|
| 1 | APPENDIX -A .GROUND FLOOR & FIRST FLOOR |
| 2 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 3 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 4 | OD220675/2024-2025: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 5 | OD267084/2024-2025:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size). The rate including head load conveyance and boat conveyance charge, etc. complete. |
| 6 | OD89858/2025-2026:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers.(Head load and conveyance applied) |
| 7 | OD220680/2024-2025:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 8 | OD220679/2024-2025:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 9 | OD220662/2024-2025:Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) |
| 10 | OD89860/2025-2026:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform(boat & head load conveyance charge implied) |
| 11 | OD266322/2024-2025:Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and walls Under 20 cm wide including boat conveyance and head load conveyance charge, etc. |
| 12 | OD220667/2024-2025:Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum.-All work upto plinth level. |
| 13 | OD220674/2024-2025:.Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. All work above plinth level upto floor V level |
| 14 | OD220664/2024-2025:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 15 | OD220657/2024-2025:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 16 | 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 17 | OD266335/2024-2025:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. Rate including head load conveyance and boat conveyance charge. |
| 18 | OD115735/2025-2026:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete. The rate including head load conveyance and boat conveyance charge, etc. complete. |
| 19 | OD266043/2024-2025:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand). Rate including head load conveyance and boat conveyance charge, etc complete |
| 20 | OD266053/2024-2025:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding, boat conveyance and head load conveyance charge, etc. complete |
| 21 | OD220661/2024-2025:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood |
| 22 | OD266940/2024-2025:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood. The rate including head load conveyance and boat conveyance charge, etc. complete. |
| 23 | OD220658/2024-2025:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood |
| 24 | OD266950/2024-2025:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters. The rate including head load conveyance and boat conveyance charge, etc. complete. |
| 25 | OD266992/2024-2025:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding. The rate including head load conveyance and boat conveyance charge, etc. complete. |
| 26 | OD220668/2024-2025:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 27 | OD267046/2024-2025:Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 28 | OD267051/2024-2025:Providing and fixing finished brass hard drawn hooks and eyes:250 mm. |
| 29 | OD112218/2025-2026:Providing and fixing finished brass hard drawn hooks and eyes:100 mm. |
| 30 | OD112246/2025-2026:Supplying and fixing 200 mm Aluminium aldrop. |
| 31 | OD112249/2025-2026:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm. |
| 32 | OD267056/2024-2025:Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:200x10 mm |
| 33 | OD265994/2024-2025:12mm cement plaster of mix : 1:4 (1 cement : 4 fine sand) with water proofing compound @ 1Litre / 1 bag of cement. Rate including head load conveyance and boat conveyance charge, etc. complete. |
| 34 | OD267149/2024-2025:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand). The rate including head load conveyance and boat conveyance charge, etc. complete. |
| 35 | OD220678/2024-2025:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 36 | OD267154/2024-2025:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. The rate including head load conveyance and boat conveyance charge, etc. complete. |
| 37 | OD220671/2024-2025:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer |
| 38 | OD84043/2025-2026:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). The rate including head load conveyance and boat conveyance charge, etc. complete. |
| 39 | OD84045/2025-2026:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work (Rate including head load and boat conveyance) |
| 40 | OD88925/2025-2026:Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). The rate including head load conveyance and boat conveyance charge, etc. complete. |
| 41 | OD220660/2024-2025: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 42 | OD202482/2025-2026:Providing and laying vitrified mat finished floor tiles in different sizes (thickness 9-10mm) with water absorption less than 0.05% and skid resistance of approved make in all colours and shades.laid on 20mm thick cement mortar 1:4( 1 cement :4 coarse sand).including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. The rate including head load and boat conveyance charge, etc. complete. |
| 43 | OD202483/2025-2026:Providing and laying vitrified mat finished floor tiles in different sizes (thickness 9-10mm) with water absorption less than 0.5% and skid resistance of approved make in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm. The rate including head load and boat conveyance charge, etc. complete. |
| 44 | OD207122/2025-2026:Roofing with powder coated Alu-Zinc trafford sheet 0.35mm thick overlaped 150mm at ends and GI hooks or crank bolt and nuts including plain washers and bitumen washers etc. complete. The rate including head load and boat conveyance charge, etc. (Approved OD vide Est.No.20580/2022) |
| 45 | OD207472/2025-2026:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. The rate including head load conveyance and boat conveyance charge, etc. (Approved OD vide Est.No.20580/2022) |
| 46 | 13.71:Lettering with black Japan pint of approved brand and manufacture |
| 47 | OD220654/2024-2025:supplying and Providing inauguration stone of teleblacksize (0.70x0.90m) with black 20mm thick granite stone engraving letter as specified and running boarder four sides in stone including golden colour furnishing with all cost of materials and labour charges, conveyance etc complete. Please Enable Macros to View BoQ information |
