|
| 1 | FIRE FIGHTING Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Pump complete with Pump Set, Electric Motor, Base Frame and with 1 no. pressure switch, 1 no. pressure gauges, 2 nos. Butterfly valves, 1 no. NRV . PCC foundation and foundation bolts as per required for downcomer and system complete with Copper interconector from pump panel to pump drawn through PVC Rigid/Flexible Conduit(Maximum distance 5 meter) as required. Flow rate: 900 Ltrs/Min , 2840 RPM, Head: 35 Meter |
| 2 | Construction of storage tank /water reservoir of 10000 ltrs /Fiber Water tank four layer unbrakable extra thick and flexible material for long life new UV threaded lid to keep dust particles out with all needed accessories.on top of roof including all accessories & materials as per direction of engineer in chief |
| 3 | Supply, Installation of structural steel like ( Beam , Channel, Angle, Plate & Sheet) for 2 nos terrace tank base & barricade for Monkey protection . |
| 4 | MCC PANEL Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required. INCOMING: One (1)- 63 Amp, 10 KA,4P (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter ,Ameter with selector switch. OUTGOING: Two (2) - 32Amp,10KA, TP(Class-C) MCB with Star-Delta starter with O/L and Single Phasing Preventor suitable for 7.5 HP motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.One (1) - Set of Auxilliary relay for automatic operation through pressure switch. |
| 5 | Providing, laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to lS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc.,fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia |
| 6 | Providing, laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to lS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc.,fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.65mm dia |
| 7 | Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel lSl marked conforming to lS 5290 (Type -A) with blank Gunmetal cap and chain as required. |
| 8 | Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with Gl wire,rivets etc. conforming to lS 636 (type-A) as required. |
| 9 | Supplying and fixing FirsfAid Hose Reel with MS construction spray painted in Post office Red,conforming to lS 884 with upto date amendments,complete with the following as required.20 m. long 20 mm (nominal internal)dia water hose Thermoplastic (Textile reinforced) Type -2 as per lS: 1258520 mm (nominal internal) dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall.Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe |
| 10 | Supplying and fixing of hose cabinet of size 1200 mm x 2000 mm x 600 mm made of 1.6 mm thick Sainless Steel Sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate internal/external hydrant with butterfly valve, 2 Nos. 30 mtr. long Hose pipe, 1No. branch pipe, mounted on wall OR raised. |
| 11 | Supply, installation, testing and commissioning of pressure switches (INDFOSS IPS 100 or approved equivalent) including making connections with the control panel and the pressure vessel complete in all respects.( MAKE- INDFOS ) |
| 12 | Supply, Installation,Testing and Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with all accessories as per direction of Engineer-in-charge.(H guru or Equivalent make) |
| 13 | Cast Iron Butterfly valve (PN1.0) with D.I disc, Hand lever operated, Slim line as per IS: 13095 ISI marked with flanges, bolts, nuts, rubber insertions/ compressed asbestos gasket etc. (MAKE-KARTAR/RONAK/NEW AGE /EQV STD ) 100 mm Dia |
| 14 | Supply and laying PVC insulated and sheathed armoured cable of 1 KV copper conductor including supplying and making end terminations with brass compression glands.(MAKE--FINOLEX / POLYCAB / HAVELLLS )Cu. 2.5 Sq.mm. – 4 core for Pump |
| 15 | Cu. 1.5 Sq.mm. – 2 core instrumentatioin |
| 16 | Supply and fixing of G.I.Earthing Strip 25 mm x 3 mm with Saddles,screw,sleeve jointing strip etc complete work. ( Motor to MCC ) |
| 17 | Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 18 | Supply, Installation of Pump protection shed on terrace made by structural steel & sheet |
| 19 | Supplying and fixing 2 Way Fire Bridge inlet Connection of CI body with 2 No. Gun Metal male instantaneous inlet couplings complete with cap and chain as required. For 100 mm dia M.S. Pipe connection conforming to lS : 904 as required With brick platform & duly painted with Post office red externally and white internally with synthetic enamel paint cornplete in all respect, for external hydrant, as required. |
| 20 | Providing & fixing Air vasel with air release valve having rubber ball ( of suitable range and calibrated) on top of each riser with socket weld / flanged inlet connection (Make -Kartar/DRP/Eqv std) - 250 mm Dia - Core Cutting of Hole in RCC /Wall / Beam and filling the same. |
| 21 | Providing and Fixing double flanged ‘Y’ type strainer with cast iron body and stainless steel mesh/ screen SS: 316 complete with companion flanges bolts, nuts, rubber insertions etc. ( MAKE-KARTAR /EQV STD )- 100mm Dia |
| 22 | Supply & Installation of 50 gm aerosol based Manual Fire Extinguisher (Duration:10-20 sec) , EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction ofEngineer-in-Charge. Replacement warranty on the product shall be 3 years and shell-life of 5 years. Make-Pyrogen/Genefire/Stat-x |
| 23 | Supply & Installation of 500 gm Portable Aerosol based Automatic triggering through linear heat detection cable/electrical initiation Fire Extinguisher (Coverage: 5 m3) , EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction ofEngineer-in-Charge. The triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. Replacement warranty on the product shall be 3 years and shell-life of 10 years. Make-Pyrogen/Genefire/Stat-x/Ceasefire |
| 24 | Supply & Installation of 3.3 Kg Manual aerosol based Fire Extinguisher covering 150m3 for big fire (Throwable unit) , EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction ofEngineer-in-Charge. Replacement warranty on the product shall be 3 years and shell-life of 10 years. Make-Pyrogen/Genefire/Stat-x |
| 25 | Supply & Installation of 8 gm Portable Aerosol based Automatic Fire Extinguisher (Coverage: 0.008 m3), EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction of Engineer-in-Charge. Replacement warranty on the product shall be 3 years and shell-life of 10 years. Make-Pyrogen/Genefire/Stat-x |
| 26 | FIRE EXTINGUISHERSupplying, installing and commissioning of ISI ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type,Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax) |
| 27 | Supplying, installing and commissioning of CO2 Type 4.5 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax) |
| 28 | Supply and installation of linear heat detection cable compatible with aerosol based fire extinguisher as per the direction of Engineer-in-charge. Make-Pyrogen/Genefire/Stat-x |
| 29 | Fire buckets (3 nos) (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter \\"FIRE\\" in black out side and handle with mounting bracket. |
| 30 | AUTOMATIC FIRE DETECTION SYSTEM Supplying, installation, testing and commissioning of Addressable Multi Detector(Smoke cum Heat) complete with base and isolator as per direction of Engineer-in-charge. |
| 31 | CONTROL PANEL Providing S.I.T.C of Microprocessor based Addressable Fire Alarm Control Panel (2 Loop) suitable for serving the followingg detectors & Devices in maximum with LCD display, complete with) 2 Nos 12 Volt 40 Ah SMF battery, Battery backup and also provision for 2 Nos potential free Normally open contact per loop to be used for interlocking of AHUs in the event of fire as per direction of Engineer-incharge. |
| 32 | MCP Supplying, installing ,testing and commissioning of break glass type Manual call point . The Manual call point with monitor module shall be single stage type with all accessories and suitable sinages complete., the Manual call point shall be as per technical specification. and shall be of EN and LPCP listed. |
| 33 | Electronic Hooters Supplying, installing ,testing and commissioning of Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete and as per technical specification. The devices shall be of EN and LPCP listed (Make: Bosch or Equivalents) |
| 34 | Wiring Supplying and drawing of 2X1.5 sq.mm PVC insulated PVC Sheathed FRLS cable in the existing surface/ recessed conduit with all accessories as per direction of Engineer-in-charge. |
| 35 | Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25mm dia |
| 36 | FF EXIT SIGNAGESIGNAGES: SITC flexyl of Photoluminescent based Glow-in-the-dark sheeting with luminious properties enclosed in a weather-proof UV stabilized film with UV screen printing by imported inks pasted over 3 mm Thick Cast Acrylic Sheet with the Protection of 3 mm Thick Cast Acrylic from Front side with stud type mirror screw with lifespan of 5 years, visible upto 4-6 hrs in total darkness for floor indication, fire exit, hydrant, hose reel, fire extinguisher, MCP, fire alarm panel, in case of fire, lift, alarm valve signages Please Enable Macros to View BoQ information |
