|
| 1 | Earth work in filling for restoration of Rangawan Dam including lead up to 1km and initial lift with levelling and dressing as per direction of Engineer-in-charge. |
| 2 | Earth work excavation in foundation of walls, in mar, kabar and rankar mixed soil with disposal lead up to 30m and lift up to 1.5m including dressing making profile and manual compaction. |
| 3 | Earth work in Mar, kabar, Rankar, And kankar mixed soil in filling in Approch Road & Service Road and other work including lead up to 1km including dressing making profile and manual compaction etc. complete work |
| 4 | Laying Local sand including all cost of labour, material T&P etc. |
| 5 | Laying C.C. (1:3:6) M-10 with cement coarse sand and 45-63mm stone Ballast i/c all cost of labour, material, T&P with mechanical mixing proper compaction etc. complete work. |
| 6 | R.C.R. Stone masonary 1:4 with cement and coarse sand mortar including all cost of labour, material T&P etc. complete work |
| 7 | Laying cement concrete (1:2:4) M-15 with cement coarse sand and 6.7-11.2mm stone grit i/c all cost of labour, material, T&P with mechanical mixing proper compaction etc. complete work. |
| 8 | Supplying & Laying of 8 swg GI Wire crate size 2.0x1.5x1.0 m per No. in launching apron of jack bundh including all cost of labour, material T&P etc. complete work |
| 9 | Supplying & Laying of 8 swg GI Wire crate size 2.0x1.5x0.60 m per No. in Slop of jack bundh including all cost of labour, material T&P etc. complete work |
| 10 | S/L stone boulder in pitching and launching apron in wire crate including all cost of labour, material T&P Excluding cost of wire crate etc. complete work |
| 11 | Damping stone boulder (25-60)kg including cost of material etc. complete |
| 12 | Providing and laying stone boulder pitching (25-60)kg of sluice channal Slop & flooring including cost of material etc. complete |
| 13 | Grouting stone boulder pitching(1:4) cement and coarse sand including all cost of labour, material T&P etc. complete work |
| 14 | Cement Pointing(1:2) cement and coarse sand mortar including all cost of labour, material T&P etc. complete work |
| 15 | R.C.C (1:1.5:3) M-20 with cement coarse sand and 20mm stone grit i/c all cost of labour, material, T&P with mechanical mixing proper compaction etc. complete work. |
| 16 | Reinforcement for R.C.C. work including cutting, bending, and placing with all cost of materal, labour and T&P etc. |
| 17 | Centering & shuttering for R.C.C. Slabs, lintels & simple beams including all materials & t&p |
| 18 | Dismentling lime or plain cement concrete including all cost of labour, materials & t&p |
| 19 | R.C.C. (1:1:2) M25 with cement coarse sand and 20mm size stone grit including all cost of material labour etc. complete |
| 20 | Fabrication and fixing of mild steel/ iron work in grill, gates ,railing ,door,window, frames including cutting, drilling, welding,riveting and fixing hinges where necessary with fixing in position including cost of all material labour t&p etc. required for proper completion of work |
| 21 | Cement Plaster (1:4) 12.5mm thick on Stone masonary with cement and coarse sand mortar including all cost of labour, material T&P etc. complete work |
| 22 | Distempering (oil bound distemper) two coat of premium quality (burger asian nerolac) over one priming coat of cement primer on old surface treated including cost of material labour t&p etc required for proper complrtion of work |
| 23 | Finishing wall with premium acrylic exterior paint with silicone additive of required shade new work two or more coats applied @1.43litre/10 sqm over and including priming coat of exterior primer @2.20kg/10sqm on new surface including cost of labour, material, t&p etc. complete work |
| 24 | E/W Excavation of removal of slush in Seepage dam including initial lead and lift with all complete. |
| 25 | Dismentling and Relaying dry stone boulder pitching including internal lead and lift with all complete |
| 26 | Supplying and laying dry stone Khanda pitching in Seepage drain and Cross Drain including all cost of material, labour T&P etc. all complete. |
| 27 | Bricks masonary with 1:4 cement sand mortar i/c all cost of material labour T&P etc. |
| 28 | Scrapping old colour or white washing or Distemper surface in including disposal of refuse as directed by the Engineer-in-charge |
| 29 | Dismentling existing plaster, including disposal of refuse as per directed by Engineer-in-charge. |
| 30 | Providing and applying white cement based putty of average thinkness 1mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete. |
| 31 | Fabrication and fixing of mild steel/ iron work in grill, gates ,railing ,door,window, frames including cutting, drilling, welding,riveting and fixing hinges where necessary with fixing in position including cost of all material labour t&p etc. required for proper completion of work |
| 32 | Painting one coat of red oxide primer on steel surface after sand papering and cleaning of surface including cost of all material ,labour t&p etc required for proper completion of work |
| 33 | Painting two coat of synthetic enamel paint on new surface (excluding cost of primer) superior quality such as luxol, higloss, apcolite, superiac, dulux, including cost of all material ,labour t&p etc required for proper completion of work |
| 34 | P/L of 8 to 10 mm thick ivory or light shade vitrified tiles of (600mm x 600mm) size in flooring or skirting laid with 1:3 cement mortor finishing with cement slurry & with pigment grouting & polishing complete including all material, labour, t&p etc. required for proper completion of work Excluding base concrete |
| 35 | Providing & Laying of rubber moulded zig-zag interlocking concrete block pavement having thickness 80mm with preparation of sub base including filling joints with snad including all cost of labour, material T&P etc. complete work |
| 36 | Providing and fixing panelled or panelled and glazed shutters for door windows and clerestory windows fixing with but hinges of required size with necessary screws all complete as per direction of engineer -in-charge 35 mm thick shutters of second class teak wood |
| 37 | Providing and fixing fly/mosquito proof galvanized M.S. wire gauge to windows and clerestory using wire gauge with average width of aperture 1.4mm in both directions with of dia 0.63mm withsecond class teak wood beading 62 mmx19 mm all complete |
| 38 | P/F Wash hand basin 550x400mm size of white glazed earthen ware including supply of all materials labour t&p etc. complete |
| 39 | P/F first quality Orissa pattern type white glazed earthen ware ISI marked wc pan size 580mm with 10 liters flushing cistern including supply of all materials labour t&p etc complete |
| 40 | P/F Flat back or angular front lipper urinal basin of white galazed earthen ware 465x355x265mm including supply of all materials labour t&p etc. complete |
| 41 | P/F Mirror of atul make with indian polish of 600x450mm size with bevelled edge including supply of all materials labour t&p etc. complete |
| 42 | P/F C.P. Brass towel rail 750x20mm together with pair of cp brass brackets to fit the towel rai including supply of all materials labour t&p etc required for proper work complete |
| 43 | Wiring point for light with 1.5 sq mm frlsh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in the wall complete with 14 swg copper earth continuity wire gp box piano type switch & ceilling rose/angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect as directed including matching colour wash |
| 44 | Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt confirming to ip66 protection complete in all respect CAT- AAA |
| 45 | Supply and fixing low density polythene tank sintex or equivalent |
| 46 | P/F 20 mm dia B - class (jindal, j.t.c. make) isi marked g.i. pipe complete with G.I. specials such as bends tee socket cross clamps includes concealed G.I.fitting where required cutting and making good the walls etc. and materials labour t&p etc. complete (internal work) |
| 47 | Making water connection of G.I. pipe line with G.I.main (25mm to 40mm) dia by providingand fixing brass ferrule (25 mm dia) G.I. union and G.I. nipple including cutting and threading the pipe building complete work including supply of all material labour and t&p etc. |
| 48 | Supply and fixing c.p. brass stop cock heavy quality 15 mm dia ISI marked including cutting and threading the pipe if required including supply of all materials labour and t&p etc required for proper completion of the work |
| 49 | Supply and fixing c.p. brass bib cock heavy quality 15 mm dia (400 gms) ISI marked including supply of all materials labour and t&p etc required for proper completion of the work |
| 50 | Cement Concrete 35mm thick in floor (1:2:4) cement and coarse sand & stone grit 6.7-11.2 mm including all cost of labour, material T&P etc. complete work |
| 51 | Wiring point for plug with 1.5 sq mm frlsh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel concealed in the wall complete with 14 swg copper earth continuity wire gp box piano type switch & ceilling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect including matching colour wash |
| 52 | Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq mm pvc insulated single core aluminium conductor cable in heavy gauge rigid steel concealed in the wall complete with 14 swg GI earth continuity wire gp box piano type switch & ceilling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect as directed including matching colour wash |
| 53 | Providing and fabrication MS Sign board of size 4'x3' using ISA 40X40X6 mm and 25x3 mm flat iron bracing with 18swg sheet with one coat of red oxide primer to be fixed at a level og min.3' from ground and 2' deep into the ground with 3\\" angle cut and turend to opposite side to make a hold fast i/c all cost of labour, material, t&p etc. |
| 54 | Providing & fixing( 5+2+2)kw of grid solar power plant {Off - Grid} including all cost of material labour T&P etc. Complete |
| 55 | P/F first quality indian type white glazed earthen ware ISI marked wc pan size 580mm with 10 liters flushing cistern including supply of all materials labour t&p etc complete |
| 56 | Fixing 6mm china glazed tiles (White or coloured) in flooring or in skirting or in dado laid in 1:3 cement, approved coarse sand mortar finished with white or coloured cement slurry jointed and polishing complete Excluding cost of all materials for tile size about 150mm x 150mm |
| 57 | Supplying & fixing of Pre cast Boundary wall of M25 Grade, including all cost of labour, material and T&P etc. As per instruction Of Engineer-in-Charge Post Size (150x150x2400)mm Panel size (2100x300x50)mm |
| 58 | Cutting heavy under growth, and bushes up to 7.5 cm dia meter including removal of roots with collection and removal. |
| 59 | Laying of Bricks i/c all cost of material labour T&P etc. |
| 60 | Cement Plaster(1:4) 12.5mm thick on Brick masonary with cement and coarse sand mortar including all cost of labour, material T&P etc. complete work |
| 61 | Jungle clearance from toe to toe of both banks.(vi) On Dams tanks and bundhies. |
| 62 | Providing and laying of LDPE film on footing box i/c cost of all material, labour and T&P etc. required for proper completion of work as per direction of Engineer-in-charge. |
| 63 | Fixing of RCC precast boundry piller including cost of all material,labour and T&P etc. required for proper completion of work as per direction of Engineer-in-charge. |
| 64 | Wet percussion drilling 35to75mm dia holes in open space for grouting or anchor etc. vertical or at specified including in masonry concrete or rock incluing flushing and routing of holes up to 30 minutes 0 to 10 vertically downloads |
| 65 | Providing and fixing Ist Quality glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of Steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 66 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever equired) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastenersetc.). |
| 67 | Mild Steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. (When not included in an over all rats wrought to requird from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, Chaukhats nosing. |
| 68 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (Hold fast lugs or dash fastener shall be paid for separately 9.1.2 sal wood cum 116520.30 |
| 69 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S plates, square or round bars etc. including priming coat with approved steel primer all complete 9.48.2 Fixed to openings/wooden frames with rawl plugs screws etc. kg |
| 70 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63mm for doors, windows and clerestory windows with hings and necessary screws : 9.27.1 35mm thick shutters 9.27.1.1 with ISI marked M.S. pressed butt hinges bright finished of required size 9.27.1.1.1 second class teak wood. |
| 71 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixied with C.P. Brass screws and pVC sleeves etc. wherever necessary Complete. |
| 72 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 9.75.1 300x16x5 mm |
| 73 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :9.74.3 150x10 mm |
| 74 | Providing and fixing bright finished brass handles with screws etc. complete: 9.81.1 125 mm |
| 75 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 76 | Providing and fixing aluminium dia cast body tubular type universal hydraulic door closer (Having brand logo with ISI, IS : 3564, embossed on the body door weight upto 35kg and door width upto 700mm), with necessary accessories and screws etc. complete. each |
| 77 | Providing and fixing fly proof stainless steel grade 304 wire gauge to windows and clerestory windows using wire gauge with average wideth of aperture 1.4 mm in both directions with wire of dia. 0.50mm all complete 9.135.1 with 2nd class teak wood beading 62x19mm sqm |
| 78 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture. |
| 79 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.3.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 80 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 81 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : |
| 82 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm dia nominal bore |
| 83 | Providing and fixing G.I. pipes complete with G.I. fitting including trenching and refilling etc 32 mm dia nominal bore |
| 84 | Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipe, having thermal stablity for hot & cold water supply, including all CPVC Plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 25mm nominal dia Pipes |
| 85 | Providing and fixing C.P. brass long body bib cock of approved quility conforming to IS standards and weighting not less than 690 gms. 15 mm nominal bore |
| 86 | Providing and fixing C.P. brass long cock (concealed) of standard design and of approved male conforming to SI:8931. 15 mm nominal bore |
| 87 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms of approved quality and colour. |
| 88 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 89 | Providing and fixing PTMT grating of approved quality and colour. |
| 90 | Providing and fixing soil, waste and vent pipes : 100 mm dia |
| 91 | Providing and fixing soil, waste and vent pipes : 75 mm dia |
| 92 | Providing and fixing plain bend of required degree. 100 mm dia |
| 93 | Providing and fixing plain bend of required degree. 75 mm dia |
| 94 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 95 | Providing and fixing uplasticised PVC connection pipe with brass unions |
| 96 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, .utting and making good the wallswherever required :17.10.1 Kitchen sink with drain board17.10.1.2 510x1040 mm bowl depth 225 mm |
| 97 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete |
| 98 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 99 | Wiring for light point/Fan Point/ Exsust fan point/ Call well with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface /recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm FRLS ?PVC insulated copper condurctor single core cable etc. as required. |
| 100 | Supplying and fixing metal box of 150mmx75mmx60mm deep (Nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A Socket outlet and 5/6 A piano type switch, connections painting etc. as required. |
| 101 | Supplying and fixing metal box of 180mmx100mmx60mm deep (Nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 and 15/16 A Socket outlet and 15/16 A Piano type switch, connections painting etc. as required. |
| 102 | Supplying and fixing 6A to 32 A rating, 240/415V, 10 KA \\"C\\" Curve miniature Circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissining etc. as required. |
| 103 | Supply and fixing factory wired H.P.F. box type flourcent tube light fitting suitable for 1x40 watt flourcent tube complete including tube etc. on surface complete in all respect of phillips/Bajaj/havells/crompt. Make. |
| 104 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 105 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 106 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 107 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 108 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6A switch |
| 109 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16A switch |
| 110 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6A switch outlet |
| 111 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16A switch outlet |
| 112 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 113 | Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as. required. |
| 114 | Supplying and fixing following rating, double pole, (single phase and netural), 240V, residual current circuit breaker(RCCB ), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 115 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required. |
| 116 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 117 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. Please Enable Macros to View BoQ information |
