|
| 1 | Earth work in excavation of foundation in hard soil with all lead and lifts including rough dressing breaking clods & leveling bed and lifts including rough dressing breaking clods & leveling bed and depositing the excavating materilas away from the working area etc. complete. |
| 2 | Providing and filling manually with the approved quality of sand in layers not exceeding 150mm thick including all labours, witering etc, required for the work including cost, conveyance, royality and taxes for finished item of works. |
| 3 | Providing Cement concrete (1:3:6) mix with 40mm nominal size stone aggregate in rigid pavement including compacting etc. |
| 4 | Fly ash brick masonry in cement mortar ( 1:6 ) in foundation & plinth cost, carriage, royalty etc. complete. |
| 5 | Fly ash brick masonry in cement mortar ( 1:6 ) in Super structure including cost, carriage, royalty etc. complete. |
| 6 | Providing and laying Reinforced cement concrete of M-20 grade with 20mm and down grade clean crusher broken granite chips aggregate of approved quality from approved quarry including hoisting, lowering & levelling in position to required level in each layer not exceeding 15cm thick including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering if necessary with cost, conveyance taxes royalty labour of all materials and including hire and running charges of machinaries T&P required for the work including supplying and working of pumps and cess as per the specification and direction of Engineer-in-charge. Ground floorC)Column & Beam |
| 7 | D) Lintel |
| 8 | E) 65mm avg. Chhaja & Windows seal |
| 9 | F) Roof slab |
| 10 | G) Stair case |
| 11 | Labour for cutting bending binding HYSD rod with cost , carriage etc. complete. |
| 12 | 12 mm thick cement plaster ( 1:6 ) including cement punning and bitumen painting over top of wall with cost carriage royalty etc. |
| 13 | 16 mm thick C.P in cement mortor (1:6) finished to smooth over brick walls after racking out the joints including watering & curing with cost & conveyance of all materials & labour with T & P required for the work with all taxes, royalties etc. complete as per the direction of E.I.C. |
| 14 | 6 mm thick C.P in cement mortor (1:4) in RCC surface including cost conveyance of all materials & labour with T & P required for the work with all taxes, royalties etc. complete as per the direction of E.I.C. |
| 15 | Fixing vitrified tiles(600 mmx600 mm) in floors treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles complete in all respect as per the direction of Engineer in Charge. |
| 16 | Fixing Vertified tiles in dados skirting, risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles. |
| 17 | Fixing Granite( Above 0.10 sqm upto 0.40 sqm ) in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. complete in all respect as per the direction of Engineer in Charge. |
| 18 | Finishing wall surface with acrylic wall putty ( water Based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete. |
| 19 | Wall priming one coat on new work with wall water bound primer of approved shade as per direction of Engg-in-charge. |
| 20 | Wall painting with Plastic emolsion paint two coats with any approved shade including cost of distemper on New Plastered surface including cost of distemper of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete. |
| 21 | Wall priming one coat on new work with wall water bound primer of approved shade as per direction of Engg-in-charge. |
| 22 | Wall painting two coats on new work with weather coat paint of approved shade as per direction of Engg-in-charge. |
| 23 | Supplying & fixing, of steel M.S. grills with all fitting and fixtures etc. incl. cost of all materials, labour etc. complete as per the direction of E.I.C. |
| 24 | Painting two coats with synthetic enamel paint over one coat primer to grill etc. complete as per the direction of E.I.C. |
| 25 | Providing fitting, fixing of Al. Door with OEL anodized Al. door section 9202 as vertical member, 9201 as top member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1885 including all cost of labour, T&P hire charges of drilling machine etc.complete with all taxes royalties & cess etc, complete in all floors as per direction of Engineer-in-charge. |
| 26 | Supplying , fitting , fixing up window ( sliding type ) made up Aluminium section 9778 as window frame 4095 ,4096 & 9777 ,3994 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading includingfran locking arrangement including all fitting including cost of materials all taxes , labour , T & P etc. complete as per directon of engineer -in - charge . |
| 27 | E.I. Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A |
| 28 | -do- Group B |
| 29 | -do- Group C |
| 30 | Recessed wiring to Fan Point in... -do- Group B |
| 31 | -do- Group C |
| 32 | Recessed wiring to Exhaust Fan Point in doGroup B |
| 33 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 34 | S/F of Angle holder replacing Ceilling Rose |
| 35 | Swich Boards S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 36 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 37 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 38 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 39 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover |
| 40 | 4 Modular box with base & cover |
| 41 | 6 Modular box with base & cover |
| 42 | 8 Modular box with base & cover |
| 43 | 12 Modular box with base & cover |
| 44 | Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1) |
| 45 | 2x2.5+1x1.5 (1.8.2) |
| 46 | 2x4+1x1.5 (1.8.3) |
| 47 | 4x6+2x2.5(1:8:10) |
| 48 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 49 | Circuit Breakers S/F of 'C' series SP MCB of 10 to 16A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 50 | S/F of 'C' series 4P MCB of 63A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 51 | S/F of 'C' series DP MCB of 16 amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 52 | S/F of 6Way (8+18) TPN Double Door Distribution Board ISI marked complete with all accessories and connection etc. as required (Make : Legrand / Hager / Scheider / Seimens) |
| 53 | EarthingS/F of Cu .Earth Plate Earthing 600 mm x600mmx3.15mm with Salt & Charcoal for Earth electrode (3:5)+(3.6) |
| 54 | S/L of 25mm x 5mm Cu. earth strip in 40 mm dia G.I.Pipe(3.11) |
| 55 | FittingsSupply and fixing of 230mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 56 | Supply and fixing of 300mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 57 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab / Klite / Panasonic) |
| 58 | Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) |
| 59 | S/F step type modular fan regulator |
| 60 | Supply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic ) |
| 61 | S/F of 10w Watt LED Bulb ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic ) |
| 62 | S/F of 18W LeD Squre (12\\"×12\\") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic) |
| 63 | S/F of 15A socket on 2Modular Board board for A.C |
| 64 | S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand) |
| 65 | CablesProvision of Armoured cable size 3 1/2 x 25sqmm (24) |
| 66 | Laying of MV cable upto 25sqmm in ground (5.1.1) |
| 67 | Laying of MV cable upto 25sqmm on surface (5.5.1) |
| 68 | PanelsSupply & fixing of 100 A TPN Panel board 1. 100A MCCB (Make : Legrand / Hager / Scheider / Seimens)-1No.2. TPN Busbar-1set with DC Gland for 25mmsq aluminium armoured cable and 3. 4Pole Spreaders link (63A-200A)4. 63Amp 4P Changeover-1No.5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) |
| 69 | P.H. Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. a) 110mm diameter U-PVC SWR pipes |
| 70 | 110mm U-PVC P-trap |
| 71 | 110mm U-PVC single junction door |
| 72 | 110mm U-PVC Double junction door |
| 73 | 110mm U-PVC door bend |
| 74 | 110mm U-PVC Offset |
| 75 | 110mm U-PVC plain bend |
| 76 | 110mm U-PVC vent cowl |
| 77 | 125 mm dia C.P Grating |
| 78 | 75mm diameter U-PVC pipes |
| 79 | 75mm U-PVC Plain bend |
| 80 | 75mm U-PVC Door bend |
| 81 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.(a) Ground floor |
| 82 | 1st Floor |
| 83 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.(a) Ground floor |
| 84 | 1st Floor |
| 85 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.a) 250 mm thick wall |
| 86 | Supplying all materials, labour, T&P and laying in trenches U-PVC (4 Kgf/cm2) ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and providing bed concrete in P:C:C (1:4:8) using 40 mm size metal and allround encasing the pipe with refilling of trenches etc all complete as per P.H specification and direction of the E.I.C.a) 110 mm dia U-PVC Pipe Sewerage line with all round encasing ( IS-4985/2000- 4 Kgf/Cm2) |
| 87 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.(a) 580mm size Orissa pan(Hindware/Parryware) |
| 88 | Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) & PVC Seat cover etc all complete as per specification and direction of the E.I.C. EWC with 'P' & 'S' Trap plain and Seat Cover(Hindware/Parryware) |
| 89 | Supplying all materials, labour, T&P and Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C |
| 90 | Supplying all materials, labour, T&P and fixing the Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 91 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, Fly ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C. a) Inside size 760mm x 760mm x 460mm |
| 92 | Additional Depth |
| 93 | Supplying all materials labour T&P and construction of Man hole chamber of the following sizes with cc (1:3:6) using 40mm size hg metal on bed 1st class KB brick work in cm (1:6) moulding and shaping the channel inside and benching with cc (1:1.5:3) using 12mm size hg chips 12mm thick cp (1:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m.h. cover, e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of EIC.(a) Inside size 910x910x910mm |
| 94 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap ,Fly ash Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.Inside size 250mm x 250mm |
| 95 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and Fly ash brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.a) 1.20 m diax 2.0 m deep soakway pit |
| 96 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.a) 0.91 m diax 2.10 m deep soakway pit |
| 97 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. a) 20mm dia C- PVC pipes (Internal) |
| 98 | 25mm dia C-PVC pipes (Internal) |
| 99 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking GI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.a) 250mm thick wall |
| 100 | supplying all materials, labour, T&P and cutting grooves in pucca Floors, and walls for taking G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:3:6) including finishing with 12mm C.P (1:3) complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C. |
| 101 | Supplying all materials, labour T&P and fixing wash basins with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. a) 550mmx400mm W.H.basin (Hindware/Parryware) |
| 102 | W.H.B Pedestrial |
| 103 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.a) Fixing of Glass Mirror 600mm x 450mm size B.E Mirror |
| 104 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. a) 20mm x 450mm long CP towel rail |
| 105 | b) C.P Towel ring (St) |
| 106 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. CP soap holder |
| 107 | Supplying all materials, labour T&P and fixing Stainless Steel Kitchen Sink with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for Sink including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. a) 550 x 450 x 200mm stainless steel kitchen sink |
| 108 | Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.(a) Initial lift upto 1.50 mtr |
| 109 | From 1.50mtr to 3.00mtr |
| 110 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. |
| 111 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 112 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 113 | Supplying all materials,labour, T&P and providing Brick work with Fly ash Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a) In Foundation and Plinth in C:M (1:3) |
| 114 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.a) 20mm thick C.P with C.M. (1:4) |
| 115 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 116 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.a) R.C.C Slab |
| 117 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 118 | Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 119 | Supplying all materials, labour, T&P and making M.S. Step Iron in 12mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 120 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 121 | Supplying all materials, labour, T&P and providing 110mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 122 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 123 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 124 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C. a) 32mm dia PVC-ASTM pipes (External) |
| 125 | 25mm dia PVC-ASTM pipes (External) |
| 126 | 25mm dia HDPE pipes |
| 127 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.(Jaquar make) a) 15mm dia CP Bib Cock |
| 128 | 15mm dia CP Angle Stop Cock |
| 129 | 15mm dia CP Pillar Cock |
| 130 | 15mm dia CP (L.B) Bib Cock |
| 131 | 15mm dia CP Heath Fuccet |
| 132 | 15mm dia 2-in-1 Bib Cock |
| 133 | 25mm dia Brass Full Way Valve |
| 134 | 32mm dia Brass Full Way Valve |
| 135 | 15mm dia CP Extension Nipple |
| 136 | 15mm dia CP Flange |
| 137 | Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. a) 10 lit PVC L/L Cistern |
| 138 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.a) 2000 lits capacity on the roof of 1st. floor |
| 139 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.a) 2000 lits capacity on the roof of 1st floor Please Enable Macros to View BoQ information |
