|
| 1 | Material and labour for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 3 | Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 4 | Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 5 | Material and labour for preparation of surfaces of wall and applying two coats of weather coat exterior paint over a coat of primer including sanding/grinding complete all as specified and directed. Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glo/Shalimaar Paints weather PRO+ |
| 6 | Material and labour for broken stone or boulders hardcore of gauge nexc. 63 mm, deposited, spread and levelled in layers nexc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 7 | Material and labour for PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed. |
| 8 | Material and labour for machine cut Kota stone 20 to 25 mm thick in floorings over and including cement screed base 20 mm thick in CM 1:4 laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing to be matched with existing floor upto satisfactIon of Engineer-in-Charge incl demolition complete all as specified and directed. |
| 9 | Material and labour for machine cut Kota stone 20 to 25 mm thick in skirtings, dado and pillar over cement screed base 10 mm thick in CM 1:3 laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing to be matched with existing floor incl demolition complete all as specified and directed. |
| 10 | Taking down chowkhats or frames exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame) and removing from the site complete all as specified and directed. |
| 11 | Supply and fixing for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed. |
| 12 | Supply and fixing for 1.25 mm mild steel, plain, black sheet in covering to door shutters, covering to door chowkhats (frames), steel gates and similar work including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 13 | Supply and fixing in repair for aluminium powder coated frame for fixed partition of section 47.62mm x 44.45 x 1.6 mm thick, shutter glazed with glass of approved make 5mm thick/ACP sheet fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight all as per IS 737-1986 complete all as specified and directed. |
| 14 | Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear mtr including drilling and plugging holes etc. in apron. |
| 15 | Material and labour for R.C.C 1:2:4 nominal mix type B1 (using 20mm graded agg) Slabs supported on walls, beams and columns in floors, roofs, canopies, deck slabs and in shelves and the like including demolition of existing slabs and necessary formworks complete all as specified and directed. |
| 16 | Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 17 | Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat fair finished surfaces of concrete complete all as specified and directed. |
| 18 | Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. |
| 19 | Supply and fixing in repairs for Pre-painted colour galvalume aluminium Zinc coating AZ-150 GI based semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall etc. complete all as specified and directed. |
| 20 | Supply and fixing in repairs for Pre-painted colour galvalume aluminium Zinc coating AZ-150 GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, gutter etc. complete all as specified and directed. |
| 21 | Dismantling existing timber scantling in any position complete all as specified and directed. |
| 22 | Supply and fixing for Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. Note :- 1. steel shall be procured from of make of primary producers.2. Weight of sections like hollow section shall be ascertained by a Board of Officers. |
| 23 | Material and labour for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 24 | Supply and fixing for rotational moulded polyethylene 1000 Ltrs Capacity white water storage tanks (cylindrical vertical with closed top) conforming to IS hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia including dismantling of old tank complete all as specified and directed. |
| 25 | Supply and fixing for medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing including dismantling of old tubing complete all as specified and directed. |
| 26 | Supply and fixing in repair fancy type long body bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete all as specified and directed. |
| 27 | Supply and fixing in repair Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and directed. |
| 28 | Material and labour for rubberised precast prepolished coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with grey cement and pigment complete all as specified and directed. |
| 29 | Material and labour for Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 30 | Material and labour for 40mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of old concrete complete all as specified and directed. |
| 31 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level, complete all as specified and directed. |
| 32 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles. |
| 33 | M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note-water proofing compound shall be measured and paid separately. |
| 34 | Supply only Liquid water proofing compound. |
| 35 | M&L for Preparation of newly plastered or scrapped surfaces of wall or ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack seal and applying two coats (second coat to be applied after 1 hr of application of first coat) of ready to use, single component, penetrative cum film forming barrier system on saturated dry surface of wall as per manufacturer instruction complete all as specified and directed. |
| 36 | M&L for Complete removing of existing treatment from wall / ceilling by using mechanical sander/grinder complete all as specified and directed. |
| 37 | M&L for applying 2mm thick damp proof wall care putty, Preparation of wall/ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. Note : After completion of distempering, contractor have to carry out following work whose rates to be included while quoting the rates. No extra payment will be done on this account and damage if any to be borne by the contractor :-(i) cleaning of floor with floor cleaner and stain should be removed from wall/door/window. (ii) cleaning of fan after removing and refixing the same. (iii) cleaning of curtain rod. (iv) shifting of furniture (as directed by Engr-in-charge). |
| 38 | M&L for Preparation of surfaces of wall / ceiling and applying two coats of weather coat exterior paint over a coat of primer and over a coat of 2mm thick white cement base water proof putty including sanding/grinding complete all as specified and directed (work to be carried upto a height of 7.5m). Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+ |
| 39 | M&L for Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 40 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 41 | M&L for Vitrified ceramic coloured tiles 9 to 10 mm thick (Square or rectangular) of premium quality of group BIa polished, area of each tile n exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured of cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 42 | All as per item no 48 above but as skirting over 10 mm thick rendering in CM 1:4 complete. |
| 43 | M&L for Glazed ceramic coloured tiles of size 450x300x7-8mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour grout to match including rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 for receiving wall tiles and dismantling of existing tile complete all as directed. |
| 44 | M&L for capsule pattern fully vitrified coloured tiles of premium quality of Group BIa 9 to 10mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 45 | S&F, 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable \\"J\\" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed |
| 46 | M&L in repair for 18/19mm thick both side prelaminated colour WPC board for cup board shutter and frame & fixed at site including Auto closing hinges 35 mm of 0 crank (KH-001) openable at 110 degree/Continuous (piano) hinges stainless steel, bright finish or electrogalvanised width of flap 30 mm, magnet catcher and stainless steel handles of 150 mm size complete all as specified and directed. |
| 47 | Dismantling existing timber scantling in any position complete all as specified and directed. |
| 48 | M&L for 18-20 mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like, over 15mm thick screed bed in cement mortar (1:6) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite and rounding the edges and making holes for gas pipe as required , after dismantling of old granite complete all as specified and directed. |
| 49 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded agg) used as sub floor finish the surface to receive to tiles complete all as directed. |
| 50 | M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls. |
| 51 | S&F in repairs galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 52 | S&F in repairs galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 53 | S&F in repair single piece Vitreous china any shade cascade floor mounted single piece water closet P/S trap with dual flush cistern for UF soft close slim seat cover, hinges fitting, conversion bend, fixing accessories set complete all as specified and directed. Make : Jaquar Cat part No OPS-WHT15753NS250UFSMZ/ Cera cat part No S1013105/Kajaria cat part No KB-3007 |
| 54 | S&F Vitreous china full set pedestal type wash basin, white, flat back, size 585x450x220mm including bracket, CP brass waste coupling and waste pipe fixed in repair complete all as directed. Make : Jaquar Cat part No Jaguar FLS-WHT-5801 & 5301/Cera cat part No S2040112 & S2090107 or equivalent |
| 55 | S&F in repair Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed |
| 56 | S&F in repair for bevelled edge looking mirror 5.0mm thick of any size, selected quality glass with design as approved by GE, frame less and fixed to chromium plated brass screws and studs complete all as specified and directed. |
| 57 | S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long. |
| 58 | S&F in repair Corner glass shelf assembly with bracket complete all as specified and as directed. |
| 59 | S&F in repair toilet paper holder with flap guard fixed to walls with chromium plated brass screws. |
| 60 | S&F in repair soap dish holder fixed to walls with chromium plated brass screws. |
| 61 | S&F CP fancy type two way Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series |
| 62 | S&F in repairs 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series |
| 63 | S&F in repairs Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, coupling, washers and waste pipe including bedding in cement morter on to dwarf wall or including fixing cantilver brackets overall size 600mm x 460mm x 203 mm complete all as directed. |
| 64 | S&F 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series |
| 65 | S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series |
| 66 | S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified & directed. |
| 67 | S&F in repair CP Health faucet telephonic type with CP with 1.5m long flexible pipe. |
| 68 | S&F in repair SS towel ring fixed with screw in wall complete all as specified and directed. |
| 69 | S&F in repair SS towel rail, 600mm long. |
| 70 | S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank and removing from site complete all as specified and directed. |
| 71 | S&F in repairs 22-25 mm dia stainless steel curtain rod including brackets and fancy type finials, complete, all as specified and directed. |
| 72 | Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store |
| 73 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed. |
| 74 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 75 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed. |
| 76 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 77 | S&F 75 mm PVC (SWR) floor trap, plain with CP grating, with or without hole including jointing with solvent cement |
| 78 | S&F 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed. |
| 79 | S&F 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed. |
| 80 | S&F 100mm bore PVC (SWR) junction single (Single T) equal or unequal |
| 81 | S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal |
| 82 | S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 83 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed |
| 84 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed |
| 85 | Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each and refixing in same opening after necessary easing, adjusting and repairs complete all as specified and directed. |
| 86 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge |
| 87 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture |
| 88 | S&F 150mm size stainless steel fancy type handle, complete all as specified and directed. |
| 89 | S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified. |
| 90 | S&F 200 mm long stainless steel tower bolts of extruded section (ISI marked) complete all as specified |
| 91 | S&F 100mm double legged door stopper of stainless steel with rubber base all as specified and directed by Engr-in-charge. |
| 92 | S&F 300 mm long stainless steel sliding door bolts, fancy type, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified. |
| 93 | S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings all as directed. |
| 94 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 95 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 96 | S&F stainless steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks/wooden beads or galvanized wire staplescomplete all as specified and directed |
| 97 | S&F 5.5mm thick tinted sheet glass ordinary quality & glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as directed. |
| 98 | S&F ACP sheet 3 mm thick (aluminium composite panel) fixed with frame (aluminium) to receive glass paneling including accessories complete |
| 99 | S&F Door closer (aluminium extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 100 | S&F aluminium Mortice lock (4 levers), vertical type, size 100 mm complete all as specified and as directed. |
| 101 | S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 102 | S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 103 | Taking down Collapsible steel gates, area exc 3.00 sqm but n.exc 6.00 sqm, consisting of channel pickets, pivoted flat bars, top and bottom runners, handles etc., and making necessary repairs like oiling, greesing, tightening loose nuts, bolts, rivets etc, replaceing missing small articles to make it functional, erected and fixed in old position and securing runners with holdfasts and brackets, complete all as specified |
| 104 | M&L for repair by dismantlig of existing wooden floor and provide new HDF laminate wooden flooring of 15 mm thick over 2 mm thick Foam sheet over a layer of polythene film sheet over and including wooden fillets of size exc 16 sqcm but n n 25 sqcm and all necessary fixtures to match with existing floor level and finished top finished floor. completed all specified and directed. |
| 105 | S&F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 106 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. |
| 107 | Taking down old U/S main switches, Sheet metal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed. |
| 108 | Taking down old unsv T/L of any size and capacity all as directed. |
| 109 | Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of bldg work. |
| 110 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. Please Enable Macros to View BoQ information |
| 111 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. Please Enable Macros to View BoQ information |
