|
| 1 | B/R PORTION |
| 2 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and as directed. |
| 3 | Taking down roof trusses, coupled rafters or trussed beams clear span above 4 m to 8 m etc complete all as specified and as directed. |
| 4 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion (embedded in natural ground) and making good disturbed ground complete all as specified and directed. |
| 5 | Dismantling timber scantlings unframed work under 40 sq. cm in section as in fillets, rails, posts, rafters, purlins, etc. complete all as specified. |
| 6 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and scantaling complete all as specified and directed. |
| 7 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed. |
| 8 | Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillers, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete as specified and directed. |
| 9 | M&L for brick work with sub-class 'B' bricks, straight or curved on plan to any radius in full brick thick walls, built in cement mortar (1:6) complete as specified and directed. |
| 10 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick plaster in two layers (10mm+5mm) on brick or concrete surfaces in CM (1:4) mixed with WPC on second layer finished the surface even and smooth without using extra cement complete all as specified and directed. (Note- supply only WPC shall be measured and paid seperately). |
| 12 | Supply only liquid water proofing compound |
| 13 | M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed. |
| 14 | M&L for prepartion of newly plastered surfaces of walls and applying two coats of water based distemper over a coat of 3mm thick wall care putty including primer complete all as specified and directed. |
| 15 | M&L for preparation of newly plastered surfaces of wall and applying two or more coats of acrylic smooth exterior paint of required shade for new work @ 1.67ltr/10Sqm over and including priming coat of exterior primer @ 2.20ltr/10Sqm complete all as specified and as directed. |
| 16 | S&F Mild steel framed work such as grills, gratings etc.with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed. |
| 17 | S&F Pre-painted galvalume aluminium zink coating GI based corrugated/ semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 18 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as iridges, hips, valley cutters, eave board etc fixed with self tapping screws complete all as specified and as directed. |
| 19 | S&F mild steel work in tubular trusses /purlins /rafts/post etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1239 complete as specified and directed. |
| 20 | M&L for Rolled mild steel plates (plain or chequered), channels, square cut or notched (ordinary or counter sunk) forming holes, with riveted, bolted or welded attachment etc, conforming to Fe-290 Gde E-165 compete as specified and directed |
| 21 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n.exe 10cm long and dia of neck 11 to 15mm complete all as specified and directed. |
| 22 | M&L for preparation of new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed. |
| 23 | Taking down chowkats or frames (without taking off shutter from the frame) not exc. 1.5 sq.m each and removing complete all as specified and as directed. |
| 24 | Taking down chowkats or frames (without taking off shutter from the frame) exc. 1.5 sq.m but not exc. 4 sqm each and removing complete all as specified and as directed. |
| 25 | S&F 1.25 mm thick pressed steel door frames of size 125 mm x 60 mm with one or more rebated including necessary fixing lugs, hinges, lock strike plate, etc including filling PCC M-15 (1:2:4) in hollow portion etc complete all as specified and as directed. |
| 26 | S&F 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commerical type on both sides complete all as specified and directed. |
| 27 | S&F 35 mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles, prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 clause 8.24(a) and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.(Note :- S & F Glass/gauge shall be measured and paid for separately) |
| 28 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 29 | S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 30 | S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed. |
| 31 | S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed. |
| 32 | S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 33 | S&F in repair mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as directed. |
| 34 | M&L for preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 35 | M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 36 | Supply only 4 mm thick frosted sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 37 | M&L for RCC (nominal mix) (1:2:4) type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note :- Reinforcement & formwork shall be measured and paid separately under respective items. |
| 38 | M&L formwork to rough finished surfaces of flat concrete, sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified. |
| 39 | M&L for TMT bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 40 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 41 | M&L for Sand filling under floor or in foundation /road side berms, embankments etc as in sand cushioning including watering and consolidation complete all as specified and as directed. |
| 42 | M&L for hardcore of broken stone or boulders hard core of gauge n.exc. 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 43 | M&L for providing 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in sub base and plinth protection and paving finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 44 | M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15 mm thick CM (1:6) complete all as specified and as directed. |
| 45 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 46 | M&L for providing and injecting chemical emulsion for post constructional and termite treatment alongwith external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc and finished upto delivered level in apron complete all as specified and as directed. |
| 47 | M&L for providing post constructional anti termite treatment by making hole of 12mm dia to be drilled at 300mm apart at the junction of external and internal wall with floor and construction /expansion joint , if any, ground floor only and pouring the emulsion at the rate of one litre per hole and plugging the same with white or coloured cement to match the existing surfaces complete all as specified and as directed |
| 48 | M&L for providing anti termite treatment at points of contact of wood work such as chowkats of wooden doors, window, ventilators, loft, wardrobes, etc by chemical emulsion (in oil or kerosin based solution) @ 0.5 ltr/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc complete all as specified and as directed. |
| 49 | S&F factory made soild PVC double door frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet but single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with MS tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed. |
| 50 | S&F Factory made solid PVC moulded door shutter, 28 to 30 mm thick (style), with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying and fixing in frame at site as all as per specifications and drawings as applicable to item 08101 given in SSR Part – II complete all as specified and as directed. |
| 51 | S&F 125 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 52 | M&L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed. |
| 53 | S&F in repair Rimless Back to Wall WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set, Size: 360x575x410 mm, P Trap-180 mm all as specified and as directed Make-JAQUAR CAT No-ONS-WHT-10955P180UFSM or equivalent make as specified in particular specification |
| 54 | S&F in repair Metropole Flush Valve Regular 40mm Size (Concealed Body) with Exposed Shut Off Provision & Round Flange all as specified and as directed Make-JAQUAR CAT No-FLV-1093N or equivalent make as specified in particular specification |
| 55 | S&F in repair Wall Mixer 3-in-1 system with provision for both Hand Shower and Overhead Shower Complete with 115 mm long Bent Pipe, Connecting Legs & wall flange (without Hanh & overhead Shower) all as specified and as directed Make-JAQUAR CAT No-SOL 6281 or equivalent make as specified in particular specification |
| 56 | S&F in repair Hand Shower 32mm round shape straight design dual flow (ABS Body & face plate chrome plated) with rubit cleaning system with easy flex tube in chrome finish 1.5m long with nuts all as specified and as directed Make-JAQUAR CAT No-HSH-5541 or equivalent make as specified in particular specification |
| 57 | S&F in repair Maze overhead shower 200x200mm squre shape single flow (body & face plate stainless steel with chrome finish) with rubit cleaning system with Shower Arm 400X25X25mm Square Shape for Wall Mounted Showers with Flange all as specified and as directed Make-JAQUAR CAT No-OHS-CHR-1619 or equivalent make as specified in particular specification |
| 58 | S&F in repair 15 mm Angular stop cock with wall flange all as specified and as directed. Make-JAQUAR CAT No-FUS-29053 or equivalent make as specified in particular specification |
| 59 | S&F in repair Table top basin with fixing accessories,size :425x345x175mm all as specified and as directed Make- JAQUAR CAT No-CNS-WHT-903 or equivalent make as specified in particular specification |
| 60 | S&F in repair Bottle trap (with internal partition) 32mm size with 250mm & 190mm low wall connection pipes & wall flange all as specified and as directed Make-JAQUAR, CAT No -ALD-769L250x190 or equivalent make as specified in particular specification |
| 61 | S&F in repair 15 mm two way Bib cock with flange all as specified and as directed Make-JAQUAR CAT No-FUS-29041 or equivalent approved make as specified in particular specification |
| 62 | S&F in repair Hand shower (health faucet) (ABS Body) with 8mm dia, 1.2 meter long flexible tube & wall hook all as specified and as directed Make-JAQUAR CAT No-ALD-573 or equivalent make as specified in particular specification |
| 63 | S&F in repair toilet paper holder all as specified and as directed Make-JAQUAR CAT No-AKP-35751P or equivalent make as specified in particular specification |
| 64 | S&F in repair corner glass shelf (with bracket) complete all as specified and as directed Make- JAQUAR CAT No CAN-1173 or equivalent as approved by GE from list of approved makes |
| 65 | S&F in repair reflection looking mirror of size 600x450mm fixed to wall with chromium plated brass screws and cup washers all as specified and as directed Make PARRYWERE, Cat No- C 8611 or equivalent make as specified in particular specification complete all as specified and as directed. |
| 66 | S&F in repair Towel Rack 600mm long with Lower Hangers, Stainless Steel all as specified and as directed Make-JAQUAR, CAT No - AKP-35781PS or equivalent make as specified in particular specification complete all as specified and as directed. |
| 67 | M&L for framed shower enclosure, corner entry half rounded enclosure with curved sliding door 6 mm thick glass chrome finish 1200x1200x1950 Make Jaquar Cat No. JSE-CHR-DEL1212X or equivalent make as specified in particular specification complete all as specified and as directed. |
| 68 | M&L for Shower panel brushed stainless steel of size 1400x200mm Make- Jaquar Cat No.JPL-SSF-ST8858B3 or equivalent make as specified in particular specification complete all as specified and as directed. |
| 69 | S&F in repair 20mm Gun-metal, globe or gate valves, cast copper alloy screwd down high pressure with clutch handle screwed both ends for iron pipe including all fittings and fixed complete all as specified and as directed. |
| 70 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe complete all as specified and as directed. |
| 71 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to floor for 110 mm bore of pipe complete all as specified and directed. |
| 72 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 73 | S&F for 15 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed. |
| 74 | S&F for 20 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed. |
| 75 | M&L for glazed ceramic (coloured) tiles of size 300x450x6-7mm / 450X 350X 6-7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing course in cement mortar (1:4) complete all as specified and as directed. |
| 76 | M&L for non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.11sqm but not exceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar (1:4) complete all as specified & as directed. |
| 77 | E/M PORTION |
| 78 | Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed. |
| 79 | Taking down carefully UNSV MCB DBs, SP/TP by unscrewing from main switch boards/cut out boxes and removing matrials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good to disturbed surfaces of wall etc as per existing finishes complete all as specified and directed |
| 80 | M&L for concealed point wiring using approved colour coding (Red, Black and green for single phase circuits) complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade, IS-694 marked with valid CML No. and including drawn through non metallic rigid PVC Concealed conduit medium grade minimum 20 mm dia ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) and conduit accessories fixed on recesses of wall/ceiling/roof and chisselling on wall complete and making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces etc with sunken type pressed steel/welded MS terminal boxes made out of 1.25 mm MS sheet for mounting of fittings like switch, socket and fan regulator with 3mm thick hylum laminated sheet cover including cutting chases pining in for concealed conduit wiring amd making good of disturbed surface complete for the following srl items :- |
| 81 | One light/ Fan point controlled by one no one way switch complete all as specified and as directed. |
| 82 | One 3 pin socket outlet, 5/6 Amps on independent board with cable of 1.5 sqmm size & other switches |
| 83 | One 3 pin socket outlet, 5/6 Amps on same board with other switch complete all as specified and directed. |
| 84 | All as per item No.2.03 above but wiring with 2.5 sqmm PVC FRLSH copper conductor unsheathed and 2.5 sqmm PVC FRLSH copper conductor unsheathed cable as earth continuity conductor for 6 pin6/16 Amp switch socket combination on independent board. |
| 85 | S&F Modular switch one way 5/6 Amp, 1 module, 240 Volts complete all as specified and as directed. |
| 86 | S&F Modular multipurpose socket outlet 2/3 pin plug, 5/6 Amps, 2 module 240 Volts complete all as specified and as directed. |
| 87 | S&F Modular switch one way modular type, 15/16 Amp, 1 module, 240 Volts complete all as specified and as directed. |
| 88 | S&F Modular multipurpose socket outlet 3 pin plug, 15/16 Amps, complete all as specified and as directed. |
| 89 | Supply and fixing ceiling rose surface bakelite two to three terminal 65 x 50 mm 250/230 volts ISI marked complete all as specified and as directed. |
| 90 | Supply and fixing modular electronic fan regulator, stepped type, 2 module, 220 volt complete all as specified and as directed. |
| 91 | S&F bulb holder, angular PVC/ Polycarbonate suitable for batten fitting complete all as specified and as directed. |
| 92 | S&F LED tube light fitting, 1x20 watt, 220-240 volt, AC, invertor type with inbuilt rechargeable lithium battery back up for emergency operation, decorative box type complete with LED tube, electronic driver, holder, diffuser and automatic changeover during power failure with minimum of 04 hours battery backup suitable for wall/ceiling mounting including connecting up with three core flexiblwe copper conductor of suitable size from ceiling rose complete all as specified and as directed. |
| 93 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 94 | M&L for sub main wiring with 6 Sqmm (nominal area) with two runss (Red for phase and black for neutral) of single core FRLSH PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 25x12mm non metalic PVC casing N Caping & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including single core 6 Sqmm earth wire, PVC insulated & unsheathed copper conductor green in colour duly connected to earth wire complete as in repair complete all as specified and as directed.. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length. |
| 95 | M&L for sub main wiring with 4 Sqmm (nominal area) with two runss (Red for phase and black for neutral) of single core FRLSH PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 25x12mm non metalic PVC casing N Caping & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including single core 4 Sqmm earth wire, PVC insulated & unsheathed copper conductor green in colour duly connected to earth wire complete as in repair complete all as specified and as directed.. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length. |
| 96 | S&F in repair of vertical TPN 8 way with provision and MCCB of 63 Amp 4 pole and provided with CRCA sheet steel powder coated double door ready to use DBs provided with insulated vertical phase bus bar, neutral bar, earth bar, sticking saddle, colour coded inter connecting wire set, cable ties, balnket plates etc complete all as specified and as directed. |
| 97 | S&F in repair MCB SPN distribution board in sheet steel enclosure GLAZED DOOR, 8 ways, 240 Volts IP 43 protection, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, fix with concealed wall including making good wall surface by plastering and civil work complete all as specified and as directed. |
| 98 | S&F MCB, SPN, 240 volts, 'C' Curve, 40 Amps, 10 KA, confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and as directed. |
| 99 | S&F MCB, SP, 240 volts, 'C' Curve, 06 to 32 Amps, 10 KA, confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and as directed. |
| 100 | S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp, 240 volt, 10KA, C series complete all as specified and as directed Please Enable Macros to View BoQ information |
| 101 | S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp, 240 volt, 10KA, C series complete all as specified and as directed Please Enable Macros to View BoQ information |
