|
| 1 | Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in charge. All kinds of soil. |
| 2 | P/L of solling stone hand packed in foundation beds |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 4 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement :6 coarse sand:12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand. |
| 5 | Coursed rubble masonry ( firstsort) with hard stone in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 6 | Supplying and filling in plinthwith sand under floors, including watering, ramming, consolidating and dressing complete. |
| 7 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns |
| 9 | Marble stone flooring with 18mm thick marble stone,as per sample of marbleapproved by Engineer-in-charge, over 20mm (average) thick base of cement mortar 1:4 (1cement :4coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Black Zebra |
| 10 | Providing hoisting and fixing trusses/ purlins /rafters/ posts/post plates or like components of 1st class budloo/fir wood including cost of screws etc complete. |
| 11 | Providing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks ,bolts and nuts 8mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surfaces),excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m3. |
| 12 | Providing and fixing 12 mm thick frameless toughened glass frame of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 13 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with;2nd class kail wood. |
| 14 | Providing and fixing plain jaffri of 35x10 mm laths placed 35mm apart (frames to be paid separately), including fixing 50x12 mm beading complete with: Second class teak wood. |
| 15 | French spirit polishing : Two or more coats on new works including a coat of wood filler. |
| 16 | P/F of plywood both side laminated for ceiling and partions 12 mm thick |
| 17 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour,design & pattern. |
| 18 | P/F of copper FPR havels wire ranging from 1.5 sqmm to 4 sqmm along with earthing and service line, pvc conduits, MCBs ranging from 6 Amp to 64 Amp, electric switchs ,plates ,LEDs , flexible pole lights, focus lights all items complete job. |
| 19 | Carraige of sand and bajri by MT from source to site of work for an average lead of 5 Km. |
| 20 | Carraige of cement/steel by MT from source to site of work for an average lead of 5 Km. |
| 21 | Carraige of stones by MT for an average lead of 5 Km. Please Enable Macros to View BoQ information |
