|
| 1 | Construction of Aganwadi Building worksEarth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. proper completion of works. As per schedule of DSR-2.8.1 Excluding GST |
| 2 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. proper completion of works. As per schedule of DSR-2.25A Excluding GST |
| 3 | Providing and laying Cement concrete 1:4:8 (1 cement : 4coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation proper completion of works. As per schedule of DSR-4.1.8 Excluding GST |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. As per schedule of DSR.-2.27 Excluding GST |
| 5 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos /Lindane E.C. 20% with 1% concentration As per schedule of DSR-2.35.3 Excluding GST |
| 6 | Providing and laying in position specfied grade of reinforcement cement concrete 1:1.5:3 (1 cement,1.5 coarse sand zone-iii,3 graded stone aggregate 20mm. (Nominal size), excluding the cost of centering,shuttering,finishing & reinforcement. All work up to plinth level. As per schedule of DSR.-5.1.2 Excluding GST |
| 7 | Reinforcement cement concrete work in beam, suspended floors,roof having slope up to 5% andings, balconies, shelves, chajjas, lintels, bands,plain windows sills,stair case & sprial stair case above plinth up to floor five level excluding the cost of centering,shuttering,finishing & reinforcement with 1:1.5:3 (1 cement,1.2 coarse sand zone-iii,3 graded stone aggregate 20mm. (Nominal size) As per schedule of DSR.-5.3 Excluding GST |
| 8 | Provinding & Laying of Centering, shuttering inluding strutting, proping etc. & removal of form for Foundations, footings, bases of columns, etc. for mass concrete. As per schedule of DSR.-5.9.1 Excluding GST |
| 9 | Provinding & Laying of Centering, shuttering inluding strutting, proping etc. & removal of form for Suspended floors, roofs, landings, balconies and access platform.. As per schedule of DSR.-5.9.3 Excluding GST |
| 10 | Provinding & Laying of Centering, shuttering inluding strutting, proping etc. & removal of form for Lintels, beams, plinth beams, girders, bressumers andcantilevers. As per schedule of DSR.-5.9.5 Excluding GST |
| 11 | Brick work with common burnt clay (non-modular) bricks of class-150 in foundation & plinth in. Cement morter 1:6 (1 cement:6 coarse sand) As per schedule of DSR.-6.2.2 Excluding GST |
| 12 | Brick work with common burnt clay (non modular) bricks of class-150 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) As per schedule of DSR.-6.4.2 Excluding GST |
| 13 | Half brick masonry with common burnt clay (non modular) bricks of class 150 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) As per schedule of DSR.-6.13.1 Excluding GST |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) 9.5.1 Second class teak wood 9.5.1.1 (35 mm thick shutters) As per schedule of DSR.-9.5.1.1 Excluding GST Single Leaf |
| 15 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) As per schedule of DSR-10.15.1 Excluding GST |
| 16 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). As per schedule of DSR-9.53 Excluding GST |
| 17 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). As per schedule of DSR-10.13.1 Excluding GST |
| 18 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding As per schedule of DSR-9.48.1 Excluding GST |
| 19 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. As per schedule of DSR-10.3 Excluding GST |
| 20 | Fixing of Door, chaukhats in position as per direction of Engineer in charge as per schedule of DSR Excluding GST |
| 21 | Fixing of Window, chaukhats in position as per direction of Engineer in charge as per schedule of DSR Excluding GST |
| 22 | Fixing of Ventilator, chaukhats in position as per direction of Engineer in charge as per schedule of DSR Excluding GST |
| 23 | Steel reinforcment for ground floor R.C.C work including strainghtening cutting bending placing in position & binding all complete up to plinth level. Thermo machanically treated bars of grade Fe-500D or more. As per schedule of DSR-5.22.6 Excluding GST |
| 24 | 15 mm cement plaster on plinth plaster of mix : 1:4 (1 cement: 4 coarse sand) As per schedule of DSR- Excluding GST |
| 25 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) As per schedule of DSR- Excluding GST |
| 26 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand. (2.25FM) As per schedule of DSR-13.5.2 Excluding GST |
| 27 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. As per schedule of DSR-13.4.2 Excluding GST |
| 28 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate As per schedule of DSR-11.3.1 Excluding GST |
| 29 | Construction of drain of size of size 150 x 150 mm along with apron including excavation,base concrete 1:4:8 in thickness of 7.5cm of and brick work in foundation 1:4( 1 cement : 4 coarse sand) and brickwork in half brick thick in foundation 25mm thick cement concrete flooring and base 20mm thick plaster finished with neat cement. (Analysis) As per schedule of AR-1 Excluding GST |
| 30 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. As per schedule of DSR-11.37 Excluding GST |
| 31 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. As per schedule of DSR-8.31 Excluding GST |
| 32 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture As per schedule of DSR-13.48.3 Excluding GST |
| 33 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture As per schedule of DSR-13.48.2 Excluding GST |
| 34 | Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) As per schedule of DSR-13.44.1 Excluding GST |
| 35 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre As per schedule of DSR-13.41.1 Excluding GST |
| 36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per schedule of DSR-13.80 Excluding GST |
| 37 | Providing & fixing panes of glass with equal or equivalent I.S.I marked quality putty. Brads and springs and including supply of all materials and labour etc complete . 3.8 to 4.7 mm thick As per schedule of DSR-10.30.1 Excluding GST |
| 38 | Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . As per schedule of MR Excluding GST |
| 39 | Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 250mm x16 mm) As per schedule of MR Excluding GST |
| 40 | Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm As per schedule of DSR-13.48.3 Excluding GST |
| 41 | Providing and laying integral cement based water proofing treatment (brick coba )including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : (With average thickness of 120 mm and minimum thickness at khurra as 65 mm.) As per schedule of DSR-22.7.1 Excluding GST |
| 42 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. As per schedule of DSR-12.50 Excluding GST |
| 43 | 1st- SANITARYProviding and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests As per schedule of DSR-17.11 Excluding GST |
| 44 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern As per schedule of DSR-17.41 Excluding GST |
| 45 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. As per schedule of DSR-17.8 Excluding GST |
| 46 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board size 510x1040 mm bowl depth 250 mm As per schedule of DSR-17.10.1.1 Excluding GST |
| 47 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia As per schedule of DSR-17.28.1.1 Excluding GST |
| 48 | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per schedule of DSR-17.31 Excluding GST |
| 49 | Providing and fixing PTMT Bottle Trap for Wash basin and sink Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms As per schedule of DSR-17.70.2 Excluding GST |
| 50 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. As per schedule of DSR-17.71 Excluding GST |
| 51 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. As per schedule of DSR-17.73.2 Excluding GST |
| 52 | C.P. BRASS FITTINGSProviding and fixing unplasticised PVC connection pipe with brass unions 15 mm nominal bore As per schedule of DSR-18.21.2.1 Excluding GST |
| 53 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore As per schedule of DSR-18.49.1 Excluding GST |
| 54 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore As per schedule of DSR-18.53.1 Excluding GST |
| 55 | 2nd- INTERNAL SOIL /WASTE PIPE LINE Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm (Rainwater+soil+waste) As per schedule of DSR-12.43.2 Excluding GST |
| 56 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.(110 mm diameter) As per schedule of DSR-12.41.2 Excluding GST |
| 57 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. As per schedule of DSR-12.22Excluding GST |
| 58 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. As per schedule of DSR-12.44 Excluding GST |
| 59 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(110 mm bend) As per schedule of DSR-12.42.5.2 Excluding GST |
| 60 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(110 mm Shoe) As per schedule of DSR-12.42.6.2 Excluding GST |
| 61 | Providing and fixing of UPVC SWR pipe type -B confirming to IS -13592 including jointing the pipe with rubbing ring ,lubricant and UPVC SWR cupler confirming to IS -14735 ,ALSO Including excavation of trenches cutting of walls and holes and repairing the walls ,floors and refiling the trenches as before but excluding supply and cost of other fitting such as elbow bead ,tee and Y -tee including supply of all materials labour and t&p .Required for proper completion of the work. (110mm dia P.V.C. pipe) As per schedule of DSR Excluding GST |
| 62 | Providing and fixing of UPVC SWR pipe type -B confirming to IS -13592 including jointing the pipe with rubbing ring ,lubricant and UPVC SWR cupler confirming to IS -14735 ,ALSO Including excavation of trenches cutting of walls and holes and repairing the walls ,floors and refiling the trenches as before but excluding supply and cost of other fitting such as elbow bead ,tee and Y -tee including supply of all materials labour and t&p .Required for proper completion of the work. (75mm dia P.V.C. pipe) As per schedule of DSR Excluding GST |
| 63 | Providing and fixing of UPVC SWR door bend confirming to IS-14735. (75 MM) As per schedule of DSR Excluding GST |
| 64 | Providing and fixing of UPVC SWR door bend confirming to IS-14735. (110 MM) As per schedule of DSR Excluding GST |
| 65 | Providing and fixing of UPVC Nahani trap size 100/75mm ,100/90 mm confirming to IS -14735 self cleaning design fixed in pcc 1:2:4 and supply and fixing of 125mm dia heavt duty cp brass jali.As per schedule of DSR Excluding GST |
| 66 | Providing and fixing of UPVC SWR cowl confirming to IS-14735. ( 110 MM ) As per schedule of DSR Excluding GST |
| 67 | Providing and fixing of UPVC Plain TEE confirming to IS-14735. Size 75 X 75 X 75 MM As per schedule of DSR Excluding GST |
| 68 | Providing and fixing of UPVC Plain TEE confirming to IS-14735. Size 110X110X110 MM As per schedule of DSR Excluding GST |
| 69 | Providing and fixing of UPVC SWR door y confirming to IS-14735 ( 75MM.) As per schedule of DSR Excluding GST |
| 70 | Providing and fixing of UPVC SWR door y confirming to IS-14735 ( 110MM.) As per schedule of DSR Excluding GST |
| 71 | 3rd- INTERNAL WATER SUPPLY WORKSProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. (15mm dia nominal outer dia pipes) As per schedule of DSR 18.8.1 Excluding GST |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. (20mm dia nominal outer dia pipes) As per schedule of DSR 18.8.2 Excluding GST |
| 73 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Internal work-Exposed on wall (25mm dia nominal bore) As per schedule of DSR 18.9.3 Excluding GST |
| 74 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Internal work-Exposed on wall (32mm dia nominal bore) As per schedule of DSR 18.9.4 Excluding GST |
| 75 | Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore As per schedule of DSR 18.17.1 Excluding GST |
| 76 | Providing and fixing gun metal gate valve with wheel of approved quality. 32 mm dia nominal bore As per schedule of DSR 18.17.2 Excluding GST |
| 77 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. Capcity in Per Liters As per schedule of DSR 18.48 Excluding GST |
| 78 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore As per schedule of DSR 18.18.3 Excluding GST |
| 79 | SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE &WASTE SYSTEM - IExcavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia As per schedule of DSR 2.10.1.2 Excluding GST |
| 80 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design 150 mm diameter S.W. pipe As per schedule of DSR 19.3.2 Excluding GST |
| 81 | Providing and fixing square-mouth S.W. gully trap class SP-1 completewith C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be notless than 4.50 kg and frame to be not less than 2.70 kg as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation M-150 (150 x 100 mm size P type) As per schedule of DSR 19.4.2.1 Excluding GST |
| 82 | Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix Inside size 90x80 cm & 500cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg. As per schedule of DSR 19.7.1.1 Excluding GST |
| 83 | EXTERNAL WATER SUPPLY SYSTEM -IIProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm dia nominal bore As per schedule of DSR 18.9.4 Excluding GST |
| 84 | Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. 32mm As per schedule of DSR 18.17.2 Excluding GST |
| 85 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay M-150.(non modular) bricks of class designation. As per schedule of DSR 18.32.1 Excluding GST |
| 86 | SUB HEAD - I (Wiring)Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. (Primary Point) as required. As per schedule of DSR 1.8.3 Excluding GST |
| 87 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. As per schedule of DSR 1.12 Excluding GST |
| 88 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire) As per schedule of DSR 1.14.1 Excluding GST |
| 89 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire) As per schedule of DSR 1.14.2 Excluding GST |
| 90 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (4 X 16 sq. mm + 2 X 6 sq. mm) As per schedule of DSR 1.14.10 Excluding GST |
| 91 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (5/6 A switch) As per schedule of DSR 1.24.1 Excluding GST |
| 92 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (15/16 A switch) As per schedule of DSR 1.24.3 Excluding GST |
| 93 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required (4 Module (125mmX75mm) As per schedule of DSR 1.27.3 Excluding GST |
| 94 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required (6 Module (200mmX75mm) As per schedule of DSR 1.27.4 Excluding GST |
| 95 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required (8 Module (125mmX125mm) As per schedule of DSR 1.27.5 Excluding GST |
| 96 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.As per schedule of DSR 1.31 Excluding GST |
| 97 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. As per schedule of DSR 1.32 Excluding GST |
| 98 | Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box including connections, but excluding modular plate etc. as required. As per schedule of DSR 1.25 Excluding GST |
| 99 | Supplying & fixing brass batten/ angle holder or wall bracket including connection etc. as required. As per schedule of DSR 1.34 Excluding GST |
| 100 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. (2 run of cable) As per schedule of DSR 1.53.2 Excluding GST |
| 101 | Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V \\"C\\" curve TP MCB complete with connections, testing and commissioning etc. as required As per schedule of DSR 2.17 Excluding GST |
| 102 | SUB HEAD-II (Sub Main Distribution Board)Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCC B /Isolator) (8 way (4+24), Double door) As per schedule of DSR 2.4.3 Excluding GST |
| 103 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4+12), Double door As per schedule of DSR 2.5.1 Excluding GST |
| 104 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Single pole (C Curve) (for light & power circuits) As per schedule of DSR 2.10.1 Excluding GST |
| 105 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (100A, 4P, MCCB or equivalent.) As per schedule of DSR 2.13.3 Excluding GST |
| 106 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. As per schedule of DSR 1.27 Excluding GST |
| 107 | SUB HEAD- III (Fans & Light fittings)Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system. Supply of 1200mm sweep 3 blade energy saving Ceiling fan complete with assembling of blades, down rod, shackle insulator, canopy etc. As per schedule of DSR 19.1 Excluding GST |
| 108 | Supply & fixing of recess mounting round 10 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. As per schedule of DSR 19.1 Excluding GST |
| 109 | Supply & fixing of recess mounting round 18 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. As per schedule of DSR 19.1 Excluding GST |
| 110 | Supply & fixing of LED Tube Light with batten suitable wall mounted for up to 1x 20 watt LED tube light complete including tube etc complete in all respects. As per schedule of DSR 19.1 Excluding GST |
| 111 | Supply & fixing of LED Tube Light with batten suitable Ceiling mounted for up to 1x 20 watt LED tube light complete including tube etc on surface complete in all respects. As per schedule of DSR 19.1 Excluding GST |
| 112 | Supply & fixing of Mirror Light 10w LED with batten including light complete in all respect. As per schedule of DSR 19.1 Excluding GST |
| 113 | Supply & fixing the complete with frame for a exhaust fan of all sizes. As per schedule of DSR 19.1 Excluding GST |
| 114 | SUB HEAD- IV (Earthing)Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. As per schedule of DSR 5.4 Excluding GST |
| 115 | Providing & fixing 25 mm x 5 mm GI strip on surface or in recess for connections etc. as required.As per schedule of DSR 5.15 Excluding GST |
| 116 | SEPTIC TANK Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 mm width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. As per schedule of DSR 2.8.1 Excluding GST |
| 117 | Providing and laying in cement concrete 1:4:8 (1 cement : 4 fine sand : 8 graded Stone ballast 40 mm nominal size) and curing complete, including cost of form- work, in foundation. As per schedule of DSR-4.1.8 Excluding GST |
| 118 | Brick work with brick of M-150 in foundation & Plinth in cement mortar (1 cement : 4 coarse sand ) Septic tank As per schedule of DSR-6.1.2 Excluding GST |
| 119 | Reinforced cement concrete work in slab cover for septic tank 1:1.5:3 As per schedule of DSR-5.3 Excluding GST |
| 120 | Centering,shuttering inluding strutting,proping etc. & removal of form for suspended floors, roofs, landings, balconies and access platform. Excluding GST |
| 121 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. As per schedule of DSR-5.22.6 Excluding GST |
| 122 | 15 mm cement plaster inside of septic tank of mix 1: 4 (1 cement : 4 coarse sand) As per schedule of DSR 13.5.2 Excluding GST |
| 123 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate As per schedule of DSR-11.3.1 Excluding GST |
| 124 | Making Soak pit 1.25m diameter 2.5 mt depth including excavation disposal of surplus earth refilling it with coarse aggregateand RCC slab on top 1 :2 :4 with 450mm dia manhole cover and frame complete as required as per the standard design. As per schedule of DSR-19.32.1 Excluding GST |
| 125 | Providing & fixing 75 mm dia vent pipes. As per schedule of DSR 17.35.2.1 Excluding GST |
| 126 | BORING & INSTALLATION OF INDIA MARK - II HAND PUMP India marka -II hand pump ISI marked with cylinder & connecting rods complete as per direction of E/I Excluding GST |
| 127 | 110mm PVC pipe 6kg/sqcm pressure. |
| 128 | 110mm dia PVC strainer 4mt. Long ribbed with standerd trap & spacials. as per direction of E/I Excluding GST |
| 129 | Nylon mesh narial rope arround strainer. as per direction of E/I Excluding GST |
| 130 | Supply of medium class G.I. pipe 32mm 'B' class. as per direction of E/I Excluding GST |
| 131 | Providing necessary boring T&P including making arrangement of water for boring 150mm dia bore by plam pressure method in all type of streta complet item. ( 30.00 mt. BGL.) as per direction of E/I Excluding GST |
| 132 | Providing necessary boring T&P including making arrangement of water for boring 150mm dia bore by plam pressure method in all type of streta complet item. (Beyond 30.00 mt.) as per direction of E/I Excluding GST |
| 133 | Supply of labour T&P and jointing & lowering of PVC pipe consisting of 110mm , 63mm,50mm dia bore long ribbed PVC strainer complete ite.(30.00 mt. BGL.) |
| 134 | Supply of labour T&P and jointing & lowering of PVC pipe consisting of 110mm , 63mm,50mm dia bore long ribbed PVC strainer complete ite. (Beyond 30.00 mt.) as per direction of E/I Excluding GST Please Enable Macros to View BoQ information |
