|
| 1 | Item No. 1 -Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto adistance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Item No. 2 :-Excavation for foundation in Soft rock and old cement or lime masonry foundation sincluding removing the excavated material upto a distance of 50 metrs beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming ,watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means |
| 3 | Item No. 3 - Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete |
| 4 | Item No. 4:- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them ifspecial finish is to be provided, finishing if required and curing complete, with fullyautomatic micro processor based PLC with SCADA enabled reversible Drum Typemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushedsand VSI Grade) |
| 5 | Item No. 5:-Filling in plinth and floors with approved excavated material in 15cm.to 20cm. Layers including watering and compacting etc. complete. |
| 6 | Item No. 6:-Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. includingbailing out water, Steel centering, formwork ,cover blocks, laying/pumping,compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | Item No. 7:-Providing Laterite stone masonry in cement mortar 1:6 in foundation and plinth including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffoldings. |
| 8 | Item No.8:-Providing Laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffoldings. |
| 9 | Item No.9:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 10 | Item No. 10 - Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcementand structural steel) etc. complete, with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade |
| 11 | Item No. 11:-Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggreg |
| 12 | Item No:-12:- Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings includingsteel centering, formwork, cover blocks, laying/pumping, compacting and roughening thesurface if special finish is to be provided and curing complete. (Excluding reinforcementand structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) |
| 13 | Item No. 13:- Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detaileddesign and drawings or as directed including steel centering, plywood/ steelformwork, steel props, laying/pumping, compaction, finishing uneven andhoneycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening the surface if special finish is to be provided and curingetc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shallbe covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processorbased PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 14 | Item No. 14:- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 15 | Item No:-15:- Providing rough cast cement plaster externally in two coats to concrete,brick or stone masonry surfaces in al positions with base coat of 12 to15mm thick inC.M.1:4 and rough cast treatment 12mmthick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. |
| 16 | Item No. 16 - Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 17 | Item No:-17:-Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding ,preparing the surface, applying the acrylic wall putti etc. |
| 18 | Item No. 18:- Providing and laying Vitrified MATT STONE finish having decorative type tiles of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existingflooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed ofbonding chemical filling joints curing and cleaning etc. complete. |
| 19 | Item No:-19;- Providing and laying vitrified matt finish tiles having size590mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, fillingjoints,curing and cleaning etc. complete |
| 20 | Item No. 20:- Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing inC.M. 1:3 curing and cleaning etc. complete. |
| 21 | Item No. 21:- Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group DII-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/ colourcement slurry cleaning curing etc. complete. |
| 22 | Item No. 22:-Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 23 | Item No. 23:-Providing and fixing European type white glazed earthenware coupled closet symphonictrap with symphonic low level white glazed 10 litres cistern with black backliteseat with all necessary pipe connection etc. complete. |
| 24 | Item No. 24:-Providing and fixing white glazed earthenwareWash Hand Basin of 55cm. x 40cm. size including cold wate rpillar tap/cold and hotwater pillar tap brackets, rubber plugs and brasschain, stop tap and necessar ypipe connections includingP.V.C.waste pipe and trap upto the out side face of the wall. Making good the damaged surface,testing etc. complete. |
| 25 | Item No 25:- Providing and fixing White glazed with bottle trape arthen ware Wash Hand Basin of 55 x 40 cm size including cold water piller taps, brackets, rubber plug sand brass chain, stoptap, chromium plate bottle trap and necessary pipe connection sincluding UPAC waste pipe and trap upto the out side face of the wall ,making good the damaged surface, testing etc. complete. |
| 26 | Item No:-26:- Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 27 | Item No. 27:- Providing and constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channel shalf round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. |
| 28 | Item No:-28:- Providing and fixing 75 mm dia stabiliser pipe/P.V.C. soilvent /waste pipe and with necessary fixture sand fitting such as bends, tees, single junctions, slotted vent,clamps etc. complete |
| 29 | Item No. 29:- Providing and fixing on walls /ceiling /floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 30 | Item No:-30:- Providing and fixing on walls /ceiling /floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and convey ing and stacking the same in PWD chowky or as directed etc. complete. |
| 31 | Item No. 31:-Providing and fixing on walls /ceiling /floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 32 | Item No:-32:- Providing and fixing partition with kadapp as to ne of all size sand 25 mm thick polished on both side and edges to original including fixing in position icement mortor 1:4 curing polish- ing, cleaning etc complete. |
| 33 | Item No. 33:-Providing, laying and fixing, jointing Eco-drain 110 mm SN8Nu-Drain Upvc pipe so rofequivalent make, manufacture as per EN13476 or equivalent as per I.S. 15328 with fitting ssuch a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. |
| 34 | Item No:-34:-Providing, laying and fixing, jointing Eco-drain 160 mm SN 4Nu-Drain Upvc pipe so rofequivalent make, manufacture as per EN 13476 or equivalent as per I.S. 15328 with fitting ssuch a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. |
| 35 | Item No. 35:-Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 36 | Item No :-36:- Providing and fixing the Country cut teak wood second class fully glazed openablefanlight rectangular in shape as per detailed drawing excluding the frame,stainless steelfixtures and fastenings and finishing the wood work with 3 coats of oil painting. |
| 37 | Item No. 37:- Providing and fixing single leaf panelled door shutter without fanlight and shutter35 mm thick as per drawing consisting of T.W. top rail size 100mm x 35 mm and bottomand lock rail 200mm x 35mm insert panel 12 mm thick commercial ply faced T.W.particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI3097) excluding frame, including stainless steel fixtures fastening and T.W. beading atjunction of panels inserts and as instructed by the Engineer in charge including 3 coats ofoil painting etc. complete |
| 38 | Item No. 38:-Providing and fixing fiberglass reinforced polyster door shutter 35 mm thick as per IS14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete |
| 39 | Item No:-39:-Providing and fixing inposition powder coated aluminium louvered windows /ventilator of various sizes with powder coating as per detailed drawing and specific ations including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 40 | Item No. 40:- Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mmat weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre.The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/OneRunning Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/OneRunning Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/OneRunning Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Runningmetre. As per detailed drawings and as directed by Engineer in charge with allnecessary Aluminium sections fixtures and fastenings such as roller bearing in nyloncasting and self locking catch fitted in vertical section of shutter including 5 mm thickplain glass with all required screws and nuts etc, complete. With colour Anodising withbox |
| 41 | Item No:-41:- Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram /One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 42 | Item No:-42:- Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @ 250 mm c/c and fixing in wall with 6 Nos. of holdfast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm |
| 43 | Item No:-43:-Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. |
| 44 | Item No:-44:- Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. |
| 45 | Item No:-45:- Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing inC.M. 1:3 curing and cleaning etc. complete. |
| 46 | Item No:-46:- Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. |
| 47 | Item No:-47:- Providing and fixing H.D.P container one piece moulded watertank made out of low density polythyler and builtcorrugation including of delivery upto destination hoisting and ixing of accessories such as inlet,outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 48 | Item No:-48:- Providing and applying two coat sof exterior acraylice mulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastereds urfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary , and watering the surface for two days etc complete. |
| 49 | Item No:-49:- Providing and applying Plastic Emulsion Paint of approved colour and shade to old and new surfaces in two coat sincluding scaffolding, preparing the surfaces. (Includingg the primer coat.) etc. complete. |
| 50 | Item No:-50:- Providing and fixing 40 mm diameter and1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete |
| 51 | Item No:-51:- Providing and fixing name board of size 1.00 metre x 1.08 metre of M.S. sheet and 25x25x6 mm M.S. angle including fixing in ground, painting and lettering etc. complete. Please Enable Macros to View BoQ information |
