalent of other make) |
| 49 | S&F Curved shaped urinal partition min. size 450x 900 mm of 8mm thick frosted glass incl necessary glass fittings with chrome finish.(CAT part no. JSE-CHR-810UC450X of Jaquar or equivalent of other make) |
| 50 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 51 | Hacking out old broken glass (any thickness, size, quality or descrption) from metal frame including punching or driling outold glazing pins/springs and providing new ones. |
| 52 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed. |
| 53 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 54 | S&F in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 55 | Supply and fix in repairs CP Wall Mixer with provision for Overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges for 15mm dia pipe complete all as specified and directed |
| 56 | S&F in repairs Brass CP mixer fancy type for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 57 | S&F in repairs vitreous china wash basin,rectangular or oval shaped with min . Size 550X400mm incl 32mm size brass chromium plated waste fittings,waste pipe fixing in slab/granite top incl necessary fixing arrangement complete all as specified and directed. |
| 58 | S&F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories incl flushing cistern etc. ) complete in all respect all as specified. |
| 59 | S&F in repair 15mm bore Chromium plated cast copper alloy Two Way Bib Cock with Wall Flange complete all as specified and directed.(CAT part no. LYR-38041 of Jaquar or equivalent of other make) |
| 60 | S&F 600mmx450mm bevelled edge mirror of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs complete all as spfd & directed. |
| 61 | S&F in Grating doom chromium plated 100mm dia all as specified and directed |
| 62 | S&F Toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed. |
| 63 | S&F in 32mm bore of trap Brass chromium plated bottle traps for wash basins/urinals with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed |
| 64 | S&F in repair CP brass Towel stand fixed with and including Chromium plated brass screws and cleats complete all as specified and directed |
| 65 | S&F in repairs stop valve/angle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy incl flange screwed down for iron pipe and fixed etc complete all as specified and directed. |
| 66 | S & F in repair Harrison rails/curtain rods, mild steel, chromium plated with brackets, finials,ends knobs,stops, rollers etc fancy type as approved complete all as specified. |
| 67 | S & F in repairs Stainless steel kitchen plate rack 900 x 600 and made out of 1 mm thick stainless steel sheet complete all as directed by Engr in Charge. |
| 68 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 69 | Supplying & laying in trenches/wall Polyethylene (PE-AL-PE) composite pressure pipes (Inner dia 16mm) including all Crimp type internal sealing Plastic-Metal Composite fittings (such as elbows, tees, reducers, etc.) complete fixed to wall or laid in floor etc including taking up or down 15 mm GI tubing complete all as spfd & directed |
| 70 | S&F Health faucet brass chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified |
| 71 | Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar etc. complete all as specified and directed. |
| 72 | S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls or laid in floors including fixing complete all as specified and directed. |
| 73 | S&F 110 mm bore PVC(SWR) bend/Tee any radius complete all as specified and directed. |
| 74 | S&F in repairs shower concealed stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with long shank and capstan head for (Bath shower) screwed for iron pipe and fixed including making good exisiting surfaces complete all as specified and directed. |
| 75 | S&F Black 1500X200mm Shower Panel With Thermostat Mixer with diverter In Black Finish with 3 Moveable ABS body massage jets with Moveable top Head Shower and Hand Shower with flexible hose,Brass Button spout.(CAT part no. SHP-BLK-JA011 of Jaquar or equivalent of other make) |
| 76 | Supplying & laying in trenches / wall Polyethylene (PE-AL-PE) composite pressure pipes (Inner dia 16mm) including all Crimp type internal sealing Plastic-Metal Composite fittings (such as elbows, tees, reducers, etc.) complete fixed to wall or laid in floor etc including taking up or down 15 mm GI tubing complete all as spfd & directed |
| 77 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brass bracket guard and railing 60cm long complete all as specified and directed. |
| 78 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm long fixed in repairs all as spfd and as directed. |
| 79 | Demolition reinforced cement concrete in any description and in any position complete all as specified and directed. |
| 80 | M&L Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like using cement concrete type B-0 1:2:4 complete all as specified and directed |
| 81 | S&F Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete complete all as specified and directed |
| 82 | M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed |
| 83 | Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall clading complete all as spfd and directed |
| 84 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 85 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets,fittings etc. as specified and directed. |
| 86 | S&F False Ceiling Horizontal level regular edge grid 600 x 600 mm form work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as spfd and directed. |
| 87 | S&F 5 to 8mm thick PVC hollow type wall panelling any color fixed to wall/ceiling with L or U shaped beading at ends fixed with screws complete all as specified and as directed. |
| 88 | M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling and walling with screws to timber frame work complete all as sfd and directed. |
| 89 | Dismantling of timber scantling 40 Sqcm under in section in any position, fixed with nails unframed work complete all as spfd & directed. |
| 90 | M&L for II nd class hard wood plain fillets square or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed |
| 91 | M&L for one coat of creasote oil to wooden surfaces new or old of any description including prepration of surfaces complete all as specified and directed. |
| 92 | Dismanteling of timber scantling 40 sqcm and over in section in any position for unframed works complete all as specified and directed |
| 93 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and gastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) inicluding distance pieces, cleats etc. |
| 94 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as spfd. |
| 95 | M&L for preparation of (previously treated) plastered or unplastered surfaces of walls and applying two coat of oil emulsion distemper over a coat of 1mm th wall putty any tint of walls complete all as specified. |
| 96 | M&L for one coat of synthetic enamel paint over to old wooden surface of any description exc 10 cm girth or width including prepration of old wooden surfaces complete all as specified & directed |
| 97 | M&L for one coat of synthetic enamel paint over to old steel surface of any description exc 10 cm girth or width including prepration of old steel surfaces complete all as specified & directed |
| 98 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc all as specified. |
| 99 | M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/ surface/concealed PVC conduit of suitable size, complete with all accessories/fitting, including heavy duty PVC/ABS terminal switch board floor mounted/flush type (depth not less than 45 mm) of suitable size (lengthX width) for mounting modular switches, Modular sockets, Modular regulators including PVC module top cover plate with frame of suitable size , brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified for one light point / fan point controlled by one way switch of 5/6 Amps. |
| 100 | All as per item No.98 above but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps. |
| 101 | All as per item No.98 above but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps. |
| 102 | All as per item No. 98 above but for one two way point on controlled by two way switch of 5 Amps. |
| 103 | M&L point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/ surface/concealed PVC conduit of suitable size, complete with all accessories/fitting, including heavy duty PVC/ABS terminal switch board surface mounted/flush type to wall (depth not less than 45 mm) of suitable size (lengthX width) for mounting modular switches, Modular sockets, Modular regulators including PVC module top cover plate with frame of suitable size , brass screw and washer including unsheathed single core PVC insulated cable green in colour 2.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified for 15/16 amp socket outlet point controlled by one , one way switch of 15/16 Amps complete all as specified. |
| 104 | S&F Modular switch 1 module single pole one way 6 Amps, 240 volt complete all as specified. |
| 105 | S&F Modular switch 1 module single pole one way 16 Amps, 240 volt complete all as specified. |
| 106 | S&F Modular socket outletn, 2 module, 3 pin 5/6 Amps, 240 volt complete all as specified. |
| 107 | S&F Modular socket out let, 2 module, two in one 3 pin 5/6 Amps and 3 pin 15/16 amp , 240 volt, complete all as specified. |
| 108 | Supply & fixing modular Bell Push 6A,(1 or 2 module as per site requirement), 240 volts complete all as specified & directed. |
| 109 | Supply & fixing modular Two way switch 6A,(1 or 2 module as per site), 240 volts complete all as specified & directed. |
| 110 | S&F in repairs of Bell ding dong type complete all as specified and directed. |
| 111 | S&F ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified. |
| 112 | S&F stepped type electronic fan regulator modular type ,2 module,240 volt complete all as specified. |
| 113 | S&F in repairs LED tube ligh white 4' long along with all fixtures and fittings, internally pre wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size, 20W complete all as specified. |
| 114 | Supply and fixing LED lights fitting mirror type with high out put diffuser with golden finidh 2 feet,1x 10/12 W, 220V, AC decorative type with driver, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. |
| 115 | S&F LED Bulb/LED retrofit 'T' bulb 12 watts, B22 end cap complete all as specified. |
| 116 | S&F in repairs LED bldg security lights of 30/35 Watt having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W, IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 and mounting on GI bracket incl connecting up with three core twisted flexible copper conductor cable complete all as specified and directed |
| 117 | S&F in repairs security light bracket made out of light grade 25 to 32mm dia GI pipe of length 0.9 mtr bend to shape and mounting on wall using clamps nut bolts etc complete all as specified and directed. |
| 118 | S&F in repairs Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED all as specified and directed.lamp B22 base. |
| 119 | Sypply and fix UP and Down Full -K telescope wall light 6 wall all as speciified and directed. |
| 120 | Sypply and fix recessed type LED down light panel 5/6 watt warm white ,100 Lm/watt with inbult driver completel all as speciified and directed. |
| 121 | S&F in repairs Energy saving, surface mounted, bulk head LED luminaire 10/12 W with Polycarbonate housing and diffuser complete including connecting up with cordflexible copper conductor cable of suitable size complete all as specified an directed. |
| 122 | S&F in repairs DB TPN 4 way sheet metal enclosures double door 415 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar of rating not less than 200Amps, insulated neutral bar, earth bar and cable ties for cable management complete all as specified and directed. |
| 123 | S&F sheet metal enclosure for DB SPN 12 way with 200 Amp rated bus bar 240 Volts, Double door suitable for housing MCBs and isolators complete all as specified and directed |
| 124 | S&F in replacement MCB SPN 40-63 Amps, 240volts, 10KA, C Curve complete all as specified and directed. |
| 125 | Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, 240V, 10 KA 'B' curve type, in the MCB DB complete with connection testing and commissioning complete all as specified. |
| 126 | S&F MCB 4 pole 40 to 100 Amps, 240volts 10KA complete all as specified. |
| 127 | Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket including industrial plug 3 pin 20 Amp, complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall of fixed on surface of wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed . |
| 128 | Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed /surface conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed.( Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length). Make- Plaza/Grandlay/HPL |
| 129 | Material and labour for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4 Sqmm for Phase and neutral + o1 single core cable of 4.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed /surface conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed.( Note - One meter of conduit along with 2x4.0 Sqmm wire and one 4.0 sqmm earth wire shall be measured as one length). |
| 130 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick, buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, conneted to galvanised earth wire 4.0 mm dia by means of bolts, nuts, cheek nuts and washers of galvanised or iron protected by 15 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifitting made out of 8 mm dia MS bar, funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009. |
| 131 | Taking down exhaust fan of any size from existing position, dismantling, overhauling and cleaning throughly, oiling/greasing and re- assemble after replacing unsv parts etc and rehanging the same duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified.Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below. |
| 132 | Disconnecting electrically, taking down ceiling fan from existing position, dismantling blades, servicing by cleaning oiling /greasing, replacing unsv parts, split pins, check nuts, rubber seal etc, reassembling and rehanging at same or new locations duly connected with new cordflexible copper conductor cable of size 23/.0076 from ceiling rose and testing complete all as specified & directed.Note: Spare parts other than specified will be measured and paid separately under respective items. |
| 133 | Rewinding of AC ceiling fan motor 1200/1400 mm sweep any make with super enamelled copper winding wire of 35SWG gauge, sleeve work, varnishing with `B' class insulation varnish, connection with flexible wire of appropriate size two core copper wire upto connector block including cutting and taking out old burnt Al/Cu winding wire complete all as specified and directed. Note : (i) Rewinding should be done at workshop |
| 134 | Supply and fix wall decorative Bamboo light any type as per requirement including holder to fix Led bulb all as specified and directed. |
| 135 | Supply and fixing LED luminaire 600 mm x 600 mm panel, 36 watt, 220 V AC recessed type with high efficiency PC diffuser soft glare free bright white/warm white light complete with driver, suitable for roof ceiling including connecting up with cord flexible copper conductor cable of suitable size complete all as specified. |
| 136 | Supply and fixing pressure booster pump 0.5 Hp suitable for 25 mm Size pipe, 220 volt , fully automatic driven complete all as specified and directed. |
| 137 | Supply and fix Bus bar chamber wall mounter / Floor mounted with MCB 4 pole 100 Amp all as specified and directed. |
| 138 | Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. |
| 139 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and geting out complete all as specified and directed. |
| 140 | Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed. |
| 141 | Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed. |
| 142 | Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in 25mm thick layer complete all as specified and as specified. |
| 143 | Removal of surplus excavated soil to a distance exc50 m but not exc in 100 m and deposited wher directedat a leveln exc 50 m above the starting point complete all as specified. |
| 144 | Supply / laying and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. |
| 145 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 225 CMM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC). |
| 146 | Supply and fix exhaust fan made ofsturdy Engineering plastic complete with louvers shutter, making suitable size hole, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm all as specified and dirtected. |
| 147 | Suply and fixing USB charger 30 watt 2 module all as specified abd directed |
| 148 | Rewinding of exhaust fan motor of size 230 to 300 mm sweep any make with super enamelled copper winding wire of 32SWG gauge, sleeve work, varnishing with `B' class insulation varnish, connection with flexible wire of appropriate size two core copper wire upto connector block including cutting and taking out old burnt Al/Cu winding wire complete all as specified and directed. Note : (i) Rewinding should be done at workshop Please Enable Macros to View BoQ information |
