|
| 1 | Part-A (Civil Work)Dismentalling brick or stone masonary in lime or cement mortar under 3 mtr height including stacking the useful materials for re-use and removing the debries from site with all leads as directed by the Engineer-in-charge including all labour and T&P required for the work etc. including labour cess but excluding GST complete |
| 2 | Removing old lime or cement plaster from walls including raking out joint 12mm deep and removing the debris from site with all leads as directed by the Engineer-in-charge including all labour and T&P. required for the work etc. including labour cess but excluding GST complete |
| 3 | Dismentalling and removing doors, windows and ventilators including removal of frames, hinges etc. and stacking the materials for reuse and removing the debries from work site with all leads and lifts as directed by the Engineer-in-charge including all labour and T&P including labour cess but excluding GST required for the work etc. including labour cess but excluding GST complete |
| 4 | Earth work excavation in foundation trenches in all kinds of soil incluidng moorum stoney earth and earthmixed with boulders except sheet rock and boulders requiring blasting, including dressing and levelling the bed up to the required depth and depositing the excavated materials with all leads and lifts, T&P. shoring and shuttering if required etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge |
| 5 | Supplying and filling foundation and plinth with sand well watered and rammed with basic cost, conveyance, royalities of all materials including labour cess but excluding GST complete |
| 6 | Cement concrete (1:3:6) in foundation and floor i;e below the base course of terrazo flooring using 4cm (1½”) size black crusher hard broken granite aggregates / chips / metal of approved quality and from approved quarry, including lowering, laying concrete, watering curing etc. complete to required level laid in layers not exceeding 1'-6\\" thick including basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge |
| 7 | Providing P.C.C. M-20 in open foundation using 40mm & down graded size black hard crusher broken granite aggregates of approved quality and from approved quarry including lowering, laying, concrete, compacting with mechanical vibrator, watering, curing, centering & shuttering etc. complete to required level laid in layers including basic cost, conveyance, royalities of all materials and cost of all labour required for the work etc. including labour cess but excluding GST complete in all respect as per direction of the Engineer-in-charge |
| 8 | Supplying fitting, fixing of M.S. Angle for rafters made with difference of pipe and M.S. plate as per approved design including basic cost of all materials, welding, conveyance and labour including cost of errection etc. including labour cess but excluding GST complete as per direction of the Engineer-in-chargeSquare pipe - 75x75x5mmPurlin - 50x50x5mm |
| 9 | Supplying, fitting and fixing 0.45 mm thick GI trafford (Dura shine) sheet in roof including drilling holes in windties fixing of ridges valley windties etc. complete including basic cost of fittings, all labour & T&P. required for the work etc. including labour cess but excluding GST complete (cost of windties will paid separately) as per direction of the Engineer-in-charge |
| 10 | 12mm (½\\") thick cement plaster (1:6) over brick masonry finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalties of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per specification & direction of the Engineer-in-charge |
| 11 | 16mm (5/8\\") thick cement plaster (1:6) over brick masonary finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge |
| 12 | Supplying, fitting and fixing of Vitrified plain tile in floor of size 600x600mm of approved make conforming to IS 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including basic cost of all materials, labour, T&P etc. required for the work all complete as per direction of Engineer-in-charge |
| 13 | Supplying, fitting and fixing of vitrified plain tile of size 600x600mm in dado & skirting on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge |
| 14 | Finishing wall surfaces of wall with water bound cement primer one coat over inside & outside surface of wall including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge |
| 15 | Distempering two coats with any approved shade over interior surface of walls and ceiling including labour, T&P. and cost of distemper required for the work etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge |
| 16 | Finishing wall surfaces of wall with weather coat two coats to outer surface of walls including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge |
| 17 | Painting two coats with enamel paints of approved shade over a coat of primer in all floors to wood and iron works including sand papering, polishing the surface, basic cost, conveyance, of all materials, all labour and T&P. required for the work including labour cess but excluding GST including the cost of paint and primer as per the direction of the Engineer-in-charge |
| 18 | Providing & laying water proofs with polymeric bituminous membrance (plastic felt) of 2.25 kg/sqm and 1.5 OR 2 mm thickness consisting of layers having center core of 20 microns thermoplastichigh monecular high density polyetholene H.M.HOPE film of grade 2504 including primingthe surface with bituminious primer @0.3 kg/sqm providing a coat of hot blown bitumen of 1.32 kg/sqm applying & laying plastic felt membrance with 10cm overlap adhered to blown bitumen of 85/25 or 90/15 grade & covered with a layer of hot blown bitumen @1.20kg/sqm etc. including labour cess but excluding GST complete |
| 19 | 25mm thick grading Concrete (1:2:2) over roof slab using 12mm & down graded size black hard crusher broken granite chips of approved quality and from approved quarry, including finished smooth with proper slope after chipping, chiselling and cleaning the roof slab including hoisting, watering, curing, basic cost, conveyance, royalities of all materials and cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge |
| 20 | Providing and fixing 12mm thick Gypsum board ceiling with G.I. perimeter channels of size 0.55 thick having one flange of 20mm and another flange of 30mm and a web of 27mm alongwith perimeter of ceiling, screw fixed to brick wall /partition with the help of nylon sleeves and Screws, at 610mm centres. The suspending G.I. intermediate channels of size 45mm, 0.9mm thick with two flanges of 15mm each from the soffite at 1220mm centres with ceiling angle of width 25mm x 10mm x 0.55 thick fixed to soffite with G.I. cleat and steel expansion fastners at every 610mm c/c Celling sections of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm centres. 12.5mm tapered edge Gypboard is then screw fixed to ceiling section with 25mm drywall screws driver or drilling machine with suitable attachment. Filling and finishing the tapered and square edge of the boards with jointing compound & joint paper tape including labour cess but excluding GST complete as per direction of Engineer-in-Charge. |
| 21 | Part-B (E.I Works)Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FRLS-H PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL/KEI) Group-A -L.P- 17 |
| 22 | Group-B L.P- 17 FP-9 |
| 23 | Group-C L.P-23 FP-9 ExFP-06 CBP-03 |
| 24 | Supply and fixing of 5 Amp plug with switch on existing board (Piano type/cover including connection etc. as required ) |
| 25 | Supply and fixing of metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 6pin 5/6 & 15/16Amp socket outlet and 15/16Amp piano type switches connection painting etc. as required. (make-Anchor/ Cona/HPL/Equivalent)as per direction of Engineer in Charge |
| 26 | s/f of ac point consisting of 32A industrial socket with 32A starter with all connection compelete s per the direction of engineer in charge |
| 27 | S/F of Multipurpose board consisting 2nos 5amp Switch and 2nos 5amp Socket as per direction of Engineer in Charge.(Make-Anchor/Cona/Equivalent) |
| 28 | Recessed wiring to submain in the following sq.mm FRLS-H PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL/KEI) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia as per direction of Engineer in Charge |
| 29 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do- |
| 30 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 31 | 2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia |
| 32 | 1x1.5 mm2 for inverter wiring |
| 33 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 12 way double door |
| 34 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 8 way double door |
| 35 | Supply and fixing of 5Amp to 32A rating 240 V/415 V \\"c\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-Legrand /L&T/Schneider/Siemens/Hager) Single pole (SP) |
| 36 | 63A dp MCB |
| 37 | Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required. |
| 38 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .as per direction of Engineer in Charge |
| 39 | Supply and fixing of Electronic Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj)as per direction of Engineer in Charge |
| 40 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required |
| 41 | Earthing.Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 42 | S/F of 63A ICDP Main Switch of Havells/Anchor/HPL/L&T make. Including all coneections and accessories as required. |
| 43 | Part-C (P.H Work)Internal PH workProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C - PVC pipe |
| 44 | 25mm dia dia PVC pipe |
| 45 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 46 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 47 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 48 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 49 | 15mm dia CP Body Bib cock (Con-CHR-107KN Jaquar make) |
| 50 | 20mm dia CP concealed stop cock (Jaquar Make)CON-CHR-83KN |
| 51 | 25mm dia brass full way valve (Shakti make) |
| 52 | 15mm CP Extension piece |
| 53 | 125mm CP grating |
| 54 | 15mm size C.P. flange |
| 55 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 56 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 57 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 58 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 59 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 60 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 61 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 62 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 63 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 64 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 65 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 66 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.23'' Orissa pan(Hindware/Parryware/Neycer make) |
| 67 | EWCSingle Piece (Hindware/Parryware/Neycer make) |
| 68 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 69 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 70 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. Porcelin Sink (600 x 450 x 200) |
| 71 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 72 | Towel ring |
| 73 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf CP/NP guard rail |
| 74 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm Size Mirror. |
| 75 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 76 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.½” x 5” CP Shower |
| 77 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge1x2.10x1.80x0.10= |
| 78 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( vetrified matt finished floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria tile 60cmx60cm |
| 79 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 80 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( vetrified wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria glazed tile 60cmx60cm |
| 81 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. 4x0.84mx2.13m= |
| 82 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge 4x(0.80m+2.13m+2.13m) Please Enable Macros to View BoQ information |
