|
| 1 | Stone Aggregate(single size): 40 mm nominal size |
| 2 | Stone Aggregate(single size):20 mm nominal size |
| 3 | Coarse sand (zone III) |
| 4 | Portland Cement |
| 5 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 6 | Vibrator (Needle type 40 mm) |
| 7 | Stone Aggregate(single size): 10 mm nominal size |
| 8 | Solid blocks of size 30x20x15cm |
| 9 | Royalty for good earth |
| 10 | Fine sand (zone IV) |
| 11 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 12 | Vitrified floor tile 60x60 cm |
| 13 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 14 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 15 | Rolling shutter made of 80x1.25 mm machine rolled laths |
| 16 | Top cover for rolling shutters 1.25 mm thick |
| 17 | 27.5 cm long wire spring grade no 2 for rolling shutters |
| 18 | wall form panel 1250x500 mm |
| 19 | Corner angle 45x45x5 mm 1.50 m lon |
| 20 | 100 mm channel shoulder 2.5 m long |
| 21 | Double clip (bridge clip) |
| 22 | Single clip |
| 23 | M.S. Tube 40 mm dia |
| 24 | Structural steel such as tees, angles, channels and R.S. joists |
| 25 | Red oxide Zinc chromate primer |
| 26 | Adjustable span ESO+SI (2.35-3.40) |
| 27 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 28 | Beam clamp 300-380 mm (450-1070 mm) |
| 29 | Wall form panel 1250x450xmm |
| 30 | Corner angle 45x45x5 mm 2.50 long |
| 31 | Column clamp 450x1070 mm |
| 32 | Prop 2 m (2-3.5m) |
| 33 | Twisted steel/deformed bars |
| 34 | Anjili wood scantls |
| 35 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 36 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 37 | Bright finished or black enameled mild steel screws 40 mm |
| 38 | Bright finished or black enameled mild steel screws 20 mm |
| 39 | Anjili wood planks |
| 40 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 41 | 200 mm Aluminium aldrop |
| 42 | Anodised Aluminium tower bolt (barrel type) 200x10 mm |
| 43 | Chromium plated Brass screws 30 mm |
| 44 | Mild Steel round bar above 12 mm dia |
| 45 | Flats up to 10 mm in thickness |
| 46 | Rawl plug 50 mm (designation 10 nos) |
| 47 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
| 48 | Vitreous china pedestal type wate closet |
| 49 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe |
| 50 | Vitreous China flat back wash basin 630x450 mm |
| 51 | 15 mm C.P.brass tap |
| 52 | C.P. brass waste 32 mm |
| 53 | C.I. bracket for wash basin and sinks |
| 54 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 55 | PVC pipe 50 mm outer dia.6kgf/cm2 Please Enable Macros to View BoQ information |
