|
| 1 | M & L for Preparation of old distempered surface including by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying one coat of oil bound distemper on wall any colour or tinted (where as requird 1mm thick white putty) upto 20 Mtr height including necessary scaffolding etc complete all as specified and as directed.Note:- Application of distemper shall be with the help of a roller only. |
| 2 | M&L for preparation of old plastered/unplastered/concrete surfaces of walls, kerbs stone & stopping of surfaces and applying one coat of cement base paint upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.Note : Application as per SSR Pt-I clause 15.15.1 to 15.15.12 CURING : Painted surfaces shall be sprinkled with water using a fog spray two or three times a day. The curing shall be started as soon as the paint has hardened so as not to be damaged by the spray, about 12 hour after the application. |
| 3 | M&L for 15mm thick rendering in cement mortar 1:6 on walls of other than fair face even and smooth without using extra cement compete including taking down old cement plaster and all debries removing the outside of MOD land all as specified and directed. |
| 4 | M&L for preparation of new plastered/concrete surfaces of walls and applying two coats of oil bound distemper over one coat of primer, over 2mm thick white putty white or tinted upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.Note:- Application of distemper shall be with the help of a roller only. |
| 5 | M&L for 15mm thick rendering in cement mortar 1:4 on walls of surfaces finished even and smooth without using extra cement upto 12 Mtr height complete all as specified including taking down old cement plaster and all debries removing the outside of MOD land directed.Note :- WPC shall be measured and paid separately |
| 6 | M&L for Rendering 10 mm thick in cement mortar (1:4) on ceiling, parapet, chajjas, facias of building and finished the surface even and smooth without using extra cement, inc taking down existing plaster complete all as specified and directed by Engineer-In-Charge. . |
| 7 | M&L for preparation of new plastered /concrete surfaces of ceiling and applying two coat of oil bound distemper, white or tinted with 1 mm thick birla white putty) ) upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.Note:- Application of distemper shall be with the help of a roller only. |
| 8 | M&L for 15mm thick rendering in cement mortar 1:3 mixed with WPC as in chajjas upto 12 Mtr height including necessary scaffolding etc complete including taking down old cement plaster and all debries removing the outside of MOD land all as specified and as directed. Note :- WPC shall be measured and paid separately |
| 9 | M&L for preparation of new plastered/concrete surface of wall/chajjas/facia and applying two coats of exterior emulsion paint over one coat of primer upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed. |
| 10 | M&L for preparation for newly plastered wall, chajjas/facia etc surfaces and applying two coats of cement paint over over one coat of primer upto 12 Mtr height as per manufacturer's instruction etc compete all as specified and directed. |
| 11 | M&L for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 12 | M&L for preparation of old steel or iron surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint upto 12 Mtr height , including necessary scaffolding complete all as specified and directed. |
| 13 | M&L for preparation of surfaces and applying one coat of exterior acrylic emulsion weather proof treatment upto 15 Mtr height including necessary scaffolding etc complete all as specified and directed.Note : The tint and shade be as approved by the GE. |
| 14 | M&L for preparation of old plastered /concrete surfaces of ceiling and applying one coat of oil bound distemper, white or tinted (where as requird 1mm thick white putty) ) upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.Note:- Application of distemper shall be with the help of a roller only. |
| 15 | M & L for complete removal of exiting suface treatment and provide two coat of oil bound distamper over a coat of primer after rubbing with sand paper upto 15 Mtr height including necessary scaffolding etc complete all as specified and directed. Note:- Application of distemper shall be with the help of a roller only. |
| 16 | M & L for 2mm thick wall care putty on internal old plastered/ unplastered wall surfaces/ concrete surfaces including necessary scaffolding etc complete all as specified and directed. |
| 17 | M&L for preparation of old plastered/ unplastered/ concrete surfaces, kerb stone over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint and at any height including necessary scaffolding etc complete all as specified and directed. |
| 18 | M & L for complete removal of exiting suface treatment and provide two coat of exterior acrylic emulsion weather proof treatment over a coat of primer after rubbing with sand paper upto 15 Mtr height including necessary scaffolding etc complete all as specified and as directed.Note:- Application of distemper shall be with the help of a roller only. |
| 19 | M & L for 3mm thick water proof wall care putty on external old plastered/ unplastered wall surfaces/ concrete surfaces including necessary scaffolding etc complete all as specified and as directed. |
| 20 | M&L for preparation of old plastered /concrete/painted surfaces after Washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying two coats of oil bound distemper, white or tinted upto 12 Mtr height including 1mm thick birla white putty over a coat of primer necessary scaffolding etc complete all as specified and directed.Note:- Application of distemper shall be with the help of a roller only. |
| 21 | M&L for two coat french polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on old workscomplete all as specified and directed. |
| 22 | Providing and applying plaster of paris putty of 3 mm thickness over plastered surface to prepare the surface even and smooth.complete all as specified and directed. |
| 23 | M&L for preparation of old painted surface/previously untreated surface/old plastered/ unplastered/ concrete surfaces of any description apply two coat of plastic emulsion over a coat of primer of over 10cm girth or width, not otherwise described complete all as specified and directed. |
| 24 | M & L for complete removal of exiting suface treatment and providing and applying approved make exterior/interior texture paint finish on wall surfaces, including surface preparation such as cleaning, scraping, sanding, filling cracks with putty, applying primer coat, and then applying texture coating one or more of required pattern/design using suitable tools, complete in all respects as per manufacturer specifications and direction of Engineer-in-charge. |
| 25 | Supply only liquid water proofing compound complete all as specified and directed. |
| 26 | S&F in repairs for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and directed. |
| 27 | S&F in repairs for bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed. |
| 28 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed. |
| 29 | M&L for Glazed ceramic coloured tiles 450mm x 300mm x 7mm thick, in vertical surface such in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles Including backing coat 10 mm thick in cement mortar 1:4 on brick walls for laying tiles complete all as specified and directed by Engr-in-charge. |
| 30 | M&l for non skid ceremic tiles 7 to 8mm thick square/ rectangular area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15 mm thick screed bedfor floor finishes in CM 1:4 complete all as specified and directed. |
| 31 | M & L for vitrified tiles light shade 8 to10mm thick (square/rectangular) polished area of each tile 600mm x 600mm / 605mm x 605mm over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 32 | S&F in repair, 600mm x 450mm plain edge mirror of selected quality glass not less than 5.5mm thick, mounted on wall fixed with stainless steel stud 25 mm dia complete all as specified and directed. Make: cera /jagaur/perry ware/hind ware |
| 33 | S&F in repair stainless steel plate rack overall size 90 x 75 X 25 cm made out of 0.63mm thick steel sheet as per standard pattern fixing to walls with screwed complete all as specified and directed. |
| 34 | S&F, in repair, chromium plated glass corner (Corse) size 300mmx300mm complete all as specified and directed. |
| 35 | S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size complete all as specified. |
| 36 | S&F in repair plastic seat cover white/coloured (as required at site) for water closet padestal pattern with flat bottom and steel chromium plated hinging device complete all as specified and directed. |
| 37 | S&F in repair plastic seat cover white/coloured (as required at site) for water closet one piece type with flat/round bottom and steel chromium plated hinging device complete all as specified and directed. |
| 38 | M&L for Opening of air lock/blockage in GI/composite (PL-AL-PE) pipe line from outlet of water tank to all internal GI pipes/PPR/fittings to smooth flow of water from bib taps/showers/WHB pillar tap/stop valves complete by air pressure /water gravity pressure complete all as specified and directed. |
| 39 | S&F in repair continuous (Piano) Hinges mild steel,bright finish or electro galvanised width of flap (when open) 30 mm complete all as specified and directed. |
| 40 | S&F in repair satinless steel magnetic catcher for complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F in repair satinless steel 75mm long auto door lever for kitchen cabinet etc. complete all as specified and directed by Engr-in-Charge. |
| 42 | Refixing of shutter/leaf including taking down easening and adjusting,welding and also refixing hardware as required including renewal of unservicebale screws etc of any description area not exc 1.0 sqm each in same opening complete all as specified and directed. |
| 43 | Refixing of shutter including taking down easening and adjusting,welding and also refixing hardware as required including renewal of unservicebale screws etc of any description exc 1.0 sqm but not exc 2.0 sqm each in same opening complete all as specified and directed. |
| 44 | Taking down old aluminium door/Ventilator/window and refixing in same opening after repairing to damaged/loosened rail sections,tightening of screws, repairing/ replacement of rubber beading to aluminium shutter, repairing/oiling to locking arrangement and oiling / greasing, repairing to handle, tower bolt as required and making the shutter run/swing smooth complete all as specified and directed. |
| 45 | Supply & Fixing 'in repair' 18 to 20 mm thick, WPC board both side prelaminated of approved texture (Rajshree make or equivalent as approved by GE) as shutter for kitchen cabinet and cup board shutter etc (with shelves and partitions) including necessary fitting & fixture as per manuacturer's i,e stainless steel auto door lever, magnetic catcher, SS handle 100mm long complete all as specified (Make / shade / design / size as approved by Enginner -in-Charge) |
| 46 | Supply and Fixing for PVC Wall Lining any colour , texture consisting of 5mm thick single side prelam PVC sheet used instead of plain including PVC sheet fillet (U,C or L shape) by mean of solvent/nails/screws to make grid as per manufacturer instruction fixing on wall and including of taking down old PVC wall Panneling complete all as specified and directed. Note:- Make Approved by GE |
| 47 | S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 48 | Supply and fix plain sheet glass 4mm thick, ordinary quality, not exceeding 0.50Sqm in each pane, and glazing with oil putty and securing pins, spring clips etc including hacking out old glass complete all as specified and directed. |
| 49 | S&F stainless steel decorative type brackets suitable for 20mm dia curtain rod or similar articles and complete all as specified and directed. |
| 50 | S&F 20mm dia stainless steel decorative type curtain rod or similar articles and complete all as specified and directed by Engr- in-Charge. |
| 51 | S&f in repairs for Vitreous China wash basin with pedestal, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand and waste pipe etc fixed complete all as specified and directed. |
| 52 | S&F in repairs Health faucet stainless steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 53 | S&F in repairs CP Central hole Basin Mixer with copper pipe complete all as specified and directed. |
| 54 | S&F in repairs Wall Mixer telephonic type chromimum plated with CP wall flange complete all as specified and directed. |
| 55 | S&F in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 56 | Providing and fixing 5 mm thick Aluminium Composite Panels (ACP) of approved make and shade for external/internal wall cladding, fixed over aluminium framework.The work shall include fabrication and installation of supporting framework made of aluminium sections (or GI frame as specified), cutting, bending, routing, grooving of ACP sheets, fixing with stainless steel screws, rivets, and approved sealants, including sealing of joints with silicone sealant, complete in all respects as per manufacturer’s specifications and direction by Engineer-in-charge. |
| 57 | M&L for removal of paint/putty etc from the wall using mechanical means as per manufacturer instructions. Hacking of existing plastered surfaces upto 3mm. Note:- The wall treatment shll be done on hacked/new cementous surface for proper bonding & requsite results Surface to be treated shall be passed by Engr-in-Charge. (a) Take Poly plastic fibre adhesive/ Eazeecoat Ultra, white cement in equal proportion & add 25% water in it to make the mix as per manufacturer instructions. Apply 2 coats of wall bind adhesive mixture to the wall using a roller & brush.(b) Final & top coat apply with mixing ratio of poly plastic fibre/ Eazeecoat Ultra top coat & water & white cement as per manufacturer instructions and incl. finish the surface with help of water proof wall care putty/OBD/Plastic emulsion/exterior emulsion/CBP etc.to match the existing surface.Note:- The poly fibre plastic/ Eazeecoat Ultra should have following characterstics:-(a) Resists positive hydrostatic presure of upto 14 bars.(b) Crack filling ability upto 45 mm.(c) Temp control upto 14 degree celcious on any surface like concrete roof, metal shed & for walls also.(d) High durablity to water,fire & UV rays covering climate condition to + 55 degree celcious. Make : Nerolac Perma/ European Paints & Chemicals/ Ever Paint. |
| 58 | Providing and fixing approved quality decorative wallpaper 400 micron (Premium / 3D / textured) of required design, shade, and texture on prepared wall surface, including surface preparation such as cleaning, rubbing with sandpaper, filling undulations with putty, applying primer if required, and pasting wallpaper using recommended adhesive. The work includes proper alignment of patterns, cutting, finishing at edges, corners, and junctions, complete in all respects as per manufacturer specifications by Engineer-in-charge instructions. |
| 59 | Treating soil along the external wall below concrete or masonry apron using chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed. |
| 60 | Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 61 | Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 62 | Taking down shutter of any description not exceeding 1 Sqm each complete all as specified and as directed. |
| 63 | Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed. |
| 64 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Complete all as specified as per Manufacturer broucher.MAKE: RAJSHREE,SINTAX,ECOCELL OR EQUIVALENT. |
| 65 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. MAKE: RAJSHREE,SINTAX,ECOCELL OR EQUIVALENT. |
| 66 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions frames (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws. all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 67 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows(two or three track sliding/openable) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 68 | Material and labour for aluminium composite panel sheet of 3mm thick which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 u PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber gasket complete all as specified and directed.Make :- Alstone/Alex panel/Armstrong/Euroboard |
| 69 | Supply and fixing 4.80mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels not exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 70 | S&F 100 mm Aluminium handles Extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed. |
| 71 | Supply and fix 180mm size powder coated (any tint) aluminium \\"American Handle\\" fixed to aluminium door with suitable screws, complete all as specified and directed. |
| 72 | S&F 100 mm size but hinges medium weight stainless steel.complete all as specified & directed. |
| 73 | S&F 150 mm size Aluminium , barrel tower bolt of extruded section complete all as specified & directed. |
| 74 | Supply and Fix, Aluminium anodised, barrel tower bolts 200mm long, powder coated, of extruded section and fixed, complete all as specified and directed. |
| 75 | Supply and fix, Aluminium alloy, anodised, Sliding door bolts 200mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed. |
| 76 | S&F for 30mm thick flush shutters, solid core construction, with block core plywood face panels, commercial type on both sides, chemically treated against termite infestation complete all as specified and directed. |
| 77 | S&F 35mm thick IInd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge/glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for door and ventilator complete all as specified and directed. |
| 78 | M&L for two coats of synthetic enamel paint over a coat of pink primer including prepration to new wooden surfaces exc.10cm in width or girth complete all as specified and directed. |
| 79 | Supply and fixing brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed. |
| 80 | S&F of Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed Stainless Steel wire staples complete all as specified & directed. |
| 81 | M&L Polished granite stone slab18- 20mm thick coloured as in cooking platform/door sills, partitions, jambs, pillars, window-cills, set in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) and jointed with grey cement slurry and pointed in neat white cement slurry mixed with pigment to match the shade of floors, including moulding at front edge or both edges including dismantling complete all as specified and as directed by Engr-in-Charge complete. |
| 82 | Supply and fixing Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 83 | Supply and fix in repair Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 84 | Supply and fix in repair brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed. |
| 85 | Supply and Fix in repair, powder coated door seal fixed with screws to any type of shutter, complete all as specified and directed. |
| 86 | S&F in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.Make::Jaquar/hindware/Cera |
| 87 | S&F in repair of Vitreous china one piece EWC standard size wall Hanging / Floor Mounted white/ivory colour with dual flushing cistern white including 'P' or 'S' trap , fixed as complete all as specified and directed. Make: Parryware/ Cera/Jaquar etc. Note:- Brush/paint marks on floor,door,windows,glass panes, other walls,electric appliances and cupboard after OBD/Snowcem/ext painting/ if left unaddress 25% of payment shall be restricted. |
| 88 | Note :- Amount of credit of Rs.13330.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
