|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed. |
| 2 | All as per item No 1 above but exc. 1.5 Sqm and n.exc. 4 Sqm each complete all as specified and directed.. |
| 3 | Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed. |
| 4 | All as per item No 3 above but exc. 1 Sqm and n.exc. 2 Sqm each complete all as specified and directed.. |
| 5 | Material and labour for cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and direcrted. |
| 6 | Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed. |
| 7 | Supply and fixing for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed. |
| 8 | Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 9 | Supply and fixing for aluminium anodized handle of extruded section 125mm long complete all as specified and directed. |
| 10 | Supply and fixing for 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21complete all as specified and directed. |
| 11 | Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay including 10 mm guard bars , complete with glazing bars, dovetailed or welded (to receive glazeed and gauzed) complete all as specified and directed. |
| 12 | Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed. |
| 13 | Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 14 | Material and labour for providing PCC 1:3:6 type C-0 using 12.50mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and directed. |
| 15 | Supply and fixing for 35mm thick 1st class softwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members complete all as specified and directed. |
| 16 | Supply and fixing for 30 mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 17 | Supply and fixing for 300mm aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 18 | Supply and fixing for 200 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 19 | Supply and fixing for 150 mm Extruded aluminium alloy handles, fabricated type, anodisedcomplete all as specified and directed. |
| 20 | Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed. |
| 21 | M S butt hinges 100 mm medium weight, cold rolled mild steel, and fixed. |
| 22 | Supply and fixing for 3 mm thick Sheet glass,selected quality and glazing with oil putty in square n exc 0.5 sq. m in each panel including necessary clipping complete all as specified and directed. |
| 23 | Material and labour for preparation of new or previously untreated surfaces of wood of any description and two coat of synthetic enamel paint over a coat of pink primer, not otherwise descri-bed,over 10cm width or girth complete all as specified and directed. |
| 24 | Supply and fixing in repair MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair all as specified and directed. |
| 25 | Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint.complerte all as specified and directed. |
| 26 | Supply and fixing in galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 27 | Dismantling wrought iron or mild steel work of any description not otherwise provided . |
| 28 | Supply and fixing for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats upto the height 12m of approved etc. Fe-410-W(Gde-E-250) quality-B complete all as specified and directed. |
| 29 | Material and labour for preparation of new steel surfaces of any description two coats of synthetic enamel paint over a coat of red oxide primer on steel Surfaces of any description, over 10cm in width or girth,not otherwise described including complete all as specified and directed. |
| 30 | Material and labour for perparation of new steel surface of any description two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces , n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed. |
| 31 | Material and labour for preparation of plastered or unplastered old distempered surfaces of wall including pilasters and cornices and applying one coat of oil emulsion distemper (any tint) complete all as specified and directed. |
| 32 | Material and labour for preparation of plastered or unplastered old distempered surfaces of ceiling including pilasters and cornices and applying one coat of oil emulsion distemper (any tint) on ceiling complete all as specified and directed. |
| 33 | Material and labour for preparation of plastered or unplastered old decorated surfaces of walls applying one coat of cement base paint upto the height 12m of approved make & colour complete all as specified and directed. |
| 34 | Material and labour for preparation of old steel surfaces of any description over 10cm girth or widhth no otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 35 | Hacking out old broken glass (any thickness,size quality or description) from wooden/steel frames or stone concrete or brick surrounds glazed with putty or fixed with walls complete all as specified and directed . |
| 36 | Supply and fixing of 3 mm thick figured sheet glass ordinary quality with silicon gel and oil putty all around the glass in square n exc. 0.5sq m in each pane including necessary clipping complete all as specified and directed. |
| 37 | Supply and fixing in repair of 3 mm thick Sheet glass,selected quality and glazing with oil putty in square n exc 0.5 sq. m in each panel including necessary clipping complete all as specified and directed. |
| 38 | Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.. |
| 39 | Material and labour for providing PCC 1:4:8 type D-2 using 40 mm graded stone agg.as in foundation or mass concrete complete all as specified and directed. |
| 40 | Material and labour for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all directed. |
| 41 | Material and labour for providing 75mm thick PCC 1:3:6 type C-2 as in plinth protection fixed even and smooth with out using extra cement complete all as specified and directed. |
| 42 | Supply and fixing for glass dividing strips, 3 mm thick 38 mm wide inserted in position, conform to design complete all as specified and directed. |
| 43 | Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises complete all as specified and directed. |
| 44 | Material and labour brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed. |
| 45 | All as per item seriral no 44 but for except brick complete all as directed. |
| 46 | Taking down cement plaster on brick walls ceiling and chajjas ,including hacking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 47 | Material and labour for internal plastering 10 mm thick on fair faces of brick or concrete surfaces, in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed . |
| 48 | Material and labour for rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces using WPC @3% by weight of cement complete all as specified and directed. Note:- WPC shall be measured and paid separately. |
| 49 | Supply and fixing only for integral waterproofing compound complete all as specified and directed. |
| 50 | Material and labour for rendering 5mm thick cement plaster 1:3 on fair faces of concrete surfaces in ceiling complete all as specified and directed. |
| 51 | Material and labour for two coats of oil bound distemper over a coat Chalk whiting, on plastered surfaces, prepara-tory to distempering on walls including preparation of new surfaces complete all as specified and directed. |
| 52 | Material and labour for applying two coats of white wash on ceiling including preparation of new surfaces complete all as specified and directed. |
| 53 | Material and labour for two coat of cement based paint over a coat of Priming plastered and other surfaces with alkali resistant priming paint on newly plastered surfaces of walls incl preparation of surfaces complete all as specified and directed. |
| 54 | Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 55 | Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 56 | Material and labour for glazed ceramic tiles (coloured) 600x300x7mm/450x350x7 thick on vertical surfaces set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over & including 10mm thick rendering CM 1:4 complete all as specified and directed. |
| 57 | Material and labour for vitrified tiles 10 mm thick jointed free squarere/rectangular) light shade area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over & including 15mm thick screed bed CM 1:6 complete all as specified and directed. |
| 58 | Material and labour for vitrified tiles 10 mm thick jointed free as in skiriting squarere/rectangular) light shade area of each tile tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over 15mm thick rendering CM 1:4 complete all as specified and directed. |
| 59 | Material and labour for non - skid ceramic coloured tiles 7 to 8 mm thick jointed free squarere/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over & including 15mm thick screed bed CM 1:6 complete all as specified and directed. |
| 60 | Material & labour Non - skid ceramic coloured tiles 7 to8 mm thick jointed free as in skiriting squarere/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over & including 15mm thick rendering CM 1:4 complete all as specified and directed. |
| 61 | Material and labour for on machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including scred bed of 20 mm in CM 1:6 complete all as specified and directed. |
| 62 | Material and labour for pre polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed 15mm thick rendring in CM 1:4 complete all as specified and directed. |
| 63 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone,concrete wall and slabs complete all as specified and directed. |
| 64 | Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 65 | Taking up or down steel tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 66 | Supply and fixing for 15 mm bore GI tubing medium grade to walls, ceiling or laid in floors complete all as specified and directed. |
| 67 | Supply and fixing for 20 mm bore GI tubing medium grade to walls, ceiling or laid in floors complete all as specified and directed. |
| 68 | Supply and fixing in repair 15mm dia CP bib taps, fancy, Cast copper alloy with crutch or butterfly handle, screwed for iron pipe fixed complete all as specified and directed. |
| 69 | Supply and fixing in repair 15 mm dia CP fancy type angle cock, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed. |
| 70 | Supply and fixing in repair 15 mm dia CP fancy type angle valve two in one, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed. |
| 71 | Supply and fixing in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts screwed for iron pipe complete all as specified and directed.. |
| 72 | Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 73 | Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 74 | Supply and fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 4mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 75 | Supply and fixing in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 76 | Supply and fixing in repair tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 77 | Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern 10 Ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe complete all as specified and directed. |
| 78 | Supply and fixing in repair vitreous china squatting pan, `Orissa' pattern, size 630 x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 79 | Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern), white incl pvc seat and cover (including 6 mm dia 50 mm long fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut) including all fixture acomplete all as specified and directed. |
| 80 | Supply and fixing in repair vitreous china wash basin, white, flat back, size 450x300mm excluding taps, waste chain and plug and porcelain stopper but including brackets 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other fixed complete all as specified and directed. |
| 81 | Supply and fixing in repair of CP jet spray with flexible tube 1.5 mtr long complete all as specified and directed. |
| 82 | Supply and fixing in repair of CP Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 83 | Supply and fixing in repair of curtain rod, mild steel, chromium plated of 20 mm dia with two no of bracket & final per running meter all as specified and directed. |
| 84 | Supply and fixing in repair CP grating 110 dia complete all as specified and directed. |
| 85 | Dismantling plain or corrugated fibre sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed. |
| 86 | Supply and fixing for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 87 | Supply and fixing for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 88 | Taking down rolling shutters push/pull type and removing all in position complete all as specified and directed. |
| 89 | Taking down rolling shutters push/pull /gear type and removing all denting, bending & greasing, tightening the springs and refixed in position complete all as specified and directed. |
| 90 | Supply and fixing for steel rolling shutters with thickness of lathes 1.00mm thick with ball bearing as specified with ventilating portion including top cover anchoring rod, hasp & staple & one shop coat of red oxide primer. Created in position as indicated for push pull or manhole type fixed as in repair complete all as specified and directed. |
| 91 | All as per item serial no 90 but for 1.25mm thick gear operated type with level gear box & crank hands complete all as specified and directed. |
| 92 | Supply and fixing in repair PVC (SWR) 110 mm bore of pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 93 | Supply and fixing in repair PVC (SWR) 110 mm bore of bends any radius complete all as specified and directed. |
| 94 | Material and labour for cutting or uprooting grass on old mud phuska, removing rubbish off the premises, cleaning surface and preparing to receive new mud plaster. complete all as specified and directed. |
| 95 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 96 | Demolition of mud in roofs , any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 97 | Roughening surfaces of old concrete floor etc by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 98 | Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. |
| 99 | Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement. complete all as specified and directed. |
| 100 | Material and labour for rendering 15 mm thick external using cement plaster in CM 1:3 on fair faces of brick/concrete work surfaces complete all as specified and directed. |
| 101 | Material and labour for High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane with following specifications: (a) Elongation of range 400% to 600%. (b) Tensile strengthof 8-12N/mm2. (c) Crack bridging ability of 3.00-4.00mm. (d) Hardnes (Shore \\"A\\" ASTM D2240) of range 50-70.The application shall include final base preparation, epoxy primer application in rato 1.1 (resin: hardner) with 100% water dilution and application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer. A sample has to be prepared by applicator before starting of work on ground and this sample to be approved by GE. Make- SIKA/FOSROC/Asian Paints/Berger.Note:- (a) The defect liability period of water proofing treatment to RCC roof slab including sunken floor shall be 10 years and the contractor shall be responsible to keep the entire building(s) free From leakage/seepage for a period of 10 years after certified date of completion. The contractor may obtain a similar guarantee from the specialist firm engaged by him for the purpose. (b) Contractor has to bring entire quantatity (as per manufacturer instruction for coverage area per unit of material) of water proofing material in one go and to be deposited in MES store. MES JE will issue material for use at site on daily basis and all empty cane shall be kept in MES store untill entire work of water proofing is completed as per CA.(c) Contractor shall submit original purchase voucher as soon as material arrived at site, for verification of required quantity of material as per manufacturers instruction. |
| 102 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces.Complete all as specified and directed |
| 103 | Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 104 | Dismantling water tanks of capacity exc 250 ltrs and n exc 500ltrs and removing to store complete all as specified and directed. |
| 105 | Dismantling water tanks of capacity exc 500 ltrs and n exc 1000 ltrs and removing to store complete all as specified and directed. |
| 106 | Supply and fixing for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltrs.20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 107 | Supply and fixing for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs.20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 108 | Supply and fixing in repairs Brass CP centre hole basin mixer complete all as specified, make - Johnson or equivalent in repair complete all as specified and directed. |
| 109 | Supply and fixing in repair soap dish stainless steel, approximate size 160x 100mm fixed to plug with chromium plated brass screws complete all as specified and directed.. |
| 110 | Supply and fixing for in repair viterous china urinal half stall complete including providing fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement fixing with bracket flush pipe grating and union for discharge pipe including CP spreader and waste pipe complete all as specified and directed. |
| 111 | Material and labour for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust loose paint etc by skilled labour upto the ht of 6 m complete all as specified and directed. |
| 112 | Material and labour for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 1mm over the plastered / old painted wall after scraping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc, by skilled labour as per following steps. Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat the prepered mixer with the help of fully autometic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3 :- Allow 6-8 hrs time to dry the putty surface. |
| 113 | Material and labour for one coat of acrylic water based exterior grade primer on wall @ 0.9 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully autometic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI allow 6-8 hrs to dry the surface for painting of subsequent coats upto the height of 6m complete all as specified and as directed. |
| 114 | Material and labour for two coat water based premium acrylic smooth exterior emulsion on wall of approved colour with silicon addive & color stay technology, Excellent dirt pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti algal properties in two coats @ 1.79 litre (undiluted) / 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully autometic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI upto the height of 6m. Allow 6-8 hrs to drt the surface in both the coats of paint complete all as specified and directed. Please Enable Macros to View BoQ information |
