|
| 1 | Earth work in excavation of ordinary rock by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge. |
| 2 | All as per Item No.01 above,but exceeding 1.50 m in depth and n.exc 3 m depth |
| 3 | All as per Item No.01 above,but exceeding 3 m in depth and n.exc 4.50 m depth |
| 4 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for laying of foundations,drain pipes,manholes,etc and getting out in hard/dense soil complete all as specified and directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 6 | Removing excavated materials in soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point all as specified and directed. |
| 7 | M & L PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and directed. |
| 8 | M & L PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 9 | M&L Precast cement concrete block masonry with solid blocks exceeding 10cm in width by using precast cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) and set in CM (1:6) complete all as specified and directed. |
| 10 | M&L PCC (1:2:4) type B0 (using 12.50mm graded stone aggregate) as in roof kerbs,or mud stops and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered complete all as specified and directed. |
| 11 | M&L Providing PCC (1:2:4) type B0 (using 12.50 mm graded stone aggregate) as in in lintels/bands etc upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 12 | M&L Providing PCC (1:3:6), type C-1 (using 20mm graded stone aggregate) as in coping including necessary use and waste of formwork and finishing exposed concrete surfaces fair and even and weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 13 | Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 14 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs exc. 10 cm but n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar works for rough finished surfaces of concrete complete all as specified and directed. |
| 15 | Use and waste of formwork to sides and soffits o floor or roof beams, beam haunhings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as directed. |
| 16 | M&L Providing RCC M-30 (Design Mix) (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 17 | M&L Providing RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in in lintels/bands etc upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 18 | M&L Providing Pre-cast RCC M-30 (Design mix) (using 20mm graded stone aggregates) as in manholes covers set in cement mortar (1:6) including necessary form work complete all as specified and directed. |
| 19 | Demolition of RCC of any description and in any position not otherwise specifically provided rainforced (rainforcement of cut as required to facilasite demolition etc) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 20 | M&L Providing RCC (1:2:4) (nominal mix) type B1 (using 20 mm graded stone aggregate) as in RCC bands supported on walls, beams and columns in floors,roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed. |
| 21 | M&L Rendering 15 mm thick CM (1:4) on other than fair faces of brick surfaces, finished even and smooth without using extra cement.complete all as specified and as directed |
| 22 | M& L Rendering 15 mm thick CM (1:4) on stone masonry surfaces in :4 finished even and smooth with using extra cement incl sandwitched with chicken mesh Wire netting of galva nised steel wire, 1.40mm dia Size of mesh 20 mm and complete all as specified and as directed. |
| 23 | M&L Filling coarse sand in trenches laid in layers, complete all as specified and directed. |
| 24 | M&L Gravel packing incl jute as filter media 4mm to 6mm size around the PVC pipe complete all as specified and directed. |
| 25 | M&L Filling of gravel in trenches of size 6mm to 10mm, complete all as specified and directed. |
| 26 | M& L Filling of gravel in trenches of size 2mm to 4mm, complete all as specified and directed. |
| 27 | M&L Preparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of black bituminous paint over a coat of red oxide primer complete all as specified and directed. |
| 28 | M&L RCC pipes of size 300 mm dia class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 29 | S & F MS Jali for Filtration of water and allow to move along the bore complete all as specified and directed. |
| 30 | M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed. |
| 31 | All as per Item No.30 above,but 6mm to 8 mm dia |
| 32 | All as per Item No.30 above,but 5mm dia and over upto and including 10mm dia as in stirrups , spacers and binders etc., |
| 33 | Dismantling of asbestos cement sheet /Plain or corrugated steel sheeting, (corrugated or semi corrugated) in roof covering complete all as specified and as directed. |
| 34 | S&F Pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed |
| 35 | S&F Pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed |
| 36 | Dismantling timber Scantling unframed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed. |
| 37 | Dismantling timber Scantling unframed work 40 sqcm and over in section, in any position and removing store complete all as specified and as directed. |
| 38 | S&F Wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed. |
| 39 | S&F Rolled mild steel sections of Fe 410-W (GDE E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed |
| 40 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets or frame work complete all as specified and directed. |
| 41 | S&F False ceiling at allheights with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles of size 595 x 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to .75 as per IS 8225:1987, Noncobustible as per BS 476part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000m, cross-T of size 15 x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanized @ 80 grams per sqm) i.e, 50mm long , 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x 24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per manufacturers instructions,as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 42 | Demolition cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 43 | M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as complete all as specified and as directed |
| 44 | Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 45 | M&L Brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in CM (1:6) complete all as specified and as directed. |
| 46 | M&L Brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in CM ( 1:4) complete all as specified and as directed |
| 47 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 square metre each complete all as specified and as directed. |
| 48 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed. |
| 49 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65X125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 50 | S & F 30 mm 2nd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc completed all as specified and directed by Engr-in-Charge. |
| 51 | S&F UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and including Dismantling/Cutting of existing steel windows with the help of Gas cutter and make good and match with existing walls at any hight complete all as directed by Engr-in-charge all as specified. |
| 52 | S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, meter cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS square tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc., complete all as specified and as directed.Make: SINTEX or equivalent in RAJSHRI/NANDI as approved by GE. |
| 53 | M&L Bed blocks using with PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for back filling of steel chowkats complete all as specified and directed. |
| 54 | M&L Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in CM (1:3) depth of embeded portion exc half brick & n.exc one brick complete all as specified and directed. |
| 55 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 56 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and as directed |
| 57 | S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 58 | S&F 150 mm size aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 59 | S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinges complete all as specified and directed. |
| 60 | S&F 300 mm size Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 61 | Taking down cement plaster of any description and thickness on brick walls including racking out joints, hacking for key, scrubbing down with water etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 62 | M&L Rendering 12 mm thick CM (1:4) on fair faces of brick work or concrete surfaces without using extra cement complete all as specified and as directed |
| 63 | M&L Rendering 15 mm thick in two coats, 10 mm thick in CM (1:6) and 5 mm thick in CM (1:4) mixed with integral water proofing compound as per manufacturers instructions, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately. |
| 64 | Supply only integral water proofing compound. |
| 65 | M & L Preparing newly plasterd wall surfaces of walls and applying two coats of Acrylic distemper over and a coat of primer using chalk whiting etc complete all as specified and as directed. |
| 66 | M & L Preparing newly plasterd wall surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 67 | M & L Complete removal of existing treatment of walls and applying two coats of Acrylic distemper distemper over a coat of primer complete all as specified and directed. |
| 68 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint (ordinary tint) including priming with red oxide, zinc chrome complete all as specified and directed. |
| 69 | M&L Prepation of new or previously untreated wooden surfaces of any description, over 10 cm in width or girth not otherwise described applying two coat of synthetic enamel paint including one coat of pink primer etc complete all as specified and directed |
| 70 | M & L Preparing old decorative surfaces of walls, by washing, rubbing down, stopping and applying two coats of cement base paint of any colour all as apecified and as directed |
| 71 | Dismantling stone slabs and tiles of any description or thickness in floor, aprons laid bedded and pointed in any mortar including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 72 | Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 73 | M&L Vitrified ceramic tiles 10mm thick (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc, laid over and including 15 mm thick screed bed of CM (1:6) complete all as specified and as directed. |
| 74 | M&L Vitrified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed. |
| 75 | M&L Non skid coloured ceramic tiles of size exceeding .0.06 square metre but not exceeding 0.11 square metre of 7 to 8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15 mm thick screed bed of CM (1:6) complete all as specified and as directed. |
| 76 | M&L Glazed ceramic coloured wall tiles of approved colour of size 350x 250x 7/ 450x300x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match laid over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed. |
| 77 | M&L 25 mm thick granite tiles (of any size) machine cut, jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone duly grinding and polishing laid over and including 15mm thick screed bed of 1:4 in steps, jambs, pillars, window cills, cooking platforms and like complete all as specified and as directed |
| 78 | Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified. |
| 79 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed. |
| 80 | S&F CPVC pipes, SDR 11, 16 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets , male and femaleThreaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed. |
| 81 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed. |
| 82 | S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets , male and femaleThreaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed. |
| 83 | S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed. |
| 84 | S&F in repairs stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified and directed. |
| 85 | All as per Item No.84 above, but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed. |
| 86 | S&F PVC connections, 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 87 | S&F in repairs Vitreous China Squatting pan, \\"Orissa\\" pattern, size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete complete including making good to floor complete all as specified and directed. |
| 88 | S & F in repairs PVC 10 ltrs capacity symphonic action type low level flushing cistern including flush pipe, cantilever brackets incluiding taking down existing cistern etc complete fixed in repairs complete all as specified and directed. |
| 89 | S&F Vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed. |
| 90 | S & F in repairs anodized aluminium alloy powder coated curtain rod 19 mm dia of standard thickness with fixing brackets, stops, rollers etc complete all as directed. |
| 91 | S & F in repairs anodized aluminium alloy powder coated curtain rod 19 mm dia of standard thickness with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 92 | S & F in repairs anodized aluminium alloy powder coated curtain rod 19 mm dia of standard thickness with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 93 | Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends etc complete all as specified and as directed. |
| 94 | S&F 75 mm bore PVC (SWR) pipe single socketed (ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specified and as directed. |
| 95 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and as directed. |
| 96 | S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc complete all as specified and as directed. |
| 97 | S&F PVC (SWR) junction single (single T ) equal or unequal 110mm dia with access doors complete all as specified and as directed. |
| 98 | S&F 110mm dia vent cowl PVC (SWR) complete all as specified and as directed. |
| 99 | S & F 110mm bore PVC (SWR) plain bends, any radius complete all as specified and as directed. |
| 100 | S&F in repairs board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed. |
| 101 | S & F in repairs Towel rail 600mm long of brass chromium plated fixed with and including CP brass screws and wooden/plastic cleats. (Minimum weight 190 gms) complete all as specified and directed. |
| 102 | S & F in repairs 600mmx 450mm bevelled edge miirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 103 | S & F Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea foRmation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary CPVC/GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore PTMT/Brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank complete all as specified and directed.Make: Cat Part No: HSWS-0050-02- Pure of M/S Sintex |
| 104 | S&F in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed. |
| 105 | S&F in repairs vitreous China wash basin with full pedestal star white of size 580 x 435 mm with 32mm dia brass chromium plated waste coupling and cast iron brackets complete all as specified and as directed. |
| 106 | S&F in repairs 15mm bore brass Chromium plated wall mixer with provn for overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges for mixing hot and cold water, screwed down complete all as specified and as directed. |
| 107 | S&F in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc including screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. |
| 108 | Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed. |
| 109 | Taking down old unservicieble existing submain wiring of any size and type complete all as specified and as directed. |
| 110 | Disconnecting and removing MCB DBs and AC box from any height stripping out the fitting for examine replacement of un serviceable spare parts,reassembling,refixing in original position including minor repairs for the smooth functioning and testing complete all as specified and as directed. |
| 111 | M&L Providing conceled point wiring complete with stranded copper conductor cables in non-metallic PVC conduit 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLSH conforming to IS - 694 multistranded drawn including conduit with new sunk type pressed steel terminal boxes suitable for MODULAR switches including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLSH conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly for one light/fan point controlled by one, one way switch 5 amps, SP and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed. Note: 1. Modular cover plate with frame and modular metal flux box in the rate quoted. 2. Cutting/chases will be included in rate quoted. |
| 112 | All as per Item No.111 above, but one Bell point controlled by one,one bell push |
| 113 | All as per Item No.111 above, but one 3 Pin 5 Amps switch socket outlet point controlled by one switch on Independt board. |
| 114 | All as per Item No.111 above, but one 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 115 | All as per item No. 111 above but using 4.0 Sqmm single core FRLSH copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 4.0 Sq mm FRLSH copper conductor PVC insulated cable as earth continuity conductor. Note: Cutting/chases will me measured and paid seperately. |
| 116 | S & F Modular switch 1 way, 6 A/10 A, 1 Module capacity 230 volts complete all as specified and directed. |
| 117 | S & F Modular switch 1 way, 16 A, 1 Module capacity 230 volts complete all as specified and directed. |
| 118 | S&F Modular socket outlet multipurpose 5 Pin, 6 amps, 230 volts combined 2 Module complete all as specified and directed. |
| 119 | S&F Modular socket outlet multipurpose 6 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and directed. |
| 120 | S & F Modular ceiling fan regulator for compactbility with BLDC ceiling fans,5 stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and as directed. |
| 121 | S&F Modular Bell Push ,6 Amps, 1 Module complete all as specified and as directed. |
| 122 | S&F Ding dong bell working on 230 volts AC,single phase complete all as specified and as direced. |
| 123 | S & F Ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed. |
| 124 | M & L Concealed sub main wiring with two runs of single core FRLS PVC multistranded stranded unsheathed copper conductor cable of size 6 square mm and drawing through PVC conduit of 20mm dia with accessories on surface in wall/roof along with one run of 6 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed.Note: (i) 3 runs of 6 sqmm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre. (ii) Cutting/chases will me measured and paid seperately. |
| 125 | S&F Wall mounted LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired etc with 2 Nos PVC round blocks for mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W complete all as specified and as directed. |
| 126 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 127 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 128 | S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 129 | S & F Engagement Light LED Indicator Wall Light - Red and Green Colour light luminaries including LED Light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 130 | S &F Sheet metal enclosure MCB DB SPN 12 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed. |
| 131 | S &F Sheet metal enclosure MCB DB SPN 8 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed. |
| 132 | S&F MCB, SP 6-32 Amps, 240 volts of rupturing capacity 10 KA, 'C' series complete all as specified and as directed. |
| 133 | S&F MCB, SPN 32 Amps, 240 volts of rupturing capacity 10 KA, 'C' series complete all as specified and as directed. |
| 134 | S&F Sheet metal enclosure vertical type MCCB DB TPN 4 way double door with suitable rated bus bar 415 volts suitable for and including MCCB TPN as incomer with suitable rated copper bus bar with neutral link including provision for upto 100 Amps MCCB 25KA TPN as incomer and SP/TP MCBs as outgoing and total number of modules equal to MCCB TPN + 12 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, complete all ass specified and as directed. Note: MCB SP/TPN will be measured and paid seperately. |
| 135 | S & F in repairs MCCB,100 Amps,25 KA complete all as specified and as directed. |
| 136 | S & F in repairs MCCB,63 Amps,25 KA complete all as specified and as directed. |
| 137 | M&L Earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed.NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete. |
| 138 | Taking down existing ceiling fans 1200/1400mm sweep and exhaust fan 230/300 mm sweep, remaining/cleaning of dust properly cleaning, greasing& overhualing of bearings including refixing and connecting up all as directed by Engr-in-Charge. Note : Replacement of defective/worn out parts will be measured & paid for separately |
| 139 | S&F in repairs capacitor 2/2.5 mfd as directed (Make - Asian/Usha/Epcos of siemens) complete all as specified and directed. |
| 140 | S&F in repairs ball bearing of exsiting ceiling fans complete all as specified and directed. |
| 141 | S & F in repairs twisted three core copper flexible cable of size 1.5 sqmm from connector to the ceiling rose complete all as specified and directed. |
| 142 | S & F in repairs ‘U’ clamps complete with nut, bolts & split pins Heavy duty, suitable for existing ceiling fan complete all as specified and directed. |
| 143 | S & F in repairs M.S. rod for ceiling fans 5 ft long with ‘U’ clamp at one end other end with out nut bolts washers or screwed thread with check nuts & pin complete. |
| 144 | S & F in repairs Nut of bolts washers for fan blades fixing of ceiling fan of any make/size/type as per site requirement (6 Nos for each set) complete, a suitable for existing ceiling fan on site complete all as specified and directed. |
| 145 | M & L Rewinding of stator complete with super enameled copper wire of gauge/ weight of copper coil, quick varnishing oiling, greasing insulating materials including replacement of worn out parts like u/s cotter pin, nut, screw, check nuts and bolts as required including cleaning of body and testing of the size 1200/1400mm sweep ceiling fans and 230/300mm exhaust fans of any make/model complete all as specifed and directed.Note :- Sapre parts except mentioned above and rewinding to be replaced will be measured and paid seprately under respective items of schedule. |
| 146 | M&L Spray painting of two coats of synthetic enamel paint on ceiling/exhaust fans of any size complete all as specified and directed by Eng-in-charge. |
| 147 | S&F Exhaust fan 250 mm sweep,made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete all as directed. |
| 148 | M & L Cutting chases, pining to making good to facing where ever required and pointing in CM (1:3) to ends or edges of endings, steps, cills etc and cutting chases for concealed wiring making good and cutting not exceeding10 cm grith complete all as specified and as directed. Please Enable Macros to View BoQ information |
