|
| 1 | Surface excavation n exc 30 cm deep & avg 15 cm and getting out in hard / dense soil complete all as directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan area in hard / dense soil and getting out complete all as specified and directed. |
| 3 | M & L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 4 | M&L for hard core of broken stone or boulder, gauge n exc 63mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surfaces complete all as specified and directed. |
| 5 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 6 | S&F TMT bars 5 mm to 10mm dia as in stirrups / spacers / binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 7 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in foundation, footing, mass concrete, foundation beam, plinth beam and base for column complete all as specified and directed. |
| 8 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 9 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 10 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in chajja and the like complete all as specified and directed. |
| 11 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in slab supported on wall ,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 12 | Use & waste for flat formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits if any of foundations and plinth beams and similar work, etc, rough finished surfaces of concrete etc all as specified and directed |
| 13 | Use & waste for flat form work to sides of pillars, posts struts, piers columns and stanchions, square, rectangular or polygonal rough finished surfaces of concrete etc all as specified and directed |
| 14 | Use & waste for flat formwork to sides of concrete beams, cantilevers, bressummers, lintels over 1.5m span and similar work, etc, rough finished surfaces of concrete etc all as specified and directed |
| 15 | Use & waste for flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat surface, rough finished surfaces of concrete etc complete all as specified and directed |
| 16 | Use & waste for flat form work to sides of chajja and the like, flat surface, rough finished surfaces of concrete etc all as specified and directed |
| 17 | Returning, filling in incl spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified & directed. |
| 18 | Removing excavated material to a distance n exc 50 mtr and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified & directed. |
| 19 | M & L for full brick or more thick Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed. |
| 20 | M & L for half brick thick brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 using old size brick complete all as specified and directed. |
| 21 | M & L for rendering 10 mm thick cement plastering on wall surfaces in cement mortar 1:6 on other than fair face of brick-work or concrete surface and finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 22 | M & L for rendering 15 mm thick cement plastering on wall surfaces in two layers (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 23 | M&L for rendering 5 mm thick cement plastering on ceiling surfaces in cement mortar 1:3 on concrete surface, finished the surface even and fair without using extra cement complete all as specified and directed. |
| 24 | Supply only water proofing compound complete all as specified and directed. |
| 25 | M&L for applying two mm thick wall care putty on wall / ceiling as recommended by the manufacturer complete all as specified and directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ). |
| 26 | M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper of any colour or tint as approved by GE over a coat of primer complete all as specified and directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ). |
| 27 | M&L for preparing new plastered surfaces in ceiling and applying three coats of white wash complete all as specified and directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ). |
| 28 | M&L for preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as recommended by the manufacturer all as specified and as directed (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ). |
| 29 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 30 | M&L for drilling holes ,dia and depth of hole shall exc. 25mm but n.exc. 40 mm tappered (with standard or gas thread) complete all as specified and directed. |
| 31 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be measured and paid separately) |
| 32 | Supply and fixing factory made uPVC door frame made of uPVC, extruded sections having an overall dimension (extruded section profile) 125 x 70 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the |
| 33 | S & F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 34 | S & F 150 mm long aluminium anodised barrel tower bolts with of extruded section and fixed complete all as specified and directed. |
| 35 | S & F 150 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 36 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 37 | S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140 mm complete all as specified and directed. |
| 38 | S&F factory made uPVC white / colour sliding window, area not exceeding 2.00 sqm each, three track made of extruded profiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners including necessary Hardware like Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured lor payment purpose.) |
| 39 | S&F UPVC ventilator with framework made out of multichamber hollow PVC section DWUF 405 (40x46mm) of sintex or equivalent section of other make as per make list. 3mm thick pin headed glass shall be fixed with frame in the lower section using extruded PVC section having a dimension of 9mm x 14.5mm (GL-19 PVC section of Sintex or equivalent section of other make as per make list ) with EPDM gasket (SPL-003 of sintex or equivalent section of other make as per make list) for both the PVC sections. Mullion of ventilator shall be made up of multichamber hollow PVC section DWUF 406 (63.5x40mm) of sintex or equivalent section of other make as per make list, shall be fixed with EPDM gasket. GL-19 or equivalent section shall be fixed to the three side of DWUF 405 or equivalent and one side of DWUF 406 or equivalent above the centre mulion. Glass panel of aluminium lower set to be fixed to the frame DWUF 405 or equivalent on the top of the ventilator to the glass. DWUF 405 or equivalent and DWUF 406 or equivalent corners shall be mitred cut, joineted and welded with 12mm square guard bar complete all as specified and directed. |
| 40 | S & F4.80 mm thick, sheet glass, ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 41 | S&F Harrison rails of mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 42 | S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings, framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed. |
| 43 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrom primer, complete all as specified and directed. |
| 44 | M&L 18 to 20 mm thick Granite stone slabs (Black/Ruby Red) work (table rubbed and polished) as in cooking platforms/ floors bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing types including screed bed 15 mm thick in cement mortar 1:6, complete all as specified and as directed. |
| 45 | M & L for virified ceramic tiles, double charged, light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 46 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 47 | M & L for 40 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in flooring, finished the surface even and smoothusing extra cement complete all as specified and directed. |
| 48 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base of floor finished the surface fair and rough to receive subsequent layer complete all as specified and directed. |
| 49 | M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 50 | M & L for 20-25mm thick machine cut kota stone slab flooring laid over and including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade including rubbing and polishing complete all as specified and directed. |
| 51 | M & L for 20-25mm thick machine cut kota stone slab as in dado / skirting / riser of step etc as in vertical surfaces laid over and including 10 mm thick bedding layer / backing coat in cement mortor 1:3 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade including rubbing and polishing complete all as specified and directed. |
| 52 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 including necessary formwork complete all as specified and directed. |
| 53 | M & L for cleaning of surface thoroughly from dust & dirt and cement slurry @ 3 Kg / Sqm shall be applied thoroughly. The provide 10 mm thick screed bed in CM 1:4 mixed with integral water proofing compound as per manufacturer's instructions, after setting and drying cement mortar, the entire surface of the roof slab shall be cleaned thoroughly to remove all loose particle / dust / dirt particle and applying a coat of hot blown grade bitumen primer grade 85 / 25 @ 1.20 Kg Par Sqm shall be applied over priming surface. APP based polymeric membrane of minimum weight 3 Kg/Sqm and a minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150gms/Sqm) shall be laid on roof and on vertical surface upto and insert in grooves and packed in CM (1:3) with overlaps in membrane 100mm, The over laps shall be sealed by flames or as per manufacturer's instructions. and finally it will be finished with two coats of bituminous based aluminium paint including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete all as specified and directed.(Note: Integral water proofing compound shall be measured and paid separately in Supply only item.) |
| 54 | S&F 20 mm CPVC pipes SDR 11 shall be fixed with requisite special type of fittings on walls(conceled) & ceiling or laid in floors for internal water supply complete all as specified and directed.(Note: Necessary special fittings shall be measured and paid under relevant supply only items.) |
| 55 | S&F 25 mm CPVC pipes SDR 11 shall be fixed with requisite special type of fittings on walls(conceled) & ceiling or laid in floors for internal water supply complete all as specified and directed.(Note: Necessary special fittings shall be measured and paid under relevant supply only items.) |
| 56 | Supply only 20mm brass elbow for jointing CPVC pipe all as specified and directed. |
| 57 | Supply only 20mm brass elbow (3/4 X ½) for jointing CPVC pipe all as specified and directed. |
| 58 | Supply only 20mm brass Tee for jointing CPVC pipe all as specified and directed. |
| 59 | Supply only 20mm male brass threaded adaptor (MTA/ MBTA) for jointing CPVC pipe all as specified and directed. |
| 60 | Supply only 20mm female brass threaded adaptor (FTA/ FBTA) for jointing CPVC pipe all as specified and directed. |
| 61 | Supply only 20mm Union for jointing CPVC pipe all as specified and directed. |
| 62 | Supply only CPVC reducer, size 1/2\\" to 2' for plumbing fittings complete all as specified and directed. |
| 63 | Supply only 25mm brass elbow for jointing CPVC pipe all as specified and directed. |
| 64 | Supply only 25mm brass Tee for jointing CPVC pipe all as specified and directed. |
| 65 | Supply only 25mm male brass threaded adaptor (MTA/ MBTA) for jointing CPVC pipe all as specified and directed. |
| 66 | Supply only 25mm female brass threaded adaptor (FTA/ FBTA) for jointing CPVC pipe all as specified and directed. |
| 67 | Supply only 25mm Union for jointing CPVC pipe all as specified and directed. |
| 68 | Supply only 25mm tank adopter for jointing CPVC pipe all as specified and directed. |
| 69 | S & F fancy type Bib taps with wall flange, cromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete complete all as specified and directed. Make: Jaquar Cat Part No. FUS-29037 or Equivalent make as per list of Makes in PS. |
| 70 | S & F fancy type Two way Bib taps with wall flange, cromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.Make: Jaquar Cat Part No. FUS-29041 or Equivalent make as per list of Makes in PS. |
| 71 | S & F in repair table top basin with fixing accessories, vitreous china , size 700 x 435 x 135 mm excluding taps, waste, chain and plug and porcelain stopper but including supply and fixing of 32mm dia bore brass chromium plated waste coupling complete all as specified and directed. Make: Jaquar Cat Part No. ARS-WHT-39903 or Equivalent make as per list of Makes in PS. |
| 72 | S & F in repair CP Basin Mixer Single Lever Tall Boy with 150mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses Make: Jaquar Cat Part No. FUS-29005NB or Equivalent make as per list of Makes in PS. |
| 73 | S & F in repair soap dispenser with glass bottle complete all as specified and directed. Make: Jaquar Cat Part No. CAN-1135N or Equivalent make as per list of Makes in PS. |
| 74 | S & F in repair glass shelf 600mm long complete all as specified and directed. Make: Jaquar Cat Part No. CPA-1171 or Equivalent make as per list of Makes in PS. |
| 75 | S & F in repair corner glass self (with bracket) complete all as specified and directed. Make: Jaquar Cat Part No. CPA-1173 or Equivalent make as per list of Makes in PS. |
| 76 | S & F in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange complete all as specified and directed. Make: Jaquar Cat Part No. FUS-29281or Equivalent make as per list of Makes in PS. |
| 77 | S&F in repair Overhead Shower 180mm dia Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System complete all as specified & directed.Make: Jaquar Cat Part No. OHS-1755 or Equivalent make as per list of Makes in PS. |
| 78 | S & F Health Faucet spray with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified & directed Make: Jaquar Cat Part No.ALD-565 or Equivalent make as per list of Makes in PS. |
| 79 | S&F in repair of CP fancy type angular stop cock 15mm dia with wall flange complete all as specified & directed.Make: Jaquar Cat Part No.FLR-5053N or Equivalent make as per list of Makes in PS. |
| 80 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 81 | S&F CP towel ring square with round flange complete all as specified & directed.(Make: Jaquar Cat Part No. ACN-1121N or Equivalent make as per list of Makes in PS.) |
| 82 | S & F Single Towel Rail 600mm Long, Stainless Stee complete all as specified & directed. (Make: Jaquar Cat Part No. ACN 1111SM or Equivalent make as per list of Makes in PS.) |
| 83 | S & F Toilet paper Roll Holder with Stainless Steel Flap complete all as specified & directed. (Make: Jaquar Cat Part No. ACN-1153S or Equivalent make as per list of Makes in PS.) |
| 84 | S & F bottle trap 32mm size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified & directed. (Make: Jaquar Cat Part No. ALD-769L300x190 or Equivalent make as per list of Makes in PS.) |
| 85 | S&F PVC / Polyester vertical window Blinds for office with all necessary fixing items etc complete all as specified and directed. |
| 86 | S & F Aluminium extruded section body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 87 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. |
| 88 | S&F plastic seat cover white for EWC, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 89 | S & F 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. |
| 90 | S&F PVC flush pipe 32mm outer dia 1.20m long complete all as specified and directed. |
| 91 | S&F 75mm dia cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 92 | S&F 75mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 93 | S&F 600 mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers. Complete all as specified and directed. |
| 94 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including necessary brackets / clamps complete all as specified and directed. |
| 95 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including necessary brackets / clamps complete all as specified and directed. |
| 96 | S&F 110mm bore PVC (SWR) bends any type complete all as specified and directed. |
| 97 | S&F 75mm bore PVC (SWR) bends any type complete all as specified and directed. |
| 98 | S & F rotational moulded polyethylene water storage tanks of capacity 1000 litres, double layer construction, ISI marked ,(Cylindrical vertical with closed top), hoisted and fixed in position with and including 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 210 gms) complete all as specified in SSR Part I and as directed. |
| 99 | S & F 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed. |
| 100 | M&L for providing and injecting chemical emulsion for post construction anti-termite treatment along the external perimeter of wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 101 | M&L for providing and injecting chemical emulsion for post construction anti-termite treatment of soil under existing floors using emulsion @ one litre per hole 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. Please Enable Macros to View BoQ information |
| 102 | M&L for providing and injecting chemical emulsion for post construction anti-termite treatment of soil under existing floors using emulsion @ one litre per hole 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. Please Enable Macros to View BoQ information |
