|
| 1 | General Civil & Interior works at Conference Hall, Council Hall, Presidents Room, Vice room, Front office & allied Works |
| 2 | 5.2.2Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | 5.3Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 4 | 5.9.3Centering and shuttering including strutting, etc. and removal of form for:Suspendedfloors, roofs, landings, balconies and access platform |
| 5 | 5.9.5Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 6 | 5.9.7Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) |
| 7 | 5.22.6Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 8 | 50.9.1.1Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood(Combined Quantity under subhead Conference Hall, Council hall & Presidents room- 0.08 cum each = 0.24 cum) |
| 9 | 50.9.2.1Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood(Combined Quantity under subhead Conference Hall, Council hall & Presidents room- ( 2.6 sqm each=12 sqm)) |
| 10 | 50.9.4.1Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood(Combined Quantity under subhead Conference Hall, Council hall & Presidents room- (4 sqm each=12 sqm)) |
| 11 | 13.68.1 French spirit polishing:Two or more coats on new works including a coat of wood filler(Combined Quantity under subhead Conference Hall, Council hall, Presidents room &Vice room - (12.012+12.012+15.015+6.006=45.045 sqm)) |
| 12 | 9.48.1Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding. |
| 13 | 50.10.1Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 14 | 9.117.2Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 42x50 mm(Combined Quantity under subhead Conference Hall & Presidents room-(16.8+5.6 m=22.4 m) |
| 15 | 9.118.1Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of Hsection, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).(Combined Quantity under subhead Conference Hall & Presidents room (4.5+1.5 =6 sqm )) |
| 16 | 50.6.1.5Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete(Combined Quantity under subhead Conference Hall & Presidents room- 19.331+3.522 =22.853 cum) |
| 17 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)(Combined Quantity under subhead Conference Hall, Council hall, Presidents & Vice room- (312.78,8.4,35.22,13.710 =370.11 sqm )) |
| 18 | 13.43.1Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 19 | 13.16.16 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 20 | 50.17.1.4Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.(Combined Quantity under subhead Conference Hall & Presidents room- (3+1=4 Nos)) |
| 21 | 50.17.1.2Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-incharge.(Combined Quantity under subhead Conference Hall & Presidents room- (3+1=4 Nos)) |
| 22 | 18.54.1Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms(Combined Quantity under subhead Conference Hall & Presidents room- (3+1=4 Nos)) |
| 23 | 17.2.1Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid(Combined Quantity under subhead Conference Hall & Presidents room- (3+1=4 Each)) |
| 24 | 17.7.4Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 25 | 50.18.7.3.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall |
| 26 | 50.18.7.6.2Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall |
| 27 | 50.18.8.9.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 |
| 28 | 8.31Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete(Combined Quantity under subhead Conference Hall & Presidents room- (33.852+16.548=50.4 sqm)) |
| 29 | 11.41.2Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.(Combined Quantity under subhead Conference Hall &Council Hall- (6.948+82.25=89.198 sqm)) |
| 30 | 11.48.2Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm |
| 31 | 15.3Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. |
| 32 | 15.7.4Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar(Combined Quantity under subhead Conference Hal, Council hall & Presidents room- (6.42+4.44+3.6=14.46 cum)) |
| 33 | 12.50Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 34 | OD420271/2025-2026WPC - Slat Wall Panels, Accent Slat Wood Slats for Wall and Ceilings, Panels for Interior Wall Wooden Polimer Composite Jali Modern Décor(Combined Quantity under subhead Council hall & Presidents room & Vice room- (14+6+1.125 = 21.125 sqm)) |
| 35 | OD398193/2025-2026Using good quality 18mm Plywood, 15 mm plywood &12 mm Marine Plywood with 1 mm Mica and inside painted finish, with drawer and cupboard, with sliding keyboard, file manager, steel handle, provision for CPU/UPS with lock and key. ( Stores purchase (A) Department, GO (Rt) No: 30/2024/SPD Dated 07/03/2024, Executive Table, measured over finished surface) as instructed by engineer in charge.(Combined Quantity under subhead Council hall, Presidents room & Vice room including front office- (29.980+1.8+2.370= 34.15 sqm)) |
| 36 | 15.12.1Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below(Combined Quantity under subhead Council hall & Presidents room- (1.68+2=3.68 each)) |
| 37 | OD420941/2025-2026Providing and fixing wall panelling using 19 mm thick BWP grade marine plywood over a 19 mm thick plywood framework, finished with 1 mm thick decorative laminate (mica), including supply of materials, fabrication, erection, tools, and all accessories complete(Combined Quantity under subhead Council hall, Presidents room & Vice room - (132.5+63.97+51.10= 247.57 sqm)) |
| 38 | OD398249/2025-2026ZEBRA Blind for Windows Dual Layer Zebra Roller Shades Light Filtering Sheer Window Treatments Privacy Light Control for day and night light weight fabric to allow maximum light diffusion. Excellent UV protection, insulation and energy savings. Fabric treated to resist stains and minimize dust built up.(Combined Quantity under subhead Council hall & Presidents room - (6.75+2.8 = 9.55 sqm)) |
| 39 | 12.45.3Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board(Combined Quantity under subhead Council hall, Presidents room & Vice room - (175.2+41.7+31.575= 248.475 sqm)) |
| 40 | OD398255/2025-2026Supplying and providing 304 grade Stainless Steel lettering for name board, fixing to the wall with necessary fittings and other arrangements including cost and conveyance of all material.(Combined Quantity under subhead Council hall, Presidents room & Vice room including front office- (18750+5720+6240=30710 sqcm)) |
| 41 | OD402262/2025-2026High quality leatherate finish high back officer chair with fixed amrest, adgustable for council conference hall with required colour and shape as directed by engineer in charge(Combined Quantity under subhead Council hall & Vice room - (35+1= 36 Nos)) |
| 42 | OD398264/2025-2026 High Back director chair with high quality leatherate finish box type/ individual arms, tilt mechanism, adjustable superior chair(Combined Quantity under subhead Council hall & Presidents room - (1+1=2 Nos)) |
| 43 | OD398286/2025-2026Exclusive Visitor Reception Chair with Arm Rest and Heavy Frame with CushionedSeat Back with matching finish as instructed by engineer in charge(Combined Quantity under subhead Council hall & Vice room/Visitors - (22+7=29 Nos)) |
| 44 | OD398287/2025-2026Officers Mid back revolving chair with good quality leatherate finish, fixed arm rest,tilt & adjustable superior chair |
| 45 | 10.25.2Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 46 | OD398294/2025-2026Supply Installation Testing & Commissioning of 42 inch (106 cm) Full HD TV of reputed brands such as Toshiba /Panasonic/LG/equivalent or higher available brand latest model with all necessary accesories, connectors, stabilizer etc complete |
| 47 | 21.18Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top ; bottom pivot double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)(Combined Quantity under subhead Council hall & Vice room/entrance - (21+7.65=28.65Sqm)) |
| 48 | 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(Combined Quantity under subhead Council hall & Presidents room & Vice room - (10+2+4=16 Nos) |
| 49 | OD398296/2025-2026Supply Installation Testing & Commissioning of 2 Ton Split Air Conditioner (AC) of reputed brands such as LG/Blue Star/Voltas/ equivalent or higher available brand with 3 Star or higher rating latest Model with all necessary accessories, connectors, mounting arrangements, stabilizer etc complete |
| 50 | 13.26Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.(Combined Quantity under subhead Council hall & Presidents room - (25.41+35.22=60.63 Sqm) |
| 51 | 13.48.1Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm(Combined Quantity under subhead Council hall, Presidents room & Voce Room - (71.31+42.24+32.7=146.25 Sqm) |
| 52 | OD398303/2025-2026Supply and fixing of Wool floor Carpet with 0.5 inch Thickness, easy to clean, soft, damp proof carpet having accptable colour and design as directed by engineer in charge |
| 53 | OD26310/2026-2027Setting up of Office wall rack by using good quality 18mm Plywood, 15 mm Marine plywood with 1 mm Mica and inside painted finish, with door including steel handle, multi lock nand auto hinges etc. complete as per Stores purchase (A) Department, GO(Rt) No: 0/2024/SPD Dated 07/03/2024, measured over finished top surface) as instructed by engineer in charge.(Combined Quantity under subhead Presidents room & Vice Presidents room - (10+3=13 sqm) |
| 54 | 17.7.3Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 55 | 11.41.4Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1000x1000 mm |
| 56 | 11.48.4Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy groutmix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 1000x1000 mm |
| 57 | OD398390/2025-2026Providing and fixing Granite of any colour and shade for Name board, of requiredsize laid over base of cement mortar 1:4 ( 1 cement : 4 coarse sand), including all charges etc. complete at all, levels, including lettering &; fixing |
| 58 | OD398407/2025-2026Dismantling laterite masonry - Dismanling , clearing away and carefully stackingmaterials useful for reuse for any thickness of walls in laterite masonry in cement mortar disposal of debris within a distance of 150 m. |
| 59 | 50.2.25.1Filling with contractors own earth ( excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge |
| 60 | 50.6.7.1Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. |
| 61 | 11.41.1Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm. |
| 62 | 9.88Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 63 | Sound System for Council Hall |
| 64 | OD403427/2025-2026Supply, installation, testing and commissioning of central mixer amplifier for digital wired conference system, suitable for operation of minimum 60 delegate units including chairman unit, complete with built-in minimum 50W PA amplifier and inbuilt digital recorder with recording and playback facility, supporting selectable conference modes such as Free, FIFO, Limit, Apply, Push-To-Talk (PTT), Voting facility mode and VIP priority, capable of handling minimum two independent groups of delegate units interconnected through CAT5/CAT6 cables (RJ45 interface), having frequency response of 100 Hz to 15 kHz or better, providing +18 dBu balanced audio output, signal-to-noise ratio of 96 dB or higher, with inbuilt Ethernet interface for system control and communication, suitable for operation on 230V AC, 50 Hz supply, complete with all necessary accessories, interconnections, connectors, mounting hardware, etc. as required for complete installation, of reputed make such as Ahuja, Studiomaster, MX or equivalent or better, with minimum 1 year onsite warranty, as required |
| 65 | OD403426/2025-2026Supply, installation, testing and commissioning of chairman unit for digital wired conference system, comprising table-top type unidirectional condenser microphone with flexible gooseneck stem and windshield, having frequency response of 100 Hz to 15 kHz or better, sensitivity of approximately 7 mV/Pa, impedance of 1000 ohms or better, complete with built-in speaker, microphone ON/OFF switch and indicator, connected through RJ45 interface using CAT5/CAT6 cable, compatible with central control unit, provided with chairman priority (VIP override) facility to control and override delegate units, including provision for initiating control functions such as voting (where applicable) Display ; LED indicator preferred, complete with all necessary accessories, interconnections, connectors, mounting arrangements, etc. as required for proper operation, of reputed make such as Ahuja, Studiomaster, MX, Sonodyne or equivalent or better, with minimum 1 year onsite warranty, as required. |
| 66 | OD398372/2025-2026Supply, installation, testing and commissioning of delegate unit for digital wired conference system, comprising table-top type unidirectional condenser microphone with flexible gooseneck stem and windshield, having frequency response of 100 Hz to 15 kHz or better, sensitivity of approximately 7 mV/Pa, impedance of 1000 ohms or better, complete with built-in speaker, microphone ON/OFF switch and indicator, connected through RJ45 interface using CAT5/CAT6 cable, compatible with central control unit, responsive to chairman priority (VIP override) commands, including provision for initiating control functions (where applicable) for unit identification complete with all necessary accessories, interconnections, connectors, mountingarrangements, cable management, etc. as required for proper operation, of reputed make such as Ahuja, Studiomaster, MX,or equivalent or higher, with minimum 1 year onsite warranty |
| 67 | OD398357/2025-2026 Supply, installation, testing and commissioning of compact high-fidelity 2-way wall speaker for conference system, comprising water-resistant polypropylene cone woofer, titanium dome tweeter, precision 2-way crossover network, suitable for 100V line operation with selectable transformer power taps 60?W, 30W, 20W, 15W, 7.5W, nominal impedance 8, capable of minimum 95?dB SPL @ 1?m, in robust ABS/PP enclosure in black or white finish, complete with adjustable wall mounting bracket, connectors, wiring, interconnections and all accessories, providing clear voice and music reproduction over frequency range 100?Hz to 18?kHz, suitable for operation on 230?V AC, 50?Hz supply, of reputed make such as Ahuja, JBL, Studiomaster, MX, Sonodyne, Yamaha or equivalent or better, with minimum 1 year onsite warranty, as required for complete installation. |
| 68 | OD403564/2025-2026Supply, installation, testing and commissioning of high wattage compact public address amplifier of approximately 250 W RMS output, with minimum 6 microphone and 2 auxiliary inputs, built-in MP3 player with USB/SD/MMC card reader and remote control (for DP version), preamplifier and line outputs for connection to booster amplifier, preamplifier output for recording, line input for external mixer, cut and boost type bass and treble controls, resettable overload/short circuit protection, instantaneous changeover to 24? V DC (car battery) on AC power failure, box speaker/driver selector switch, suitable frequency response 50? Hz to 15 kHz ±3?dB, speaker outputs for 4? Ω 8? Ω 70? V & 100 ?V, Bluetooth and USB connectivity, 5?LED array for output level monitoring, suitable for operation on 230?V AC, 50?Hz with all necessary connectors, interconnections and mounting hardware, of reputed make such as Ahuja, JBL, Studiomaster, MX, Sonodyne, Yamaha or equivalent or better, with minimum 1 year onsite warranty, as required for complete installation. |
| 69 | OD419735/2025-2026Supply, installation, testing and commissioning of compact high wattage publicaddress mixer with built-in digital MP3 recorder, having minimum 6 microphone and 2 auxiliary inputs with individual gain control, line input for external mixer, preamplifier and line outputs for connection to booster amplifier, preamplifier output for recording, cut and boost type bass and treble controls, resettable overload and short circuit protection, instantaneous transfer to 24?V DC (car battery) on AC power failure, suitable frequency response 50? Hz to 15 ?k Hz ±3?dB, speaker outputs for 4? ?, 8? ? 70? V and 100?V, Bluetooth and USB connectivity, 5 LED array for output level monitoring, suitable for operation on 230?V AC, 50?Hz, complete with all necessary connectors, interconnections, cabling, mounting hardware and accessories, of reputed make such as Ahuja, Studiomaster, MX, or equivalent or higher, with minimum 1 year onsite warranty, as required for complete installation |
| 70 | OD403649/2025-2026Supply, installation, testing and commissioning of premium digital speakermanagement system with minimum 4 inputs and 8 outputs, integrating advanced 24- bit/48?kHz DSP with high-speed processing for superior audio performance, providing per-channel minimum 16-band parametric EQ with variable Q factor for inputs and outputs, adjustable speaker output delay selectable up to 250?ms, front panel interactive LCD for local access and configuration, password protection to lock and unlock settings, easy and user-friendly PC software for end-to-end remote speaker control and management, effortless connectivity via standard 100?M Ethernet interface, complete with all necessary connectors, interconnections, cabling, mounting hardware and accessories, of reputed make such as Ahuja, Studiomaster, MX, or equivalent or higher , with minimum 1 year onsite warranty, as required for complete installation |
| 71 | OD403724/2025-2026Supply, installation, testing and commissioning of professional grade dual channel UHF wireless lapel microphone system, comprising two bodypack transmitters with lapel microphones and one dual-channel true diversity receiver, operating in UHF band with wide frequency range and selectable channels, having automatic frequency scanning and infrared (IR) synchronization between transmitter and receiver for quick setup, receiver provided with LCD display indicating frequency, RF/AF signal strength and battery status, system ensuring stable, interference-free transmission withminimum operating range of 75–100 m under line-of-sight conditions, complete with adjustable audio gain controls, low distortion (THD 1%), high signal-to-noise ratio, compatible with public address systems, auditoriums and conference setups, including all necessary accessories such as antennas, power adapters, audio cables, connectors, mounting hardware and carrying case of reputed make such as Ahuja/ Studiomaster / MX / Shure / AKG / Sennheiser or equivalent or higher, complete as required, with minimum 1 year onsite warranty. |
| 72 | OD403829/2025-2026High grade Category (CAT) cable HQ Coil 200 m of superior quality, consisting of multi?pair twisted copper conductors with overall FRLS/LSZH outer sheath, 4?pair unshielded/ shielded twisted pair cable meeting international standards such as TIA/EIA?568?C.2, ISO/IEC?11801 and suitable for Gigabit data transmission up to 1?Gbps or higher, supporting bandwidth up to 250?MHz, terminated with 8P8C modular connectors (RJ45) and colour?coded per TIA/EIA for wiring scheme for structured cabling |
| 73 | OD419886/2025-20261.7.1.Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 74 | OD403648/2025-2026Supply of floor-mount 22 U network/AV equipment rack and fitting and arrangement of equipments in rack |
| 75 | OD403725/2025-2026Supply, installation, testing and commissioning of high-quality audio interfacesuitable for professional conference, recording, or PA systems, supporting multiple analog and digital inputs and outputs, providing balanced line-level connections, gain control, phantom power for condenser microphones, low-noise preamplifiers, high resolution digital conversion, USB/Audio-over-Ethernet connectivity for integration with computers and networked audio systems, front panel indicators for signal and clipping, robust metal enclosure with mounting provision for rack or table-top use, complete with all necessary connectors, interconnections, cabling, mounting hardware and accessories, of reputed make such as Ahuja, Studiomaster, MX or equivalent or higher, with minimum 1 year onsite warranty, as required for complete installation. |
| 76 | OD403830/2025-2026High-quality shielded data/audio interface cable - 10 Mtr |
| 77 | OD17904/2026-2027Supply, installation, testing and commissioning of high?quality automatic voltagestabilizer of minimum 3000?VA/3?kVA capacity, single?phase input and output,suitable for operation on 230?V AC, 50?Hz supply, providing stable and regulated output voltage with wide input voltage acceptance, incorporating automatic voltage regulation technology for protection against over?voltage and under?voltage, built?in overload and short?circuit protection, selectable delay timer, efficient servo/AVR control circuitry, front panel voltage display (where applicable), low waveform distortion, suitable for protecting audio, video, communication and other sensitive electrical equipment, complete with all necessary connectors, interconnections, mounting hardware and accessories, of reputed make with minimum 1 year onsite warranty. |
| 78 | General Electrical Works |
| 79 | 9.1.22Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm) |
| 80 | 7.1.2Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm |
| 81 | 9.1.32Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) |
| 82 | 9.1.33Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 83 | 5.2Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal/ coke and salt) as required |
| 84 | 5.11Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earthelectrode including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required |
| 85 | 5.12Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required |
| 86 | 4.1.1Supplying and installing following size of perforated painted with powder coatingM.S. cable trays with perforation not more than 17.5%, in convenient sections,joined with connectors, suspended from the ceiling with M.S. suspendersincluding bolts & nuts, painting suspenders etc as required.100 mm width X 50 mm depth X 1.6 mm thickness |
| 87 | 2.3.1Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 volts, on surface/ recess, complete with tinned copperbus bar, neutral bus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator)6 way, Double door |
| 88 | 2.4.1 Supplying and fixing following way, horizontal type three pole and neutral, sheetsteel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 Way (4+12) Double door |
| 89 | 2.4.2Supplying and fixing following way, horizontal type three pole and neutral, sheetsteel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 Way (4+18), Double door |
| 90 | 1.8.1Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mmFRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A |
| 91 | 1.8.2Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mmFRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B |
| 92 | 1.21.3Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm |
| 93 | 1.24.1Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. asrequired.5/6 amps switch |
| 94 | 1.24.3Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. asrequired.15/16 amps switch |
| 95 | 1.24.5Supplying and fixing following modular switch/ socket on the existing modular plate &; switch box including connections but excluding modular plate etc. asrequired.6 pin 15/16 amp socket outlet |
| 96 | 1.24.6Supplying and fixing following modular switch/ socket on the existing modular plate &; switch box including connections but excluding modular plate etc. asrequired.Telephone socket outlet |
| 97 | 1.24.7Supplying and fixing following modular switch/ socket on the existing modular plate &; switch box including connections but excluding modular plate etc. asrequired.TV antenna socket outlet |
| 98 | 2.18Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning required. |
| 99 | 1.12Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 100 | 1.14.1Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface / recessedmedium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 101 | 1.14.2Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface / recessedmedium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 102 | 1.21.1Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 103 | 1.53.1Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable |
| 104 | 2.2.14Providing and fixing following rating and breaking capacity MCCB withthermomagnetic release and terminal spreaders in existing cubicle panel boardincluding drilling holes in cubicle panel. making connections. etc. as required.125 Amp, 36 KA |
| 105 | 2.10.3Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole |
| 106 | 2.10.5Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral |
| 107 | 2.13.1Supplying and fixing following rating, four pole, 415 volts, isolator in the existingMCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 108 | 2.15.1Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required. 25 amps |
| 109 | 2.15.2Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required. 40 amps Please Enable Macros to View BoQ information |
