|
| 1 | Excavation in all kinds of strata including boulders up to 0.6 m diameter and placing the excavated stuff neatly in dump area as directed by work in charge including cost of all materials, labour, resign bed and ides to required level and profile etc. complete with lead up to 15 m and 6 m lift. Excavation in Soil and Soft Murum |
| 2 | Excavation in all kinds of strata including boulders up to 0.6 m diameter and placing the excavated stuff neatly in dump area as directed by work in charge including cost of all materials, labour, resign bed and ides to required level and profile etc. complete with lead up to 15 m and 6 m lift. Excavation in Hard Murum |
| 3 | Excavation in all kinds of strata including boulders up to 0.6 m diameter and placing the excavated stuff neatly in dump area as directed by work in charge including cost of all materials, labour, resign bed and ides to required level and profile etc. complete with lead up to 15 m and 6 m lift. Excavation in Soft Rock |
| 4 | Excavation in all kinds of strata including boulders up to 0.6 m diameter and placing the excavated stuff neatly in dump area as directed by work in charge including cost of all materials, labour, resign bed and ides to required level and profile etc. complete with lead up to 15 m and 6 m lift. Excavation in Hard Rock |
| 5 | Dewatering by pumping out water collected with 10 to 19 HP Diesel and Electrical pumps including cost of all materials, machinery, labour, providing sump and all other ancillary operations whenever necessary etc. complete |
| 6 | Providing and fixing steel rock bolts / Anchor bar (25 mm dia.) of 2.1 m length with mechanical / wedge type anchorage including drilling holes, providing tapered steel wedge, plates and nutes and tighting the same by torque wrench after hardening of cement grout. Including all machinery labour charges with all lifts. |
| 7 | Providing and laying in situ cement concrete of grade M- 15 of trap / granite / gneiss / quartzite / graded metal for foundation and bedding with Concrete Mixer including placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed.M-15 (40 MSA) (Cement 5.20 bag/CuM) |
| 8 | Providing Reinforcement Steel for PCC Work includes all dia. bars, transportation charges, loading and unloading charges with cutting, bending , hooking and binding etc. complete. |
| 9 | Manufacturing with QAP and fabrication of KT weir needle straight type size 2.10 x 0.5 m weight as per relevant Indian Standards with all material, Mild Steel confirming to IS 2062 Rubber seal confirming to IS 4623 and welding electrodes AWS E6013 for general weld joints. It includes all materials, machinery charges, 1 km lead charge of transportation, loading and unloading charges of Gate parts of Site, Inspection and quality control charges, painting with one cote of zinc rich primer and two coats of epoxy paint applied to structure etc. complete New Needle |
| 10 | Manufacturing with QAP and fabrication of KT weir MS Steel Beam and Channel weight as per relevant Indian Standards with all material, Mild Steel confirming to IS 2062 Rubber seal confirming to IS 4623 and welding electrodes AWS E6013 for general weld joints. It includes all materials, machinery charges, 1 km lead charge of transportation, loading and unloading charges of Gate parts of Site, Inspection and quality control charges, painting with one cote of zinc rich primer and two coats of epoxy paint applied to structure etc. complete MS Steel Beam and Steel Channel |
| 11 | Provinding pianting Name Board of aproved colour and Letter size on front side of NOF with details of works. |
| 12 | Providing Royalty Charges (CSR 2022-23 Gen.Note Para 2) (As per Separate Sheet Attached)For Sand |
| 13 | For other Materials |
| 14 | Insurance 1 % ( To be put in tender but % above & below will not be applicable to this item as the it has to be paid as per rates decided by Govt of Maharashtra) Please Enable Macros to View BoQ information |
